Assured Gift with each Purchase
Assured Gift with each Purchase
637.06 د.إ
Excl. VAT
Key features
This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone’s shockmount or cable run.
Rode VideoMic GO Camera-Mount Shotgun Microphone
Longer than Rode’s VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.
This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
Easy Hookup to Camera
A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Runs on Plug-In Power
No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.
Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).
Windscreen Minimizes Wind Noise
The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).
Connectivity Options
Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396
Auray WSW-VMG Custom Windbuster for Rode VideoMic GO
The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.
This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.
When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone.
The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection.
Fits:
Rode VideoMic GO
| Settings | Rode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield remove | Rode NT5 Cardioid Studio Condenser Microphones (Matched Pair) remove | Rode Broadcaster Condenser Microphone remove | Rode HS2 Lightweight Headset Microphone Pink/Large remove | Rode K2 - Variable Pattern Studio Tube Condenser Microphone remove | Rode NT45-C Replacement Cardioid Capsule remove |
|---|---|---|---|---|---|---|
| Name | Rode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield remove | Rode NT5 Cardioid Studio Condenser Microphones (Matched Pair) remove | Rode Broadcaster Condenser Microphone remove | Rode HS2 Lightweight Headset Microphone Pink/Large remove | Rode K2 - Variable Pattern Studio Tube Condenser Microphone remove | Rode NT45-C Replacement Cardioid Capsule remove |
| Image | |  |  |  |  |  |
| SKU | AWP010908 | |||||
| Rating | ||||||
| Price | 637.06 د.إ Excl. VAT | 2,204.20 د.إ Excl. VAT | 2,152.82 د.إ Excl. VAT | 1,536.26 د.إ Excl. VAT | 3,591.46 د.إ Excl. VAT | 457.28 د.إ Excl. VAT |
| Stock |
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
| Availability | Out of stock | Out of stock | Out of stock | Out of stock | Out of stock | Out of stock |
| Add to cart | ||||||
| Description | Key features
| Key features
| Key features
| Key features
| Awpro.tv | Key features
|
| Content | This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone's shockmount or cable run. Rode VideoMic GO Camera-Mount Shotgun Microphone Longer than Rode's VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry. This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device. Shotgun Mic with Directional Sound Pickup Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders. Easy Hookup to Camera A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder. Runs on Plug-In Power No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries. Integrated Shockmount Inhibits Vibrations Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately). Windscreen Minimizes Wind Noise The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately). Connectivity Options Expand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396 Auray WSW-VMG Custom Windbuster for Rode VideoMic GO The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss. This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound. When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone. The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection. Fits: Rode VideoMic GO | The Rode NT5 is a matched pair of small diaphragm microphones featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement. The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage, monitors, additional instruments, etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum overhead miking, stereo capturing of instruments, vocal capturing, etc. The NT5 is powered via +24V or +48V phantom power. The package includes two windscreens, two mic clips, and a custom case. Cardioid Pattern The cardioid polar pattern is effective in minimizing off-axis noise due to leakage, additional instruments, room ambiance, etc. Wide Frequency Response The NT5 features a frequency response of 20 Hz to 20 kHz allowing the flexibility to capture accurately in any recording or sound reinforcement scenario.. | The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use. It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded. The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. HF2 1" capsule with gold-plated diaphragmOn-Air indicator LEDLow noiseVoice-tailored low-cut featureInternal pop filter. | The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth. Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual. Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters. Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications. | The K2 Variable Pattern Dual 1.0" Condenser Valve Microphone from Rode delivers the sonic quality expected of a Class-A tube microphone. At the heart of the microphone is a hand-selected 6922 twin-triode valve. The valve provides warmth and detail while reproducing a flat, uncolored frequency response. The K2 boasts a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transients. An external power supply provides user access of up to 3 polar patterns. Cardioid, omnidirectional, and figure eight are all available and the patterns are user variable, allowing custom contouring of each pattern as needed. Class-A Valve Circuitry At the heart of the microphone is a hand-selected 6922 twin-triode valve. The tube electronics yield the warmth and transparency expected of Class-A analog electronics. Variable Polar Patterns The K2 features cardioid, omni-directional, and figure-eight polar patterns. The patterns are user variable, allowing custom contouring of each pattern as needed. Wide Dynamic Range The microphone features a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transient signals. | The Rode NT45C is a replacement cardioid capsule for the Rode NT4, NT5, NT6 and NT55 large diaphragm condenser microphones. The capsule is designed to provide identical sonic character to that of the original. . |
| Weight | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Vinay KumarFriendly staff and a one stop store for all camera gears and accessories.Nkats RaynzThank you suleman bin Ali for your good service I will recommend all my friends to visit your store and meet you thanks again and you are the best. CheersRami SamourVery good company, deliver same day..aljon mallariAccommodating and easy transaction with them.Shehara RizlyOur Salesperson Basith made it a very pleasant experience as we wanted a good deal on a new video camera. He continued to help us get a good price on XA60 Canon video camera. The speedy response to all our queries and ensuring our experience was good, Abdulbasith really made us purchase more than just a camera but some accessories too.Mariam Alkaabiقبل امس طلبت المغرب و امس وصلت التوصيل سريييع ، انا البموظف طرشلي كل المعلومات الي احتاجهم وطرشلي لنك للدفع كلشي كان بسهوله!! مابطلتها بس حبيييييت الحجم والعرض كنت طالبه بلاكقراوند ما شاء الله🤩Eric BurgyVery good shop and good guys !Steven CheakAmazing professionalism. So impressedSaoirse ArtThank you for the great service.. i ordered twice already to AWPRO BR 1 , just the second order delivery was a bit late but it was okay, good thing im not in a hurry. Thanks to Mohamad Emad to make my order and delivery possible.. Keep up the Good work guys! Thank you Instagram : Saoirseart.portraits Thank you!OMEGA FILM MediaExcellent and speedy service, very good deal, special thanks to Emad for making everything smooth. Highly recommend.
