| Description | - Measures 13.4 x 12.7 x 3"
- Variable Color Temperature: 3200-5600K
- CRI/TLCI: 97
- 4-Way Barndoors
| - Ball Bearing Slider with 11 lb Payload
- Stainless Steel Dampening Flywheel
- 1/4"-20 Camera Screw and 3/8"-16 Bushing
- 1/4"-20 and 3/8"-16 Tripod Mount Threads
| Key Features- 30" Quiet Motorized Sliding Range
- Supports Cameras up to 11 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. | - Lithium-Ion V-Mount Battery
- Battery Charger
- 6600mAh, 95Wh, Charge Time: 4 Hours
- Suitable for Video Cameras & LED Lights
| - Color Temperature: 3200-5600K, CRI97
- 120 ? Beam Spread, Measures 16.5"
- Dimmable, AC Adapter
- NP-F750 Battey and Charger
| - Portable Multi-Function Tripod
- Load Capacity: 6.6 lb
- Universal Mobile Phone Clip
- Three-Section Carbon Fiber Legs
|
| Content | The 13.4 x 12.7 x 3" GVM-672S Bi-Color LED Video Light Panel from GVM is a compact light source with a color range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression. The light's high CRI/TLCI rating of 97 is an indicator of accuracy in rendering color.The GVM-672S has a wide beam spread that can be controlled with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The light is dimmable too, and while you can make adjustments locally on the fixture. You can also make them with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control.The GVM-672S runs on 110-220 VAC for worldwide use via the included AC adapter, but it will also run on NP-F-type batteries when mains power is unavailable. The light comes with a diffusion filter to soften the bright LEDs. As well as a large carry bag for storage and transport.UPC: 738629502413 | The GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33" end to end and provides 31" of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.While the slider's ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.A plate on the bottom provides 1/4"-20 and 3/8"-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.Key Features- 31" of travel distance
- 11 lb load capacity
- 1/4"-20 camera screw and also 3/8"-16 bushing
- Independently adjustable feet
- Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
- 1/4"-20 and 3/8"-16 tripod mount threads
UPC: 738629502369 | The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GP-80QD Professional Video Carbon Fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours.GVM GP-80QD Professional Video Carbon Fiber An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30 ? incline.Programmable Modes- Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
- Video capture: Suitable for interviews as the motor is silent.
- Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the GVM GP-80QD Professional Video Carbon Fiber as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide.You can also set it so the camera shoots in a parabola to keep the subject centered during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and also others. | Suitable for video cameras and LED lights, the GV-95 Battery with D-Tap and DC Outputs from GVM is a 6600mAh, 95Wh lithium-ion V-mount power source with a 4-level charge-status indicator and D-Tap and DC outputs, both of which can be used as a charging or discharging port. The battery charges to full power in approximately 4 hours with the included charger.Unlock unlimited creative potential with the GVM GV-95 Battery. Engineered for versatility, this power-packed battery features D-Tap and DC outputs, ensuring compatibility with a wide range of professional video equipment. With reliable and efficient energy delivery, you can trust the GV-95 to keep your gear running smoothly during intense shoots.Whether you're capturing cinematic moments or covering live events, this battery provides the endurance you need. Invest in the GVM GV-95 Battery with D-Tap and DC Outputs for a seamless power solution, empowering your filmmaking journey with confidence. Don't settle for limitations – embrace the freedom to capture your vision with GVM's cutting-edge technology.UPC: 738629502338 | The 16.5" GVM 12D Light Stick LED Wand lives up to its "Wand" name as it is a serious light source and fun to handhold for spontaneous effects as well. The light's 120 ? beam spread also makes it a natural for use as a side light, accent light, or hair light.The Stick's GVM 12D Light Stick LED Wands have color that's variable from 3200 to 5600K to meet ambient conditions, match other fixtures, or just for creative effects. Its high CRI of 97 is an indicator of precision in color rendering. Light intensity is conveniently variable too.And there's a downloadable app that allows wireless control of the Light Stick with a smartphone. The Light Stick LED Wand comes with an AC adapter but you can also run it on the included NP-F750 li-ion battery for total freedom of movement. | The JJ-G265 Carbon Fiber Mini Tabletop Tripod from GVM is a portable multi-function tripod with a folded length of 10.4" and a 6.6 lb load capacity. Perfect for travel, this tripod features a dual-action ball head with an independent pan lock that enables you to rotate the head 360 ?, and a ball lock lets you vertically position your camera at a 90 ? angle.The GVM JJ-G265 Carbon Fiber Mini Tabletop Tripod includes a cell-phone clip for accepting phones up to 3.3" wide, and a WD1 Magic Hand is also included, which provides a multi-function arm with 1/4"-20 interfaces at both ends. Three-section carbon fiber legs with twist locks extend the tripod to a height of 15.5".And the included telescoping pole increases the maximum working height of the tripod to 28.3". Removable rubber feet are provided for working on smooth surfaces, and these removable feet enable you to use the included spiked feet when shooting outdoors and on uneven terrain.UPC: 717351605432 |
