| Description | Roller Bearing Sliding System
48.5 lb Load Capacity
Chrome-Plated 8mm Steel Rails
Index Markings on Rails
Folding and Adjustable Legs
Integrated Bubble Level and Brake
3/8"-16 Tie-Down Screw
Rail Cleaning Device
Carrying Bag
Optional Motorroid Motion Control System | Simple configuration and easy installation. Sliding fine manual available. Stable and precise shooting finer shooting range. Material: Aluminium. Small size. Light weight. Easy mobility. Applicated with slidecam. Legs can be fixed, higher than applicability. Can be use low angle moving shoot. | - Roller Bearing Sliding System
- 22kg Load Capacity
- Chrome-Plated 8mm Steel Rails
- Index Markings on Rails
- Folding and Adjustable Legs
- Integrated Bubble Level and Brake
- 3/8"-16 Tie-Down Screw
- Rail Cleaning Device
- Carrying Bag
- Optional Motorroid Motion Control System
| - Lets You Capture Shots from High Angles
- Lets You Fluidly Scale Through a Scene
- Pulley Wire Tilt Adjustment
- Supports Loads Up to 6.6 lb
- Weighs Only 11 lb
- Multi-Slot/Thread Camera & Tripod Plates
- Durable H-Beam Design
- Supports Standard Size Weight Plates
- Box Shaped Carry Case
- Bubble Level
| Varavon Armor II Body - Hand Strap - 15mm Rod - ENG Handgrip - Top Handle - Allen Wrenches - Cold Shoe - HDMI Adapter - Box - Varavon 1 Year Warranty Compatibility: Canon EOS 5D Mark III Camera Handle Length: 160 x 62mm / 6.30 x 2.44" Dimensions (Dia. x L): Rod: 15 x 152mm / 0.59 x 5.98" Weight: Total: 659g / 23.25ozBody: 333g / 11.75ozHandle: 326g / 11.50oz | Awpro.tv |
| Content | Featuring 8mm steel rails, the Varavon Slidecam S 1200 is a camera slider that lets you add smooth linear motion with loads up to 48.5 pounds. The track measures 47.2" long, just under 2" wide, and features index markings on the top of the rails for precise and repeatable start and stop points. The slider platform rides on three roller bearings for smooth operation, with an integrated brake letting you secure the carriage in place at any point along the rails for locked-down shots or when transporting the slider. The platform features a 3/8"-16 mounting screw for attaching a ball head or fluid head, with a thumbwheel at the side of the platform used to tighten the head to the carriage. Threaded mounting holes on the at the ends and underside of the track allow for mounting on tripods stands. For ground level or tabletop shots, the slider features a folding leg system with adjustable feet provides leveling and two points of articulation, so you can support the slider on almost any hard surface, smooth, or uneven. An included rail cleaning device fits snugly on the rails and cleans them of debris, so you can avoid pitting of the rails or track wheels. The included carry bag and shoulder strap allow you to pack up and take your slider with you, making it a completely portable solution.
Key Features
48.5 lb load capacity
8mm steel rails
Chrome-coated rails to prevent rusting
Carriage with three large roller bearings for smooth and silent motion
Index marks on top of rails
Folding and adjustable legs adapt to almost any terrain
Legs fold in for narrow width use
Integrated brake
Leveling bubble
Applications: Flip, crane, slope, and vertical shooting
Optional Motorroid motion control system | The Varavon Slide Cam Lite 600 is a 2 ft long camera slider with a ball-bearing slide mechanism that's tension-adjustable at the use of included wrenches. Two removable and height adjustable legs are also included and can raise the slider up to 2 inches off of the ground. You can angle the slider to get straight horizontal shots, or you can slope it on a tripod, position it vertically on a tripod, use it as a crane on a tripod, or even attach it flipped over on two tripods.The slider weighs under 3 lbs and supports up to 20 lbs of weight, although 7 to 13 lbs is the ideal weight range for smooth glides. The plate atop the rails features a 3/8" screw compatible with all standard ball heads and has two locking pins to lock the head in. It also has a stop break for immediate stops and a bubble level to indicate how straight or angled the slider is positioned. | Featuring 8mm steel rails, the Varavon Slidecam S 1500 is a camera slider that lets you add smooth linear motion with loads up to 22kg . The track measures 59" long, just under 2" wide, and features index markings on the top of the rails for precise and repeatable start and stop points. The slider platform rides on three roller bearings for smooth operation, with an integrated brake letting you secure the carriage in place at any point along the rails for locked-down shots or when transporting the slider. The platform features a 3/8"-16 mounting screw for attaching a ball head or fluid head, with a thumbwheel at the side of the platform used to tighten the head to the carriage. Threaded mounting holes on the at the ends and underside of the track allow for mounting on tripods stands. For ground level or tabletop shots, the slider features a folding leg system with adjustable feet provides leveling and two points of articulation, so you can support the slider on almost any hard surface, smooth, or uneven. An included rail cleaning device fits snugly on the rails and cleans them of debris, so you can avoid pitting of the rails or track wheels. The included carry bag and shoulder strap allow you to pack up and take your slider with you, making it a completely portable solution. Key Features - 22kg load capacity
