Assured Gift with each Purchase
Assured Gift with each Purchase
637.06 د.إ
Excl. VAT
Key features
This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone’s shockmount or cable run.
Rode VideoMic GO Camera-Mount Shotgun Microphone
Longer than Rode’s VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.
This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
Easy Hookup to Camera
A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Runs on Plug-In Power
No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.
Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).
Windscreen Minimizes Wind Noise
The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).
Connectivity Options
Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396
Auray WSW-VMG Custom Windbuster for Rode VideoMic GO
The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.
This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.
When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone.
The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection.
Fits:
Rode VideoMic GO
| Settings | Rode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield remove | Rode NT-USB USB Microphone remove | Rode HS2 Lightweight Headset Microphone Pink/Large remove | Rode NT45-O Omnidirectional Replacement Capsule for Rode Microphones remove | Rode Broadcaster Voice-Over Microphone Kit remove | Rode NT-1 KIT 1" Cardioid Condenser Microphone with SM6 Shockmount remove |
|---|---|---|---|---|---|---|
| Name | Rode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield remove | Rode NT-USB USB Microphone remove | Rode HS2 Lightweight Headset Microphone Pink/Large remove | Rode NT45-O Omnidirectional Replacement Capsule for Rode Microphones remove | Rode Broadcaster Voice-Over Microphone Kit remove | Rode NT-1 KIT 1" Cardioid Condenser Microphone with SM6 Shockmount remove |
| Image | |  |  |  |  |  |
| SKU | AWP006274 | |||||
| Rating | ||||||
| Price | 637.06 د.إ Excl. VAT | Original price was: 868.32 د.إ.560.00 د.إCurrent price is: 560.00 د.إ. Excl. VAT | 1,536.26 د.إ Excl. VAT | 457.28 د.إ Excl. VAT | 2,568.95 د.إ Excl. VAT | 1,382.12 د.إ Excl. VAT |
| Stock |
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
Out of stock
|
| Availability | Out of stock | Out of stock | Out of stock | Out of stock | Out of stock | Out of stock |
| Add to cart | ||||||
| Description | Key features
| Key Features
| Key features
| Key features
| Key features
| Key features
|
| Content | This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone's shockmount or cable run. Rode VideoMic GO Camera-Mount Shotgun Microphone Longer than Rode's VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry. This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device. Shotgun Mic with Directional Sound Pickup Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders. Easy Hookup to Camera A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder. Runs on Plug-In Power No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries. Integrated Shockmount Inhibits Vibrations Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately). Windscreen Minimizes Wind Noise The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately). Connectivity Options Expand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396 Auray WSW-VMG Custom Windbuster for Rode VideoMic GO The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss. This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound. When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone. The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection. Fits: Rode VideoMic GO | The NT-USB USB Microphone from Rode is a cardioid, side-address USB microphone that is capable of capturing audio in up to 16-bit / 48 kHz resolution. It has an integrated headphone amplifier and 1/8" stereo headphone jack that allows for monitoring. The on-mic Direct Mix Control allows you to select between mic input and source input for monitoring. The NT-USB is compatible with the use of an optional camera kit. Included with the mic are a pop shield, a tripod desk stand, a ring mount, a 20-foot long USB cable, and a storage pouch. 3.5mm stereo headphone jack for zero-latency monitoring, Direct mix control between mic input and source output, Compatible with Apple iPad with optional camera kit, Cardioid polar pattern. | The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth. Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual. Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters. Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications. | The Rode NT45-O omnidirectional microphone capsule is found on the Rode NT4, NT5, NT6 and NT55 microphones. The removable capsule features an omnidirectional polar pattern for a generous pick up area at the front and off-axis sections of the microphone. This capsule replaces lost or damaged capsules. | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc. Rode Broadcaster Condenser Microphone The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use. It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded. The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter. O.C. White Podcast Pro by Accu-Lite Mic Boom Package Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go. Note:Microphone not included Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound. This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction. The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2". The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection. Fits these and other similar sized microphones: AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The NT-1 KIT 1" Cardioid Condenser Microphone from RODE includes the Rode NT1 cardioid condenser microphone, an SM6 premium shockmount with a detachable pop filter, and a microphone dust cover. The kit can be used to capture audio for vocalists and instruments in recording studio applications and more. While the body of the NT-1 still resembles the NT1-A, the mic has been completely redesigned except for the mesh grille. The large-diaphragm cardioid condenser microphone features RODE's updated HF6 capsule that is designed to provide a detailed midrange response with smooth highs and a warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an extremely quiet microphone. The body of the mic is machined from nickel-plated aluminum and is then coated in a ceramic layer, which is electrostatically applied for a scratch-resistant finish. Large 1" condenser capsule with gold-plated membrane, Cardioid polar pattern, Internal Rycote Lyre-based capsule shockmounting system, Ultralow-noise performance of only 4.5 dBA, State-of-the-art surface mount electronicsSM6 shockmount features a detachable pop filter, 10-year extended warranty when you register your microphone. |
| Weight | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Vinay KumarFriendly staff and a one stop store for all camera gears and accessories.Nkats RaynzThank you suleman bin Ali for your good service I will recommend all my friends to visit your store and meet you thanks again and you are the best. CheersRami SamourVery good company, deliver same day..aljon mallariAccommodating and easy transaction with them.Shehara RizlyOur Salesperson Basith made it a very pleasant experience as we wanted a good deal on a new video camera. He continued to help us get a good price on XA60 Canon video camera. The speedy response to all our queries and ensuring our experience was good, Abdulbasith really made us purchase more than just a camera but some accessories too.Mariam Alkaabiقبل امس طلبت المغرب و امس وصلت التوصيل سريييع ، انا البموظف طرشلي كل المعلومات الي احتاجهم وطرشلي لنك للدفع كلشي كان بسهوله!! مابطلتها بس حبيييييت الحجم والعرض كنت طالبه بلاكقراوند ما شاء الله🤩Eric BurgyVery good shop and good guys !Steven CheakAmazing professionalism. So impressedSaoirse ArtThank you for the great service.. i ordered twice already to AWPRO BR 1 , just the second order delivery was a bit late but it was okay, good thing im not in a hurry. Thanks to Mohamad Emad to make my order and delivery possible.. Keep up the Good work guys! Thank you Instagram : Saoirseart.portraits Thank you!OMEGA FILM MediaExcellent and speedy service, very good deal, special thanks to Emad for making everything smooth. Highly recommend.
