Content | The Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.Libec LX10 Two-Stage Aluminum Tripod System
The head features discreet pan and tilt locks. And also the removable pan handle can attached to either side of the head by via the built-in rosettes.The sliding balance plate features a total of four inches of balance adjustment . Two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included ground-level spreader prevents the tripod's legs from flying apart and is suitable for use on flat, level surfaces. | Libec EX-160S Track Rail Extension w/Case
This Libec EX-160S Track Rail Extension w/Case is quick and easy to set up. This lightweight aluminum rail can be your solution for when you need just a bit more track to roll on, or when you have a specific need for a short track layout. This extension is straight, 6' long (1.8 m) and interfaces perfectly with the Libec TR-320 track system. | The Control Cable for REMO30 Remote Pan and Tilt Head from Libec is a 16.5' remote control cable that can be used to control the REMO30 pan and tilt head,Control cable for REMO30 pan & tilt remote head, LANC and monitorExtend up to 99' in length (with optional cables) for remote operations with no signal interruptions. | The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily. This set completes a 90 degree turn, and interfaces perfectly with the Libec track system. | | The Libec AS-7K Accessory Support Kit will allow you to attach LCD monitors, microphones, and others accessories to your camera and accessory plate. Using the A7 Accessory Support Adapter included in the kit, AS-7K Accessory Support Kit can also fixed to other Libec heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. With the help of a shoe adapter, the detachable ball head can attached to the camera. The shoe adapter can also attached to the body of an accessory support item when not required.Supports equipment for attaching LCD monitors, microphones, and other accessories to a camera and accessory plate. Includes an A7 Accessory Support Adapter that can used to affix the AS-7K Accessory Support Kit to other heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. Using the shoe adapter, the detachable ball head can attached to cameras. The shoe adapter can also attached to the body of an accessory support item when not required |