Description | Roller Bearing Sliding System
48.5 lb Load Capacity
Chrome-Plated 8mm Steel Rails
Index Markings on Rails
Folding and Adjustable Legs
Integrated Bubble Level and Brake
3/8"-16 Tie-Down Screw
Rail Cleaning Device
Carrying Bag
Optional Motorroid Motion Control System | Awpro.tv | Awpro.tv | Simple configuration and easy installation. Sliding fine manual available. Stable and precise shooting finer shooting range. Material: Aluminium. Small size. Light weight. Easy mobility. Applicated with slidecam. Legs can be fixed, higher than applicability. Can be use low angle moving shoot. | Awpro.tv | - Lets You Capture Shots from High Angles
- Lets You Fluidly Scale Through a Scene
- Pulley Wire Tilt Adjustment
- Supports Loads Up to 6.6 lb
- Weighs Only 11 lb
- Multi-Slot/Thread Camera & Tripod Plates
- Durable H-Beam Design
- Supports Standard Size Weight Plates
- Box Shaped Carry Case
- Bubble Level
|
Content | Featuring 8mm steel rails, the Varavon Slidecam S 1200 is a camera slider that lets you add smooth linear motion with loads up to 48.5 pounds. The track measures 47.2" long, just under 2" wide, and features index markings on the top of the rails for precise and repeatable start and stop points. The slider platform rides on three roller bearings for smooth operation, with an integrated brake letting you secure the carriage in place at any point along the rails for locked-down shots or when transporting the slider. The platform features a 3/8"-16 mounting screw for attaching a ball head or fluid head, with a thumbwheel at the side of the platform used to tighten the head to the carriage. Threaded mounting holes on the at the ends and underside of the track allow for mounting on tripods stands. For ground level or tabletop shots, the slider features a folding leg system with adjustable feet provides leveling and two points of articulation, so you can support the slider on almost any hard surface, smooth, or uneven. An included rail cleaning device fits snugly on the rails and cleans them of debris, so you can avoid pitting of the rails or track wheels. The included carry bag and shoulder strap allow you to pack up and take your slider with you, making it a completely portable solution.
Key Features
48.5 lb load capacity
8mm steel rails
Chrome-coated rails to prevent rusting
Carriage with three large roller bearings for smooth and silent motion
Index marks on top of rails
Folding and adjustable legs adapt to almost any terrain
Legs fold in for narrow width use
Integrated brake
Leveling bubble
Applications: Flip, crane, slope, and vertical shooting
Optional Motorroid motion control system | Awpro.tv | The ?Wirecam Set with HDMI Transceiver ?from ?Varavon ?is a remote-controlled wire camera system. The Wirecam acts like an aerial camera dolly or slider system allowing the camera to track or slide along a suspended cable with tracking up to over 300'. The Wirecam can support a recommended load of up to 19.8lbs, and is suitable for productions like stage events and sports, or for creating unique camera shots and perspectives for almost any type of production. The set includes the Wirecam, an HDMI transceiver, a battery and charger, a rope, a remote, and a carrying case.?Wirecam- 35mm ball-head allows angle adjustments to achieve your ideal shooting angle
- Two safety loop bolts are located on either end of the unit to prevent the wire from falling off of the wheel
- Six installed dampers absorb micro vibrations while the WireCam is functioning
- Graupner / SJ MZ-12HoTT 2.4GHz Controller prevents outside frequency interference using a duplex hopping technique
- 164' nylon climbing rope with a 6mm diameter and a tensile strength of up to 1772 pounds
HDMI Transceiver- up to 1080p60 resolution
- DTV and VESA video formats
- HDMI over wireless/Ethernet
- 500' at line of site
- Multicasting with up to three receivers using Wi-Fi
- Easy push-button operation
- No cables required
| The Varavon Slide Cam Lite 600 is a 2 ft long camera slider with a ball-bearing slide mechanism that's tension-adjustable at the use of included wrenches. Two removable and height adjustable legs are also included and can raise the slider up to 2 inches off of the ground. You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.The slider weighs under 3 lbs and supports up to 20 lbs of weight, although 7 to 13 lbs is the ideal weight range for smooth glides. The plate atop the rails features a 3/8" screw compatible with all standard ball heads and has two locking pins to lock the head in. It also has a stop break for immediate stops and a bubble level to indicate how straight or angled the slider is positioned. | Awpro.tv | The Varavon TILTJIB T3 9.5 ft MiniJIB allows you to capture shots from high angles, as well as scale across scenes with fluid, cinematic movements. Consisting mainly of three bars and two pulley wires, the TILTJIB T3 assembles to a full length of 9.5 ft, and mounts on a tripod with approximately 6 ft of length remaining past the mounting point. The pulley wires ensure that your camera will tilt up and down in accordance with your movement of the jib, based on your initial positioning of the camera.The three bars are made of lightweight materials (with the entire jib totaling to 11 lb) and have an H-Beam design, altogether allowing for better handling and more durability. The optimal load is around 2-4 lb, but a max load of 6.6 lb is ultimately supported.The camera and tripod mount plates, which securely attach to the bars, are multi-slotted/threaded, supporting various cameras and mounting positions. A bubble level is available on the tripod mount plate for measuring if your position is even. A counterweight bar is included for attaching optional, standard size counterweight plates. A box shaped carrying case, with a compartmentalized foam interior, is included for transport and neat storage.Key Features- Lets you capture shots from high angles and scale across scenes with cinematic movements
- Pulley wire system tilts your camera up and down in accordance with your movement of the jib
- Supports loads up to 6.6 lb
- Weighs only 11 lb
|