| Description | SmallRig Universal Top Handle for Cinematic Cameras MD2393Features
1.Multiple 1/4" and 3/8" thread wholes + Arri locating holes for anti twist.
2.Rock solid, lightweigt and compact.
3.Hex spanner tool integrated.This Top Handle allows different mounting options for cinematic cameras. It is ergonomically shaped for a comfortable shooting experience and also fast accessible hex spanner tool is integrate to the side. Furthermore the Arri Lock on the front of the handle offers the opportunity. To mount different types of monitors and also other additional gear closely to the camera.The grip is thread with 1/4" and 3/8" wholes. Its size fits perfectly for small and also mid size rig in order to keep the setup compact for. Run & Gun shootings. It also can be used while operating with steadycams and also gimbals.Designer: Simon AbeleCompatibility:
Universal | Key Features- Arca-Type Plate for SmallRig Cages
- Rubber Pads to Protect Cage
- Spring-Loaded Anti-Slip Pins
- Open Access to Camera Mounting Screw
| Key Features- Pair of 15mm Rods
- Lightweight Carbon Fiber Construction
This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 4" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. | Key Features:
1.Universal 15mm LWS Rod Mount Lens Support
2.6mm Horizontal Adjustment, 22mm Vertical Adjustment
3.One Piece Anti-off designed 1/4"-20 Threaded Support Rod
4.Includes Universal Y-Bracket
5.Allows to Quick Attachment/Detachment without Removing Other Rod-Mount AccessoriesSmallRig 15mm LWS Universal Lens Support 2152 is designed to remove the weight stress from camera's lens mount. It is compatible with any standard 15mm rods system and allows to adjust 6mm Horizontal and 22mm Vertical.The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support. The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories. It features a hole to for a hex spanner as a second secure point.Compatibility:
Universal | SmallRig 11 inch Articulating Arm 2066Key Features:- It is equipped with 1/4? ? screws on both ends respectively.
- It could attach monitor via the 1/4? ? screw on the one end and attach accessories with 1/4? ? -20 threaded holes on the other end.
- Mounted with 1/4? ? screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
- It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.
It is equipped with 1/4? ? screws on both ends respectively. Thus, it could attach monitor via the 1/4? ? screw on the one end and attach accessories with 1/4? ? -20 threaded holes on the other end, like cage, ?NATO Rail 1973, ?15mm Rod 1182 ?and ?Quick Release Rod Clamp 1976 ?etc.Mounted with 1/4? ? screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.Compatibility:
Universal | Key Features- Add 15mm Rod to BMPCC 6K and 4K Cages
- Single 15mm Rod Clamp
- Add Follow Focus Motor or Accessory
- Attach to Cage with Two 1/4"-20 Screws
Attach a 15mm rod to your cage for the Blackmagic Design Pocket Cinema Camera 6K and 4K to add a follow focus motor or other accessory using this ?Single 15mm Side Mount Rod Clamp ?from ?SmallRig. |
| Content | SmallRig Universal Top Handle for Cinematic Cameras MD2393Features- Multiple 1/4" and 3/8" threaded wholes + Arri locating holes for anti twist.
- Rock solid, lightweigt and compact.
- Hex spanner tool integrated.
