| Description | - Lets You Capture Shots from High Angles
- Lets You Fluidly Scale Through a Scene
- Pulley Wire Tilt Adjustment
- Supports Loads Up to 6.6 lb
- Weighs Only 7.3 lb
- Multi-Slot/Thread Camera & Tripod Plates
- Durable H-Beam Design
- Supports Standard Size Weight Plates
- Box Shaped Carry Case
| - Motor, Pulley, and Belt Add-On
- Belt Suitable for Sliders up to 59"
- Carriage Saddle for Belt Attachment
- Adjustable Belt Tension
- Left / Stop / Right Control Switch
- Acceleration Dial
- Limit Sensors & Limit Clips
- Optional Timeroid Controller
- DC Power Input & AC Power Adapter
| The Slidecam LS has 3 Roller bearings and chrome shaft provides smooth sliding movement. Thin and light, yet powerful Details Block Feature 3 Roller Bearings3 Perfectly balanced bearings. | For Camera Systems up to 5.5 lb Camera Smoothly Follows Your Movements Counteracts Unwanted Movement and Shake Adjustable Camera Platform Pan/Tilt Joystick Control Bluetooth Interface for Configuration 10,400mAh Lithium-Ion Battery Balancing Stand & Storage Case Included | Simple configuration and easy installation. Sliding fine manual available. Stable and precise shooting finer shooting range. Material: Aluminium. Small size. Light weight. Easy mobility. Applicated with slidecam. Legs can be fixed, higher than applicability. Can be use low angle moving shoot. | Awpro.tv |
| Content | The Varavon TILTJIB T2 6.2 ft MiniJIB allows you to capture shots from high angles, as well as scale across scenes with fluid, cinematic movements. Consisting mainly of two bars and two pulley wires, the TILTJIB T2 assembles to a full length of 6.2 ft, and mounts on a tripod with approximately 4 ft of length remaining past the mounting point. The pulley wires ensure that your camera will tilt up and down in accordance with your movement of the jib, based on your initial positioning of the camera.The two bars are made of lightweight materials (with the entire jib totaling to 7.3 lb) and have an H-Beam design, altogether allowing for better handling and more durability. The optimal load is around 2-4 lb, but a max load of 6.6 lb is ultimately supported.The camera and tripod mount plates, which securely attach to the bars, are multi-slotted/threaded, supporting various cameras and mounting positions. A bubble level is available on the tripod mount plate for measuring if your position is even. A counterweight bar is included for attaching optional, standard size counterweight plates. A box shaped carrying case, with a compartmentalized foam interior, is included for transport and neat storage.Key Features- Lets you capture shots from high angles and scale across scenes with cinematic movements
- Pulley wire system tilts your camera up and down in accordance with your movement of the jib
- Supports loads up to 6.6 lb
- Weighs only 7.3 lb
| The Motorroid L 1500 Slider Motorized Kit from Varavon is an add-on for select Slidecam camera sliders that turns the slider into a motorized system. It features a motor, pulley system, and a saddle for attaching an included belt to the camera carriage. This version includes a belt compatible with Slidecam LITE, Slidecam V, Slidecam S, and EX PLUS models up to 59" in length. The motor and pulley system mounts easily to the ends of the tripod and doesn't interfere with leg movement. Simple left, right, and stop movement control is performed using a single switch, with a dial providing acceleration adjustment. Limit sensors ensure that the motor doesn't keep running when the camera carriage reaches either end of the track. For shorter, repeatable slides, a pair of included limit clips can be placed onto the belt and will trigger the limit sensors to stop movement. When more advanced and programmable control is needed, including camera shutter release for time-lapse videos, an optional Timeroid controller is available. To power the motor, the kit includes a 110 to 240 VAC power adapter, though it can also be powered using a separately available battery pack for enhanced mobility. Compatibility Slidecam LITE 486/600/800/1000/1200
Slidecam V 600/800/1000/1200/1500
Slidecam S 900/1200/1500
EX PLUS 800/1000 Key Features - Geared motor and passive pulley attachment sections
- Easy belt and saddle to slider connection
- Adjustable belt tension
- Acceleration dial
- Left / Stop / Right movement switch
