Description | Key Features- Arca-Type Plate for SmallRig Cages
- Rubber Pads to Protect Cage
- Spring-Loaded Anti-Slip Pins
- Open Access to Camera Mounting Screw
| Key Features- Formfitting Camera Half Cage
- Quick Release Camera Plate
- NATO Rail on Left Side
- ARRI-Style Accessory Mounts
| Key Features- Arca-Type Compatible Clamp for Gimbals
- Installs via Two 1/4"-20 Screws
- Index Markings on Both Sides of Clamp
- Vertical or Horizontal Installation
| Key Features- Rosette Mounting Plate for Ronin-S/SC
- Also Fits Zhiyun CRANE 3 & WEEBILL S/LAB
- Mount 5" Monitor on Handheld Gimbal
- Load Capacity of 2.2 lb
Attach a 5" monitor to the handle of your DJI Ronin-S/SC, Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB handheld gimbal with this ?SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane. | Key Features- Aluminum Side Handle for Camera Cage
- For Right- or Left-Hand Use
- ARRI-Style Locating Pin Mount
- 3 x 1/4"-20 Accessory Threads
The ?Aluminum ARRI-Style Mount Side Handle ?from ?SmallRig ?mounts securely onto your camera cage's anti-twist 3/8"-16 thread. This aluminum handle can be configured for right- or left-side use and slides up and down for optimal positioning. | Key Features- Y-Shaped Universal Lens Support
- 15mm LWS Rod Bracket
- Half-Rod Clamp Design for Quick Release
- 0.2" Horizontal Adjustment
The dark olive ?BSL2644 15mm LWS Universal Lens Support ?from ?SmallRig ?can be used to support a longer lens on your camera when used with a separately available 15mm LWS rod system. |
Content | Add a quick release plate to your ? SmallRig Arca-Type Quick Release Plate ?camera cage with this ?Arca-Type Quick Release Plate. The lightweight aluminum plate attaches to the bottom of the cage with the two included 1/4"-20 screws and can fit in a standard Arca-type base.The Plate has an open-middle design so you can access the camera mounting screw through the plate. This design allows the plate to stay attached to the cage, and you can easily unmount the camera from the cage to move it to a gimbal, tripod, or other mounts. The Plate features rubber pads to protect the cage and it has spring-loaded anti-slip pins to prevent twisting.The plate is currently compatible with the following SmallRig cages. Check with the manufacturer for compatibility if you don't see your model below.Note:
This is not compatible with SmallRig baseplate 2035 or 1934.CompatibilityNikon
Z7/Z6 Cage 2243Sony
a7 III, a7R III Series Cages 2087, 2176
a6 Series Cages 1661, 2310, 2082
a7 II, a7R II, a7S II Series Cages 1982, 1660
a7, a7S, a7R Cage 1815
a9 Cage 2013SmallRig Arca-Type Quick Release Plate
RX0 Cage 2106
RX0 II Cage 2344
RX100 M5, M5A, M4, M3 Cage 2105
RX100 VI 2225Blackmagic Design
BMPCC 6K and 4K Cages 2203, 2254
BMPCC Cage 2012 SmallRig Arca-Type Quick Release PlateFujifilm
X-T2 Cage 1881
X-T3 Cage 2229
X-H1 Cage 2123, 2124Panasonic
GH5, GH5S Cage 2049
GH4 Cage 1585
GX85, GX80, GX7II Cage 1828 SmallRig Arca-Type Quick Release Plate
G85, G80 Cage 1950
S1, S1R Cage 2345Canon
EOS 70D, 80D Cage 1789
1DX, 1DX Mark II Cage 2365Olympus
EM1II Cage 2086GoPro
HERO 7, 6, 5 Cage 2320 | The ?SmallRig Arca QR Half Cage ?provides accessory mounting and quick release convenience for your Sony a7R III, a7 III, a7 II, a7R II, or a7S II mirrorless camera. The built-in Arca-type compatible camera mount allows you to quickly mount and unmount your camera between rigs.Elevate your Sony A7 series camera with SmallRig's Arca QR Half Cage 2238. Crafted for A7R III/A7 III/A7 II/A7R II/A7S II, it ensures a secure fit, while its robust build provides durability. The cage features Arca Swiss QR plate compatibility, allowing seamless transitions between your cage and other accessories.With multiple 1/4"-20 and 3/8"-16 threaded holes, it offers extensive mounting options for accessories like monitors and also microphones. The half cage design maintains easy access to camera controls. SmallRig's attention to detail makes this cage a reliable choice for filmmakers, enhancing your shooting experience with stability and also adaptability.
