| Description | - 2000 to 5600K Variable Color Dial
- 10 to 100% Dimming
- Bicolor & Adjustable Color Modes
- Smartphone App Wi-Fi Control
| - 3200 to 5600K Color Temperature Output
- Dimming from 100 to 10% Brightness
- Discrete Color Temp and Dimming Knobs
- Integrated Li-Ion Batteries
| - 2 x GVM-672S LED Panels
- 2 x Bracket Soft Filters
- 2 x Soft Filters
- Built-In Wireless Control
| - Wireless Programmable Motorized Slider
- Robust 31" Portable Travel Slider
- Carbon Fiber Rails
- Supports up to 5.5 Pounds
| Key Features- 30" Quiet Motorized Sliding Range
- Supports Cameras up to 11 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. | - Ball Bearing Slider with 11 lb Payload
- Stainless Steel Dampening Flywheel
- 1/4"-20 Camera Screw and 3/8"-16 Bushing
- 1/4"-20 and 3/8"-16 Tripod Mount Threads
|
| Content | The 7S RGB LED On-Camera Light from GVM is a compact aluminum LED light featuring a 2000 to 5600K adjustable color temperature, iOS and Android smartphone app control via Wi-Fi, both bicolor and RGB modes, and a runtime of up to four hours.The GVM 7S RGB LED On-Camera Video Light comes with a 180 ? tilt shoe mount and has an easy-to-grip ribbed finish on the back. Two dials enable you to adjust the light's intensity and color temperature separately, and a magnetic diffusion filter is included for softening the light's output. When fully charged, the GVM-7S On-Camera Light lasts for up to four hours and can be used while being charged.Key Features- Slim, lightweight aluminum design
- Smartphone app control via Wi-Fi
- 80 surface-mount SMD LEDs
- Adjustable 2000 to 5600 RGB color mode plus a bicolor mode
- 10 to 100% dimming
- 97+ CRI
- Magnetic diffuser panel
- Includes tilting shoe mount adapter
- Built-in rechargeable battery
- Up to 4-hour runtime
| The GVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit is a lightweight yet durable LED light fixture suitable for use on a camera or also light stand. This fixture features variable color temperature output from 3200 to 5600K, dimming from 100 to 10% brightness, and also a 45 ? beam angle.Two discrete knobs, one for color temperature and also one for dimming. Allow you to independently adjust both parameters.The GVM 5S Professional Video Variable On-CameraFixture is passively cooled. With the aluminum backplate featuring raised fins to aid in the cooling. On the front of the fixture are magnetic attachment points for the included diffusion filter. Allowing you to easily attach or also remove it from the light.On the bottom of the light is a 1/4"-20 threaded mounting hole. For attaching to articulating arms, light stands, or also the included cold shoe adapter. The integrated battery will run the light for up to four hours on a single charge.The GVM 5S Professional Video Variable On-Camera included cold shoe adapter features 180. ? of articulation. Pressing the on/off/mode button for five seconds also allows you to change the color mode | GVM has put together this 672S Bi-Color LED Video 2-Light Kit for image makers who require a complete system with color and power options. The kit includes two green 672S Bi-Color LED Panels with 4-way barndoors, AC power adapters, and soft filters.The 13.4 x 12.7 x 3" 672S Bi-Color LED Panel is a compact light source with a color range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression. The light's high CRI/TLCI rating of 97 is an indicator of accuracy in rendering color.The GVM-672S has a wide beam spread that can be controlled with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The light is dimmable too, and while you can make adjustments locally on the fixture. You can also make them with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control. Or also with the included wireless remote control.The GVM 672S Bi-Color LED Video 2-Light Kit runs on 110-220 VAC for worldwide use via the included AC adapter. But it will also run on NP-F-type batteries when mains power is unavailable. The light comes with two diffusion filters to soften the bright LEDs. | The GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 31" of slider travel.The GVM GT-80WD Wireless Carbon Fiber carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single GVM GT-80WD Wireless Carbon Fiber, allowing you to hot swap for uninterrupted use.The two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The wireless controller features its own internal battery and also an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move.The remote controller allows you to set keyframes and also control the duration of the move. You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and also panoramic stills shooting- The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest
| The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GP-80QD Professional Video Carbon Fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours.GVM GP-80QD Professional Video Carbon Fiber An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30 ? incline.Programmable Modes- Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
- Video capture: Suitable for interviews as the motor is silent.
- Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the GVM GP-80QD Professional Video Carbon Fiber as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide.You can also set it so the camera shoots in a parabola to keep the subject centered during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and also others. | The GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33" end to end and provides 31" of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.While the slider's ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.A plate on the bottom provides 1/4"-20 and 3/8"-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.Key Features- 31" of travel distance
- 11 lb load capacity
- 1/4"-20 camera screw and also 3/8"-16 bushing
- Independently adjustable feet
- Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
- 1/4"-20 and 3/8"-16 tripod mount threads
UPC: 738629502369 |
