| Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.Live condenser vocal microphone
Feedback rejecting supercardioid pick up pattern
Locking on/off switch
Heavy duty metal body
High level of RF rejection
Low handling noise
Designed and manufactured in Australia
Ten year warranty. | Each of this matched pair of M5 Compact 1/2" Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response. This permanently polarized condenser mic can be used in several environments including stage, theater, studio, and home applications. It is well-suited for instruments, choirs, or anywhere you would employ a small-diaphragm condenser microphone.The matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones. The M5 is finished with Rode's ceramic coating, which offers a sleek matte-black finish. WS5 windshields and RM5 stand mounts are included.This matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones, Ceramic coating with matte-black finish1/2" capsule with gold-plated membrane, Cardioid polar pattern, All-metal body, Ultra-low noise. | The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragmOn-Air indicator LEDLow noiseVoice-tailored low-cut featureInternal pop filter. | The NT1000 1" Studio Condenser Microphone from Rode features transformerless circuitry, giving the mic an ultra-low self-noise level of 6 dBA. It can be used to capture audio for both vocal and instrument applications and is well-suited for grand piano and drum overheads. It is built with a 3-pin XLR connector and requires 24 or 48V phantom power to operate. Also included is a RM2 ring-mount microphone stand and a ZP1 padded zip pouch.
Cardioid Polar Pattern
The cardioid pick-up pattern is effective in minimizing noise from off-axis sections of the microphone such as monitors, instruments, room ambiance, etc.
Gold-Plated Diaphragm
The gold-plated diaphragm provides transparent signal reproduction and frequency response. The diaphragm is internally shockmounted, providing protection against potential damage.
Wide Frequency Response
The NT1000's 20 Hz to 20 kHz frequency response allows the microphone to be used in a variety of applications. | The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 0.5" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.
Battery or Phantom-Powered Condenser
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
Cardioid Polar Pattern
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
-10 dB and -20 dB Pad Switch
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
High-Pass Filter
A high-pass filter switch eliminates noise and hum at the lower frequency range. |