Accessory SmallRig Arca QR Half Cage mounting options include a NATO rail, 1/4"-20 and 3/8"-16 threads, and also ARRI-style mounting threads to add a handle, arm extension, monitor, microphone, light, or another accessory. This formfitting half cage maintains access to the camera's controls and ports.CompatibilitySony a7R III, a7 III, a7 II, a7R II, and also a7S II cameras | This sturdy aluminum ?SmallRig Arca-Type Quick Release Clamp ?is designed to lock a camera with an Arca-type L-bracket or Arca-type plate onto the DJI Ronin-S/-SC gimbal. It installs on your gimbal in either vertical or horizontal position and secures an Arca-type plate by tightening a knurled thumbscrew.Index markings on both sides of the clamp make it easy and fast to rebalance when removing and reinstalling your camera on the gimbal. The M4 threaded accessory holes are for mounting a Ronin-S or Ronin-SC follow focus motor. It can also serve as a riser plate when using a large-diameter lens.Optimize your gimbal setup with SmallRig's Arca-Type Quick Release Clamp (DBC2506). Designed for DJI Ronin S/SC, ZHIYUN Crane Series, and also Weebill S Gimbals. This clamp streamlines your workflow with seamless Arca-Swiss compatibility.The precision-engineered design ensures secure mounting and also quick release. Allowing for efficient transitions between setups. Crafted for durability with high-quality materials, it provides a reliable foundation for your gear.Simplify your rigging process and enhance the versatility of your gimbal system with. SmallRig's Arca-Type Quick Release Clamp—an essential accessory for filmmakers. And also content creators who value precision and efficiency in their equipment. Compatibility- DJI Ronin-S
- DJI Ronin-SC
- Zhiyun CRANE-2
- Zhiyun CRANE-3
- Zhiyun WEEBILL LAB
- Zhiyun WEEBILL-S
- Moza Air 2
| Attach a 5" monitor to the handle of your DJI Ronin-S/SC, Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB handheld gimbal with this ? SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane.The mount attaches to the mounting threads of the Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB with a built-in thumbscrew, and a rosette plate is included to attach the mount to the Ronin-S or Ronin-SC with two included M4 screws.The SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane durable aluminum mount features 1/4"-20 monitor mounting thumbscrew as well as three 1/4"-20 threads and a shoe mount for additional accessories. The monitor bracket features 180 ? tilt and can hold a monitor rig up to 2.2 lb. An Allen wrench is also included to tighten the mounting screws. See below for the list of compatible monitors.Gimbal Compatibility
DJI Ronin-S
DJI Ronin-SC
Zhiyun CRANE 3 LAB
Zhiyun WEEBILL S
Zhiyun WEEBILL LABMonitor Compatibility
Any 5" monitor kit that weighs less than 2.2 lb
SmallHD Focus Series monitorsSmallRig Adjustable Monitor Mount
SmallHD Focus OLED series monitors
SmallHD UltraBright series monitors
SmallHD 500 series monitors
SmallHD 700 series monitors
Atomos Ninja series monitors
Blackmagic Design Video Assist 5" monitors | The ? Smallrig Aluminum Arri Locating Side Handle HSS2426 ?mounts securely onto your camera cage's anti-twist 3/8"-16 thread. This aluminum handle can configure for right- or left-side use and slides up and also down for optimal positioning. The top of the handle features three 1/4"-20 threads and also one cold shoe mount for adding a light, microphone, monitor, mounting arm, or other accessory.The Aluminum ARRI-Style Mount Side Handle features a non-slip silicone grip and includes an Allen wrench that can be stored within the handle.Elevate your camera rig with the SmallRig Aluminum Arri Locating Side Handle (HSS2426). Craft for precision and comfort, this handle provides a secure grip and also easy accessory mounting. The Arri locating points enable swift and also secure attachment, ensuring stability during shooting.The handle's versatile design allows adjustment to fit your ergonomic preferences. Enhancing your overall shooting experience. Construct from high-quality aluminum, it offers durability without adding unnecessary weight. Upgrade your rig with this SmallRig handle, combining functionality and also style for a seamless filmmaking or photography experience. | The dark olive ?BSL2644 15mm LWS Universal Lens Support ?from ?SmallRig ?can be used to support a longer lens on your camera when use with a separately available 15mm LWS rod system. The rod bracket has a half-open design so the support can quickly mounted and removed. This unit's center column attaches to a Y-shaped lens support and offers 0.2" of horizontal adjustment.Enhance your videography with the SmallRig 15mm LWS Universal Lens Support BSL2644, a versatile accessory designed for optimal lens stability. Crafted with precision, this support system is compatible with a variety of lenses, providing essential reinforcement during dynamic shots.The adjustable height and width accommodate diverse lens sizes, ensuring a secure fit for your specific gear. The 15mm LWS (Lightweight System) standard ensures seamless integration with your existing rig, offering flexibility and ease of use.The anti-slip surface and dual-screw design enhance stability, preventing unwanted movement and vibrations during filming. Whether you're capturing fast-paced action or slow, controlled shots, SmallRig's Universal Lens Support is a reliable tool to maximize.The potential of your lens collection, bringing an extra layer of confidence to your creative endeavors. Elevate your videography experience with this essential SmallRig accessory. |