- 8mm steel rails
- Chrome-coated rails to prevent rusting
- Carriage with three large roller bearings for smooth and silent motion
- Index marks on top of rails
- Folding and adjustable legs adapt to almost any terrain
- Legs fold in for narrow width use
- Integrated brake
- Leveling bubble
- Applications: Flip, crane, slope, and vertical shooting
- Optional Motorroid motion control system
| The Varavon TILTJIB T3 9.5 ft MiniJIB allows you to capture shots from high angles, as well as scale across scenes with fluid, cinematic movements. Consisting mainly of three bars and two pulley wires, the TILTJIB T3 assembles to a full length of 9.5 ft, and mounts on a tripod with approximately 6 ft of length remaining past the mounting point. The pulley wires ensure that your camera will tilt up and down in accordance with your movement of the jib, based on your initial positioning of the camera.The three bars are made of lightweight materials (with the entire jib totaling to 11 lb) and have an H-Beam design, altogether allowing for better handling and more durability. The optimal load is around 2-4 lb, but a max load of 6.6 lb is ultimately supported.The camera and tripod mount plates, which securely attach to the bars, are multi-slotted/threaded, supporting various cameras and mounting positions. A bubble level is available on the tripod mount plate for measuring if your position is even. A counterweight bar is included for attaching optional, standard size counterweight plates. A box shaped carrying case, with a compartmentalized foam interior, is included for transport and neat storage.Key Features- Lets you capture shots from high angles and scale across scenes with cinematic movements
- Pulley wire system tilts your camera up and down in accordance with your movement of the jib
- Supports loads up to 6.6 lb
- Weighs only 11 lb
| Adding protection, stability, and accessory mounting options, the Varavon ARMOR II Standard Cage for Canon EOS 5D Mark III prepares your Canon 5D Mark III camera for video production work. For handheld shooting, a top handle in included, as well as a leather hand strap that attaches to the right side cage. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot. The cage offers a variety of accessory mounting options. A 15mm rod port is integrated into the left side of the cage that is adjustable to position a rod in front or behind the camera. A 6" long rod is included that, when position in front of the camera, is useful for mounting an optional follow focus. Positioning it behind the camera lets you mount an optional external battery, shoulder stock, or other accessory. In addition to the rod port on the side of the cage, there are also two rod ports on the top handle. One of the ports allows you to place a 15mm rod centered above the lens, while the other lets you position a rod horizontally above the camera, useful for mounting an external monitor or EVF. For further accessory mounting, there are 1/4"-20 and 3/8"-16 threaded hole on all sides of the cage. There are also 1/4"-20 threads on the top handle as well as an included cold shoe mount that screws into the front of the handle. For added convenience, the screws used to mount the camera, attach the top handle, and attach the cold shoe adapter are tightened in place using the same Allen wrench, which is safely stored into a slot on the side of the top handle. For cable security, the left side of the cage features a built-in cable clamping system that helps prevents connected cable from accidentally being pulled out while shooting. Key Features - Formfitting design retains the camera's body shape
- Leaves access open to SD card slot, battery compartment, and all buttons/controls
- Leather hand strap
- Top handle with removable cold shoe mount
- Side 15mm rod port for front or back positioning of included 6" rod
- Two rod ports on top handle for positioning a rod parallel or perpendicular to the camera
- 6" long 15mm rod included
- 1/4"-20 and 3/8"-16 accessory mounting threads
- Cable clamp
- HDMI adapter included
| Awpro.tv |
