| Description | Roller Bearing Sliding System
48.5 lb Load Capacity
Chrome-Plated 8mm Steel Rails
Index Markings on Rails
Folding and Adjustable Legs
Integrated Bubble Level and Brake
3/8"-16 Tie-Down Screw
Rail Cleaning Device
Carrying Bag
Optional Motorroid Motion Control System | - Lets You Capture Shots from High Angles
- Lets You Fluidly Scale Through a Scene
- Pulley Wire Tilt Adjustment
- Supports Loads Up to 6.6 lb
- Weighs Only 11 lb
- Multi-Slot/Thread Camera & Tripod Plates
- Durable H-Beam Design
- Supports Standard Size Weight Plates
- Box Shaped Carry Case
- Bubble Level
| - 47" Camera Slider Supports 44 lb
- Ball Bearing Rollers
- Height Adjustable Removable Legs
- 3/8" Screw Compatible w/ Standard Heads
- Adjustable Friction Break
- Integrated Bubble Level
- Indexed Rails for Repeatable Moves
- Oil Seal for Cleaning Rails
- Carrying Case with Shoulder Strap
| Varavon Armor II Body - Hand Strap - 15mm Rod - ENG Handgrip - Top Handle - Allen Wrenches - Cold Shoe - HDMI Adapter - Box - Varavon 1 Year Warranty Compatibility: Canon EOS 5D Mark III Camera Handle Length: 160 x 62mm / 6.30 x 2.44" Dimensions (Dia. x L): Rod: 15 x 152mm / 0.59 x 5.98" Weight: Total: 659g / 23.25ozBody: 333g / 11.75ozHandle: 326g / 11.50oz | The Slidecam LS has 3 Roller bearings and chrome shaft provides smooth sliding movement. Thin and light, yet powerful Details Block Feature 3 Roller Bearings3 Perfectly balanced bearings. | Awpro.tv |
| Content | Featuring 8mm steel rails, the Varavon Slidecam S 1200 is a camera slider that lets you add smooth linear motion with loads up to 48.5 pounds. The track measures 47.2" long, just under 2" wide, and features index markings on the top of the rails for precise and repeatable start and stop points. The slider platform rides on three roller bearings for smooth operation, with an integrated brake letting you secure the carriage in place at any point along the rails for locked-down shots or when transporting the slider. The platform features a 3/8"-16 mounting screw for attaching a ball head or fluid head, with a thumbwheel at the side of the platform used to tighten the head to the carriage. Threaded mounting holes on the at the ends and underside of the track allow for mounting on tripods stands. For ground level or tabletop shots, the slider features a folding leg system with adjustable feet provides leveling and two points of articulation, so you can support the slider on almost any hard surface, smooth, or uneven. An included rail cleaning device fits snugly on the rails and cleans them of debris, so you can avoid pitting of the rails or track wheels. The included carry bag and shoulder strap allow you to pack up and take your slider with you, making it a completely portable solution.
Key Features
48.5 lb load capacity
8mm steel rails
Chrome-coated rails to prevent rusting
Carriage with three large roller bearings for smooth and silent motion
Index marks on top of rails
Folding and adjustable legs adapt to almost any terrain
Legs fold in for narrow width use
Integrated brake
Leveling bubble
Applications: Flip, crane, slope, and vertical shooting
Optional Motorroid motion control system | The Varavon TILTJIB T3 9.5 ft MiniJIB allows you to capture shots from high angles, as well as scale across scenes with fluid, cinematic movements. Consisting mainly of three bars and two pulley wires, the TILTJIB T3 assembles to a full length of 9.5 ft, and mounts on a tripod with approximately 6 ft of length remaining past the mounting point. The pulley wires ensure that your camera will tilt up and down in accordance with your movement of the jib, based on your initial positioning of the camera.The three bars are made of lightweight materials (with the entire jib totaling to 11 lb) and have an H-Beam design, altogether allowing for better handling and more durability. The optimal load is around 2-4 lb, but a max load of 6.6 lb is ultimately supported.The camera and tripod mount plates, which securely attach to the bars, are multi-slotted/threaded, supporting various cameras and mounting positions. A bubble level is available on the tripod mount plate for measuring if your position is even. A counterweight bar is included for attaching optional, standard size counterweight plates. A box shaped carrying case, with a compartmentalized foam interior, is included for transport and neat storage.Key Features- Lets you capture shots from high angles and scale across scenes with cinematic movements
- Pulley wire system tilts your camera up and down in accordance with your movement of the jib
- Supports loads up to 6.6 lb
