Description | - Motor, Pulley, and Belt Add-On
- Belt Suitable for Sliders up to 59"
- Carriage Saddle for Belt Attachment
- Adjustable Belt Tension
- Left / Stop / Right Control Switch
- Acceleration Dial
- Limit Sensors & Limit Clips
- Optional Timeroid Controller
- DC Power Input & AC Power Adapter
| Simple configuration and easy installation. Sliding fine manual available. Stable and precise shooting finer shooting range. Material: Aluminium. Small size. Light weight. Easy mobility. Applicated with slidecam. Legs can be fixed, higher than applicability. Can be use low angle moving shoot. | Awpro.tv | - 47" Camera Slider Supports 44 lb
- Ball Bearing Rollers
- Height Adjustable Removable Legs
- 3/8" Screw Compatible w/ Standard Heads
- Adjustable Friction Break
- Integrated Bubble Level
- Indexed Rails for Repeatable Moves
- Oil Seal for Cleaning Rails
- Carrying Case with Shoulder Strap
| Varavon Armor II Body - Hand Strap - 15mm Rod - ENG Handgrip - Top Handle - Allen Wrenches - Cold Shoe - HDMI Adapter - Box - Varavon 1 Year Warranty Compatibility: Canon EOS 5D Mark III Camera Handle Length: 160 x 62mm / 6.30 x 2.44" Dimensions (Dia. x L): Rod: 15 x 152mm / 0.59 x 5.98" Weight: Total: 659g / 23.25ozBody: 333g / 11.75ozHandle: 326g / 11.50oz | Awpro.tv |
Content | The Motorroid L 1500 Slider Motorized Kit from Varavon is an add-on for select Slidecam camera sliders that turns the slider into a motorized system. It features a motor, pulley system, and a saddle for attaching an included belt to the camera carriage. This version includes a belt compatible with Slidecam LITE, Slidecam V, Slidecam S, and EX PLUS models up to 59" in length. The motor and pulley system mounts easily to the ends of the tripod and doesn't interfere with leg movement. Simple left, right, and stop movement control is performed using a single switch, with a dial providing acceleration adjustment. Limit sensors ensure that the motor doesn't keep running when the camera carriage reaches either end of the track. For shorter, repeatable slides, a pair of included limit clips can be placed onto the belt and will trigger the limit sensors to stop movement. When more advanced and programmable control is needed, including camera shutter release for time-lapse videos, an optional Timeroid controller is available. To power the motor, the kit includes a 110 to 240 VAC power adapter, though it can also be powered using a separately available battery pack for enhanced mobility. Compatibility Slidecam LITE 486/600/800/1000/1200
Slidecam V 600/800/1000/1200/1500
Slidecam S 900/1200/1500
EX PLUS 800/1000 Key Features - Geared motor and passive pulley attachment sections
- Easy belt and saddle to slider connection
- Adjustable belt tension
- Acceleration dial
- Left / Stop / Right movement switch
- Limit sensors automatically stop motor when camera carriage reaches end of track
- Limit clip easily placed on the belt
- Attachments don't interfere with slider legs
- Optional Timeroid controller for programmable movement
- AC power adapter
- Optional battery pack
| The Varavon Slide Cam Lite 600 is a 2 ft long camera slider with a ball-bearing slide mechanism that's tension-adjustable at the use of included wrenches. Two removable and height adjustable legs are also included and can raise the slider up to 2 inches off of the ground. You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.The slider weighs under 3 lbs and supports up to 20 lbs of weight, although 7 to 13 lbs is the ideal weight range for smooth glides. The plate atop the rails features a 3/8" screw compatible with all standard ball heads and has two locking pins to lock the head in. It also has a stop break for immediate stops and a bubble level to indicate how straight or angled the slider is positioned. | Awpro.tv | The ?Varavon Slidecam V-1200 Camera Slider ?is approximately 47" long and features three ball bearing sliding rollers. The slider track incorporates three sets of 1/4"-20 and 3/8"-16 mounting holes, allowing you to support it in the center or at both ends. Two removable height adjustable legs are also included for using the slider on the ground. The legs provide height adjustment for leveling, and are articulated, allowing you to adjust them for rough surfaces.The slider weighs under 6.5 lbs and supports up to 44 lbs of weight, The slider carriage features a 3/8"-16 threaded mounting screw with a large thumb wheel to tighten down available flat base heads. It features a friction break mechanism that can apply tension, or lock the carriage in place along the rails. The carriage incorporates a built-in bubble level that allows you to confirm the level of the track. The track is pre-indexed so you can measure and repeat your move precisely. The included oil seal is used to clean and oil the chrome plated track, and you can use the included carry case for transport of storage. | Adding protection, stability, and accessory mounting options, the Varavon ARMOR II Standard Cage for Canon EOS 5D Mark III prepares your Canon 5D Mark III camera for video production work. For handheld shooting, a top handle in included, as well as a leather hand strap that attaches to the right side cage. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot. The cage offers a variety of accessory mounting options. A 15mm rod port is integrated into the left side of the cage that is adjustable to position a rod in front or behind the camera. A 6" long rod is included that, when position in front of the camera, is useful for mounting an optional follow focus. Positioning it behind the camera lets you mount an optional external battery, shoulder stock, or other accessory. In addition to the rod port on the side of the cage, there are also two rod ports on the top handle. One of the ports allows you to place a 15mm rod centered above the lens, while the other lets you position a rod horizontally above the camera, useful for mounting an external monitor or EVF. For further accessory mounting, there are 1/4"-20 and 3/8"-16 threaded hole on all sides of the cage. There are also 1/4"-20 threads on the top handle as well as an included cold shoe mount that screws into the front of the handle. For added convenience, the screws used to mount the camera, attach the top handle, and attach the cold shoe adapter are tightened in place using the same Allen wrench, which is safely stored into a slot on the side of the top handle. For cable security, the left side of the cage features a built-in cable clamping system that helps prevents connected cable from accidentally being pulled out while shooting. Key Features - Formfitting design retains the camera's body shape
- Leaves access open to SD card slot, battery compartment, and all buttons/controls
- Leather hand strap
- Top handle with removable cold shoe mount
- Side 15mm rod port for front or back positioning of included 6" rod
- Two rod ports on top handle for positioning a rod parallel or perpendicular to the camera
- 6" long 15mm rod included
- 1/4"-20 and 3/8"-16 accessory mounting threads
- Cable clamp
- HDMI adapter included
| The ?Wirecam Set with HDMI Transceiver ?from ?Varavon ?is a remote-controlled wire camera system. The Wirecam acts like an aerial camera dolly or slider system allowing the camera to track or slide along a suspended cable with tracking up to over 300'. The Wirecam can support a recommended load of up to 19.8lbs, and is suitable for productions like stage events and sports, or for creating unique camera shots and perspectives for almost any type of production. The set includes the Wirecam, an HDMI transceiver, a battery and charger, a rope, a remote, and a carrying case.?Wirecam- 35mm ball-head allows angle adjustments to achieve your ideal shooting angle
- Two safety loop bolts are located on either end of the unit to prevent the wire from falling off of the wheel
- Six installed dampers absorb micro vibrations while the WireCam is functioning
- Graupner / SJ MZ-12HoTT 2.4GHz Controller prevents outside frequency interference using a duplex hopping technique
- 164' nylon climbing rope with a 6mm diameter and a tensile strength of up to 1772 pounds
HDMI Transceiver- up to 1080p60 resolution
- DTV and VESA video formats
- HDMI over wireless/Ethernet
- 500' at line of site
- Multicasting with up to three receivers using Wi-Fi
- Easy push-button operation
- No cables required
|