- Limit sensors automatically stop motor when camera carriage reaches end of track
- Limit clip easily placed on the belt
- Attachments don't interfere with slider legs
- Optional Timeroid controller for programmable movement
- AC power adapter
- Optional battery pack
| Awpro.tv | The Varavon Birdycam II is a handheld motorized 3-axis gimbal stabilization system for cameras weighing up to 5.5 pounds. It allows you to capture smooth, fluid shots whether you're actively following the subject, or the subject is simply passing by you. The camera platform is adjustable to support a variety of small to mid-sized cameras, including DSLRs, mirrorless cameras like the Sony a7s or GH4, and the Blackmagic Cinema Camera or Production Camera 4K. The steering handle moves along three axes (up/down, left/right, and sideways), and your camera hangs suspended on a gimbal in the center and smoothly follows your movements. Even without the motors running, the gimbal balances out relatively smoothly, but with the motors on, the stabilizer counteracts unwanted movements and shake to keep your camera stable. Additionally, there's also a thumb-control joystick on the steering handle that lets you pan and tilt the gimbal without moving the handle itself. The motors are powered by up to two Varavon batteries, with one battery provided with the stabilizer. A stand is also included for setting the Birdycam down. All the components come to you in a compartmentalized case with soft foam interior and requiring hardly any assembly. Key Features - 3-axis motorized stabilization system
- 32-bit AlexMos board
- Camera hangs suspended on a gimbal in the center and smoothly follows your movements
- Pan/tilt thumb-control joystick
- Supports optional RC transmitter for remote control of pan/tilt
- Adjustable camera platform supports various small to mid-size cameras
- Supports cameras weighing up to 5.5 pounds
- Bluetooth connectivity lets you use an Android mobile device to adjust and configure settings
- 10,400mAh lithium-ion battery included
- 1/4"-20 threads of attaching optional accessories
- Standard dovetail on the handle bar and main body for easy installation and compatibility with the Varavon's optional Wirecam system
- Reference scale marks and locking knob for easier gimbal balancing
- Balancing stand included with height adjustable feet and bubble level
- Storage case with soft foam interior
| The Varavon Slide Cam Lite 600 is a 2 ft long camera slider with a ball-bearing slide mechanism that's tension-adjustable at the use of included wrenches. Two removable and height adjustable legs are also included and can raise the slider up to 2 inches off of the ground. You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.The slider weighs under 3 lbs and supports up to 20 lbs of weight, although 7 to 13 lbs is the ideal weight range for smooth glides. The plate atop the rails features a 3/8" screw compatible with all standard ball heads and has two locking pins to lock the head in. It also has a stop break for immediate stops and a bubble level to indicate how straight or angled the slider is positioned. | The ?Wirecam Set with HDMI Transceiver ?from ?Varavon ?is a remote-controlled wire camera system. The Wirecam acts like an aerial camera dolly or slider system allowing the camera to track or slide along a suspended cable with tracking up to over 300'. The Wirecam can support a recommended load of up to 19.8lbs, and is suitable for productions like stage events and sports, or for creating unique camera shots and perspectives for almost any type of production. The set includes the Wirecam, an HDMI transceiver, a battery and charger, a rope, a remote, and a carrying case.?Wirecam- 35mm ball-head allows angle adjustments to achieve your ideal shooting angle
- Two safety loop bolts are located on either end of the unit to prevent the wire from falling off of the wheel
- Six installed dampers absorb micro vibrations while the WireCam is functioning
- Graupner / SJ MZ-12HoTT 2.4GHz Controller prevents outside frequency interference using a duplex hopping technique
- 164' nylon climbing rope with a 6mm diameter and a tensile strength of up to 1772 pounds
HDMI Transceiver- up to 1080p60 resolution
- DTV and VESA video formats
- HDMI over wireless/Ethernet
- 500' at line of site
- Multicasting with up to three receivers using Wi-Fi
- Easy push-button operation
- No cables required
|