This Top Handle allows different mounting options for cinematic cameras. It is ergonomically shape for a comfortable shooting experience and a fast accessible hex spanner tool is integrate to the side. Furthermore the Arri Lock on the front of the handle offers the opportunity to mount different types of monitors and other additional gear closely to the camera.The grip is threaded with 1/4" and 3/8" wholes. Its size fits perfectly for small and mid sized rig in order to keep the setup compact for Run & Gun shootings. It also can be used while operating with steady cams and gimbals.Designer: Simon AbeleCompatibility:
Universal | Add a quick release plate to your ? SmallRig Arca-Type Quick Release Plate ?camera cage with this ?Arca-Type Quick Release Plate. The lightweight aluminum plate attaches to the bottom of the cage with the two included 1/4"-20 screws and can fit in a standard Arca-type base.The Plate has an open-middle design so you can access the camera mounting screw through the plate. This design allows the plate to stay attached to the cage, and you can easily unmount the camera from the cage to move it to a gimbal, tripod, or other mounts. The Plate features rubber pads to protect the cage and it has spring-loaded anti-slip pins to prevent twisting.The plate is currently compatible with the following SmallRig cages. Check with the manufacturer for compatibility if you don't see your model below.Note:
This is not compatible with SmallRig baseplate 2035 or 1934.CompatibilityNikon
Z7/Z6 Cage 2243Sony
a7 III, a7R III Series Cages 2087, 2176
a6 Series Cages 1661, 2310, 2082
a7 II, a7R II, a7S II Series Cages 1982, 1660
a7, a7S, a7R Cage 1815
a9 Cage 2013SmallRig Arca-Type Quick Release Plate
RX0 Cage 2106
RX0 II Cage 2344
RX100 M5, M5A, M4, M3 Cage 2105
RX100 VI 2225Blackmagic Design
BMPCC 6K and 4K Cages 2203, 2254
BMPCC Cage 2012 SmallRig Arca-Type Quick Release PlateFujifilm
X-T2 Cage 1881
X-T3 Cage 2229
X-H1 Cage 2123, 2124Panasonic
GH5, GH5S Cage 2049
GH4 Cage 1585
GX85, GX80, GX7II Cage 1828 SmallRig Arca-Type Quick Release Plate
G85, G80 Cage 1950
S1, S1R Cage 2345Canon
EOS 70D, 80D Cage 1789
1DX, 1DX Mark II Cage 2365Olympus
EM1II Cage 2086GoPro
HERO 7, 6, 5 Cage 2320 | This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 4" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. | SmallRig 15mm LWS Universal Lens Support 2152Key Features:- Universal 15mm LWS Rod Mount Lens Support
- 6mm Horizontal Adjustment, also 22mm Vertical Adjustment
- One Piece Anti-off design 1/4"-20 Threaded Support Rod
- Includes Universal Y-Bracket
- Allows to Quick Attachment/Detachment without Removing Other Rod-Mount Accessories
SmallRig 15mm LWS Universal Lens Support 2152 is design to remove the weight stress from camera's lens mount. It is compatible with any standard 15mm rods system.And also allows to adjust 6mm Horizontal and also 22mm Vertical. The lens support is one piece anti-off design 1/4"-20 thread rod and also includes a Y-bracket support.The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories. It features a hole to for a hex spanner as a second secure point.Compatibility:
Universal | SmallRig 11 inch Articulating Arm 2066Key Features:
1.It is equipped with 1/4? ? screws on both ends respectively.
2.It could attach monitor via the 1/4? ? screw on the one end and attach accessories with 1/4? ? -20 threaded holes on the other end.
3.Mounted with 1/4? ? screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
4.It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.It is equipped with 1/4? ? screws on both ends respectively. Thus, it could attach monitor via the 1/4? ? screw on the one end and attach accessories with 1/4? ? -20 threaded holes on the other end, like cage, ?NATO Rail 1973, ?15mm Rod 1182 ?and ?Quick Release Rod Clamp 1976 ?etc.Mounted with 1/4? ? screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.Compatibility:
Universal | Attach a 15mm rod to your cage for the Blackmagic Design Pocket Cinema Camera 6K and 4K to add a follow focus motor or other accessory using this ?Single 15mm Side Mount Rod Clamp ?from ?SmallRig. It's compatible with the SmallRig 2203, CVB2254, and CVB2255 cages for Blackmagic Design Pocket Cinema Camera 6K and 4K.The aluminum clamp attaches to the cage using the two included 1/4"-20 screws. The rod clamp secures a separately available 15mm rod with a locking lever.Compatibility
Blackmagic Design Pocket Cinema Camera 6K/4K
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2203)
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2254)
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2255) |