- Weighs only 11 lb
| The ?Varavon Slidecam V-1200 Camera Slider ?is approximately 47" long and features three ball bearing sliding rollers. The slider track incorporates three sets of 1/4"-20 and 3/8"-16 mounting holes, allowing you to support it in the center or at both ends. Two removable height adjustable legs are also included for using the slider on the ground. The legs provide height adjustment for leveling, and are articulated, allowing you to adjust them for rough surfaces.The slider weighs under 6.5 lbs and supports up to 44 lbs of weight, The slider carriage features a 3/8"-16 threaded mounting screw with a large thumb wheel to tighten down available flat base heads. It features a friction break mechanism that can apply tension, or lock the carriage in place along the rails. The carriage incorporates a built-in bubble level that allows you to confirm the level of the track. The track is pre-indexed so you can measure and repeat your move precisely. The included oil seal is used to clean and oil the chrome plated track, and you can use the included carry case for transport of storage. | Adding protection, stability, and accessory mounting options, the Varavon ARMOR II Standard Cage for Canon EOS 5D Mark III prepares your Canon 5D Mark III camera for video production work. For handheld shooting, a top handle in included, as well as a leather hand strap that attaches to the right side cage. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot. The cage offers a variety of accessory mounting options. A 15mm rod port is integrated into the left side of the cage that is adjustable to position a rod in front or behind the camera. A 6" long rod is included that, when position in front of the camera, is useful for mounting an optional follow focus. Positioning it behind the camera lets you mount an optional external battery, shoulder stock, or other accessory. In addition to the rod port on the side of the cage, there are also two rod ports on the top handle. One of the ports allows you to place a 15mm rod centered above the lens, while the other lets you position a rod horizontally above the camera, useful for mounting an external monitor or EVF. For further accessory mounting, there are 1/4"-20 and 3/8"-16 threaded hole on all sides of the cage. There are also 1/4"-20 threads on the top handle as well as an included cold shoe mount that screws into the front of the handle. For added convenience, the screws used to mount the camera, attach the top handle, and attach the cold shoe adapter are tightened in place using the same Allen wrench, which is safely stored into a slot on the side of the top handle. For cable security, the left side of the cage features a built-in cable clamping system that helps prevents connected cable from accidentally being pulled out while shooting. Key Features - Formfitting design retains the camera's body shape
- Leaves access open to SD card slot, battery compartment, and all buttons/controls
- Leather hand strap
- Top handle with removable cold shoe mount
- Side 15mm rod port for front or back positioning of included 6" rod
- Two rod ports on top handle for positioning a rod parallel or perpendicular to the camera
- 6" long 15mm rod included
- 1/4"-20 and 3/8"-16 accessory mounting threads
- Cable clamp
- HDMI adapter included
| Awpro.tv | The ?Wirecam Set with HDMI Transceiver ?from ?Varavon ?is a remote-controlled wire camera system. The Wirecam acts like an aerial camera dolly or slider system allowing the camera to track or slide along a suspended cable with tracking up to over 300'. The Wirecam can support a recommended load of up to 19.8lbs, and is suitable for productions like stage events and sports, or for creating unique camera shots and perspectives for almost any type of production. The set includes the Wirecam, an HDMI transceiver, a battery and charger, a rope, a remote, and a carrying case.?Wirecam- 35mm ball-head allows angle adjustments to achieve your ideal shooting angle
- Two safety loop bolts are located on either end of the unit to prevent the wire from falling off of the wheel
- Six installed dampers absorb micro vibrations while the WireCam is functioning
- Graupner / SJ MZ-12HoTT 2.4GHz Controller prevents outside frequency interference using a duplex hopping technique
- 164' nylon climbing rope with a 6mm diameter and a tensile strength of up to 1772 pounds
HDMI Transceiver- up to 1080p60 resolution
- DTV and VESA video formats
- HDMI over wireless/Ethernet
- 500' at line of site
- Multicasting with up to three receivers using Wi-Fi
- Easy push-button operation
- No cables required
|
