| Content | This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone's shockmount or cable run.
Rode VideoMic GO Camera-Mount Shotgun Microphone
Longer than Rode's VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
Easy Hookup to Camera
A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Runs on Plug-In Power
No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.
Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).
Windscreen Minimizes Wind Noise
The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).
Connectivity Options
Expand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396
Auray WSW-VMG Custom Windbuster for Rode VideoMic GO
The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone.The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection.
Fits:
Rode VideoMic GO | The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragmOn-Air indicator LEDLow noiseVoice-tailored low-cut featureInternal pop filter. | The lightning connector version of the R? DE iXY Stereo Microphone is designed for portable audio recording applications using a Lightning connector iOS device (e.g. iPhone 5/s/c). It can be used for recording music, interviews, sound design, film-making, and more. The device features a metal housing to help reduce electromagnetic interference around two condenser microphone elements positioned in an XY configuration and an integrated iClamp for securing the microphone to your mobile device. The unit can records at up to 24-bit 96 kHz resolution using the R? DE Rec App, available from the Apple iTunes App store. A 72 Hz high pass filter can be engaged in software to reduce unwanted low frequency noise.
XY Pair Microphone Pattern
Provides stereo audio pickup pattern with realistic spatial imaging
Metal Housing
Protects device physically and helps reduce electromagnetic interference
Software 72 Hz High Pass Filter
Reduces unwanted low frequency noise
iClamp
Secures iXY to mobile device
Foam Windshield
Helps reduce wind noise from being picked up by the microphones
Zippered Carrying Case
Protects condenser elements from dust when not in use. | The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 0.5" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.
Battery or Phantom-Powered Condenser
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
Cardioid Polar Pattern
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
-10 dB and -20 dB Pad Switch
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
High-Pass Filter
A high-pass filter switch eliminates noise and hum at the lower frequency range. | The NT2000 Variable Pattern Studio Condenser Microphone from RODE is a studio-quality, large diaphragm condenser microphone with continuously variable polar patterns. Its polar patterns selection, filter, and pad are conveniently located on the front of the microphone body for ease of use. The gold-sputtered, dual 1" capsule provides low self-noise (7 dB-A) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged).
Dual Diaphragm Design
A 1" edge terminated, gold sputtered, dual 5uM diaphragm yields a wide frequency response of 20 Hz to 20 kHz with a max SPL of 147 dB. The dual diaphragm design provides flexible pattern and sensitivity response, making it versatile in any scenario.
Variable Polar Patterns
Cardioid, omnidirectional, and figure 8 patterns are user selectable. Continuously variable variations of each allow tailoring of all patterns resulting in perfect pick up settings with each use.
Variable Attenuation
Continuously variable attenuation adjusts impedance response allowing transparent, distortion free pick-up of transient signals. Attenuation range is user variable between 0 to -10 dB.
Variable High Pass Filter
The NT2000 also features a user variable high-pass filter. This provides flexible user contouring over frequency response curves. | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. |
