| Content | The GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33" end to end and provides 31" of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.While the slider's ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.A plate on the bottom provides 1/4"-20 and 3/8"-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.Key Features- 31" of travel distance
- 11 lb load capacity
- 1/4"-20 camera screw and also 3/8"-16 bushing
- Independently adjustable feet
- Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
- 1/4"-20 and 3/8"-16 tripod mount threads
UPC: 738629502369 | The GVM GT-120WD Wireless Carbon Fiber Motorized Camera Slider (47") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app.The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 47" of slider travel. The slider carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 11 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot swap for uninterrupted use.The GVM GT-120WD Wireless Carbon Fiber two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The GVM GT-120WD Wireless Carbon Fiber controller features its own internal battery. And also an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength, and also info on your move.The remote controller allows you to set keyframes and control the duration of the move. You can use the remote to control the slider in manual video mode, as well as in auto mode for video. Auto loop, time-lapse, and also panoramic stills shootingUPC: 675663007170 | The 32" ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel.The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:- DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
- N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
- S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
- L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
- DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the moveRemote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting- The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation | The JJ-G310 Tabletop Mini Tripod from GVM is ideal for cell phone photography and features flexible legs for shooting on uneven surfaces. It features an adjustable clip design for holding smart phones between 2.25 to 3.75" wide, and a standard 1/4"-20 screw mount is provided for mirrorless and smaller-sized digital cameras.This GVM JJ-G310 Tabletop Mini Tripod helps eliminate blurry and shaky results when shooting photos or video, and the legs adjust to any height up to 12.2". The bendable legs have a textured surface that can wrap around a fence, pipe, post, tree limb, or anywhere else you can think to place your device.And if you hold the legs together, you can use the JJ-G310 as a camera grip handle. A built-in ball head lets you swivel, tilt, and change orientation for exciting and dramatic angles.UPC: 717351605425 | GVM has put together this 672S Bi-Color LED Video 2-Light Kit for image makers who require a complete system with color and power options. The kit includes two green 672S Bi-Color LED Panels with 4-way barndoors, AC power adapters, and soft filters.The 13.4 x 12.7 x 3" 672S Bi-Color LED Panel is a compact light source with a color range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression. The light's high CRI/TLCI rating of 97 is an indicator of accuracy in rendering color.The GVM-672S has a wide beam spread that can be controlled with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The light is dimmable too, and while you can make adjustments locally on the fixture. You can also make them with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control. Or also with the included wireless remote control.The GVM 672S Bi-Color LED Video 2-Light Kit runs on 110-220 VAC for worldwide use via the included AC adapter. But it will also run on NP-F-type batteries when mains power is unavailable. The light comes with two diffusion filters to soften the bright LEDs. | The GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 31" of slider travel.The GVM GT-80WD Wireless Carbon Fiber carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single GVM GT-80WD Wireless Carbon Fiber, allowing you to hot swap for uninterrupted use.The two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The wireless controller features its own internal battery and also an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move.The remote controller allows you to set keyframes and also control the duration of the move. You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and also panoramic stills shooting- The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest
|
