| Description | Key Features- Arca-Type Compatible Clamp for Gimbals
- Installs via Two 1/4"-20 Screws
- Index Markings on Both Sides of Clamp
- Vertical or Horizontal Installation
| Key Features- Pair of 15mm Rods
- Lightweight Carbon Fiber Construction
This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 12" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. | Key Features- Arca-Type Plate for SmallRig Cages
- Rubber Pads to Protect Cage
- Spring-Loaded Anti-Slip Pins
- Open Access to Camera Mounting Screw
| Key Features- Pair of 15mm Rods
- Lightweight Carbon Fiber Construction
This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 18" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. | SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304
1. 8 inches ARRI dovetail plate;
2. Multiple 1/4? ? -20 and 3/8? ? -16 threaded holes;
3. Multiple through slots;
4. Safety pins on both sides.SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304 ?is compatible with ARRI baseplate such as ?SmallRig 1642, ?2266, ?2035, etc. It features multiple 1/4? ? -20 and 3/8? ? -16 threaded holes for tripod attachment. It also comes with several through slots where you can put in screws for tripod attachment, or mounting to ?SmallRig Shoulder Pad 2057. On both sides there are safety pins preventing the camera rig from accidentally sliding off. | Key Features- Formfitting Camera Cage
- 2 x Integrated Cold Shoes
- 1/4"-20, 3/8"-16 & ARRI-Style Threads
- 1 x ARRI-Style Rosette
Protect and add accessories to your a7 series mirrorless camera with the ?1815 Camera Cage for Sony a7/a7S/a7R ?from ?SmallRig. This formfitting cage features a variety of accessory mounting options and maintains access to both the camera's controls and hot shoe. |
| Content | This sturdy aluminum ?SmallRig Arca-Type Quick Release Clamp ?is designed to lock a camera with an Arca-type L-bracket or Arca-type plate onto the DJI Ronin-S/-SC gimbal. It installs on your gimbal in either vertical or horizontal position and secures an Arca-type plate by tightening a knurled thumbscrew.Index markings on both sides of the clamp make it easy and fast to rebalance when removing and reinstalling your camera on the gimbal. The M4 threaded accessory holes are for mounting a Ronin-S or Ronin-SC follow focus motor. It can also serve as a riser plate when using a large-diameter lens.Optimize your gimbal setup with SmallRig's Arca-Type Quick Release Clamp (DBC2506). Designed for DJI Ronin S/SC, ZHIYUN Crane Series, and also Weebill S Gimbals. This clamp streamlines your workflow with seamless Arca-Swiss compatibility.The precision-engineered design ensures secure mounting and also quick release. Allowing for efficient transitions between setups. Crafted for durability with high-quality materials, it provides a reliable foundation for your gear.Simplify your rigging process and enhance the versatility of your gimbal system with. SmallRig's Arca-Type Quick Release Clamp—an essential accessory for filmmakers. And also content creators who value precision and efficiency in their equipment. Compatibility- DJI Ronin-S
- DJI Ronin-SC
- Zhiyun CRANE-2
- Zhiyun CRANE-3
- Zhiyun WEEBILL LAB
- Zhiyun WEEBILL-S
- Moza Air 2
| This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 12" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. | Add a quick release plate to your ? SmallRig Arca-Type Quick Release Plate ?camera cage with this ?Arca-Type Quick Release Plate. The lightweight aluminum plate attaches to the bottom of the cage with the two included 1/4"-20 screws and can fit in a standard Arca-type base.The Plate has an open-middle design so you can access the camera mounting screw through the plate. This design allows the plate to stay attached to the cage, and you can easily unmount the camera from the cage to move it to a gimbal, tripod, or other mounts. The Plate features rubber pads to protect the cage and it has spring-loaded anti-slip pins to prevent twisting.The plate is currently compatible with the following SmallRig cages. Check with the manufacturer for compatibility if you don't see your model below.Note:
This is not compatible with SmallRig baseplate 2035 or 1934.CompatibilityNikon
Z7/Z6 Cage 2243Sony
a7 III, a7R III Series Cages 2087, 2176
a6 Series Cages 1661, 2310, 2082
a7 II, a7R II, a7S II Series Cages 1982, 1660
a7, a7S, a7R Cage 1815
a9 Cage 2013SmallRig Arca-Type Quick Release Plate
RX0 Cage 2106
RX0 II Cage 2344
RX100 M5, M5A, M4, M3 Cage 2105
RX100 VI 2225Blackmagic Design
BMPCC 6K and 4K Cages 2203, 2254
BMPCC Cage 2012 SmallRig Arca-Type Quick Release PlateFujifilm
X-T2 Cage 1881
X-T3 Cage 2229
X-H1 Cage 2123, 2124Panasonic
GH5, GH5S Cage 2049
GH4 Cage 1585
GX85, GX80, GX7II Cage 1828 SmallRig Arca-Type Quick Release Plate
G85, G80 Cage 1950
S1, S1R Cage 2345Canon
EOS 70D, 80D Cage 1789
1DX, 1DX Mark II Cage 2365Olympus
EM1II Cage 2086GoPro
HERO 7, 6, 5 Cage 2320 | This ?SmallRig 15mm Carbon Fiber Rod 45cm ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 18" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting.The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. SmallRig 15mm Carbon Fiber Rods (2pcs, 45cm/18 inch) 871 provide a robust foundation for your camera rig.Crafted with lightweight carbon fiber, these durable rods are essential for building a customized setup. The 18-inch length offers ample space for attaching accessories like matte boxes, follow focuses, or also other gear to enhance your filmmaking or photography experience.Designed with precision, these rods seamlessly integrate into your workflow. Providing stability for your essential camera accessories. Elevate your creative possibilities with SmallRig's reliable carbon fiber rods. Combining strength and also versatility to meet the demands of your professional videography or also photography endeavors. | SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304
Key Features:
1. 8 inches ARRI dovetail plate;
2. Multiple 1/4? ? -20 and 3/8? ? -16 threaded holes;
3. Multiple through slots;
4. Safety pins on both sides.SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304 ?is compatible with ARRI baseplate such as ?SmallRig 1642, ?2266, ?2035, etc. It features multiple 1/4? ? -20 and 3/8? ? -16 threaded holes for tripod attachment. It also comes with several through slots where you can put in screws for tripod attachment, or mounting to ?SmallRig Shoulder Pad 2057. On both sides there are safety pins preventing the camera rig from accidentally sliding off. | Protect and add accessories to your a7 series mirrorless camera with the ?1815 Camera Cage for Sony a7/a7S/a7R ?from ?SmallRig. This formfitting cage features a variety of accessory mounting options and maintains access to both the camera's controls and hot shoe.In addition to two cold shoes and multiple 1/4"-20 and 3/8"-16 accessory threads, the 1815 cage features several ARRI-style accessory threads for preventing accessories from twisting when mounted on the cage. A single ARRI-style rosette enables you to mount a separately available handgrip or handle. The bottom of this anti-twist cage is designed to mount onto compatible Arca-Swiss-style bases.Compatibility |
