Description | Key features | Key features- Control Cable for REMO30 Remote Head
- 16.5' Cable
- Extend Up to 99' w/Optional Cables
| Key features- For Use With Swift Jib50 Weight Bar
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 43.5" Travel Distance
- 47" Total Track Length
| Key features- For Fujinon Broadcast Lenses, ZC-9Pro, ZC-9EX
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
|
Content | Libec EX-160S Track Rail Extension w/Case
This Libec EX-160S Track Rail Extension w/Case is quick and easy to set up. This lightweight aluminum rail can be your solution for when you need just a bit more track to roll on, or when you have a specific need for a short track layout. This extension is straight, 6' long (1.8 m) and interfaces perfectly with the Libec TR-320 track system. | The Control Cable for REMO30 Remote Pan and Tilt Head from Libec is a 16.5' remote control cable that can be used to control the REMO30 pan and tilt head,Control cable for REMO30 pan & tilt remote head, LANC and monitorExtend up to 99' in length (with optional cables) for remote operations with no signal interruptions. | This Clamp Handle for Swift Jib50 Weight Bar from Libec is an accessory for the Swift Jib50 which assures smooth operation from the rear of the Swift Jib50. The clamp handle is clamped to the Swift Jib50's weight bar and a remote control (not included) can be attached to the handle. | The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.Key Features- 43.5" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector. | The Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a spreader dolly, and the system is height-adjustable from 36 to 73.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.Libec LX10 Studio Two-Stage Aluminum Tripod System
The sliding balance plate features a total of four inches of balance adjustment. Two inches forward and also two inches back of center. This does not take into account the integrated balance slot. That allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included spreader dolly secures your tripod's legs. But allows you to roll your tripod from one point to another on a smooth surface. It can used during a shot, but it is not as smooth as a true dolly. |