| Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The NT1000 1" Studio Condenser Microphone from Rode features transformerless circuitry, giving the mic an ultra-low self-noise level of 6 dBA. It can be used to capture audio for both vocal and instrument applications and is well-suited for grand piano and drum overheads. It is built with a 3-pin XLR connector and requires 24 or 48V phantom power to operate. Also included is a RM2 ring-mount microphone stand and a ZP1 padded zip pouch.
Cardioid Polar Pattern
The cardioid pick-up pattern is effective in minimizing noise from off-axis sections of the microphone such as monitors, instruments, room ambiance, etc.
Gold-Plated Diaphragm
The gold-plated diaphragm provides transparent signal reproduction and frequency response. The diaphragm is internally shockmounted, providing protection against potential damage.
Wide Frequency Response
The NT1000's 20 Hz to 20 kHz frequency response allows the microphone to be used in a variety of applications. | The Rode NT5 is a small diaphragm microphone featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage, monitors, additional instruments, etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum overhead miking, stereo capturing of instruments, vocal capturing, etc. The NT5 is powered via +24V or +48V phantom power. The package includes a windscreen, mic clip, and custom case.
Cardioid Pattern
The cardioid polar pattern is effective in minimizing off-axis noise due to leakage, additional instruments, room ambiance, etc.
Wide Frequency Response
The NT5 features a frequency response of 20 Hz to 20 kHz allowing the flexibility to capture accurately in any recording or sound reinforcement scenario. | The NT3 3/4" Cardioid Condenser Microphone from RODE features an end-address, 3/4", gold-sputtered, true-condenser transducer that provides detailed audio capture for almost any instrument. Intended for studio, stage, and location work, the NT3 can be used to capture audio on drums, percussion, acoustic guitar, guitar amps, piano, and all acoustic instruments. The versatile NT3 also works very well for voice reproduction when used as a handheld presentation microphone or indoor boom mic.This microphone can be powered by either phantom power, or via a 9V battery in situations when power isn't available through a console or camera. The NT3's rugged and durable all-metal body and mesh head ensure it is protected both in the studio, or out in the field. In addition, the NT3's cardioid pickup pattern effectively isolates the source signal, and the output circuitry and diaphragm are manufactured to further minimize noise from radio frequency interference or bad grounding.True-condenser externally biased 3/4" capsuleDual power operation? phantom or batteryCast-metal body with durable satin-nickel finishTransformerless outputInternal capsule shockmountingHigh level of RF rejectionAudio-grade surface-mount componentsFull frequency response10-year extended warranty when you register your microphone with RODE. | The NT1-A Large-Diaphragm Condenser Microphone from RODE is a 1" cardioid condenser microphone. It has a self-noise level of 5 dB-A, making it a great choice for a vocal microphone, as well as for recording guitars and percussion instruments.A studio-grade pop shield and shockmount is included, along with a 20' microphone cable, dust cover, and an instructional DVD with recording tips.
Large Diaphragm
The 1" diaphragm provides a wide frequency response and excellent signal-to-noise ratio
Cardioid Polar Pattern
The cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambiance, monitors, and off-axis instruments
Transformerless Output
The transformerless output electronics result in quiet, noise-free output while maintaining maximum signal gain
48V Phantom Power
The microphone uses standard 48V phantom power, which is supplied through the standard XLR connector
Accessory Package
The accessory package includes a studio-grade shock mount with an integrated pop filter, a premium 20' cable, a dust cover, and a bonus DVD with microphone tips and techniques. | The NT2-A Studio Solution Package from RODE includes the NT2-A multi-pattern condenser microphone, the SM6 shock mount and pop filter, a 10' XLR cable, and a dust cover. Also included in this package is an instructional DVD with an in-depth tutorial by Grammy nominated producer John Merchant.The Rode NT2-A has a high-quality, large dual-diaphragm multi-pattern condenser element that delivers maximum flexibility in many recording scenarios. Superior electronics result in ultra-low noise performance, and its fixed variable pad, pattern and filter adjustments provide the flexibility and control needed by musicians and recording engineers alike.The Rode NT2-A Studio Solution Package includes the SM6 shockmount, XLR cable, dust cover and instructional DVD by Grammy Award nominated producer John MerchantLarge 1" (25mm) HF1 gold sputtered capsule, On body control of polar pattern, HPF and PAD, Three position variable polar pattern - Omni, Cardioid or Figure 8 Three position variable High-Pass Filter - Flat,
40Hz or 80Hz, Three position PAD - 0dB, -5dB or -10dB, Ultra low noise, transformerless surface mount circuitry, Includes SM6 shock mount with integrated pop filter,
3m XLR cable, dustcover and exclusive training DVD.Internal capsule shock mounting. Designed and manufactured in Australia. |
