| Description | - Very compact while folded for increased portability
- The base with fluid cartridge gives you a smooth pan action
- The fluid cartridge can be detached to make a mini tripod
| - Supports up to 22 Pounds
- 75mm Ball/Bowl
- 3-Section Legs with Mono-Lock Design
- Height Range 32.5 to 68"
The ?E-Image EG10A2L 2-Stage Aluminum Tripod with GH10 Head ?supports cameras and accessories weighing up to 22 pounds. The head and legs feature a 75mm ball/bowl, which provides a wide support platform. The legs are made from aluminum to be durable | - Dual 75/100mm Bowl
- For Select E-Image Tripod Heads
- Aluminum Alloy Construction
- Load Capacity of 110 lb
- Weighs 7 lb
- Height Range 15" to 28"
- Dual Spiked Feet
| - App control, the max. distance can reach 10 meters
- Provides time lapse shooting, exposure can be controlled
- Trace records, the max. can reach 9pcs
- Provides stop-motion shooting
- Low-noise working, decreasing the interface of motor movement
- It also could be used on other sliders with optional adapters
| - Fits E-Image Tripods with Dual Spikes
- 132 lb Load Capacity
- Non-Marring 4" Rubber Wheels
- Individual Wheel Brakes
The ?E-Image Tripod Dolly ?from ?ikan ?is designed for use with all E-Image tripod legs that feature dual spiked feet. It supports up to 132 pounds and is ideal for moving tripods along a flat surface for quick re-positioning between shots. It is not recommended for use as a | - Load Capacity: 13.6 lb
- Max Height: 78.3"
- Closed Length: 28.7"
- Sections: 4
The ?MA-90 ?from ?E-Image ?is a 4-section monopod designed for both photo and video use. It utilizes easy-to-use flip locks for rapid set-up and break-down and features a 3-foot fluid base for smooth, uninterrupted pans and tilts. |
| Content |
E-IMAGE Monopod - MC110 very portable solution for smooth shooting with DSLR. Mini-DV, and HDV Cameras while in limited spacesThe new E-Image monopod series is a portable solution for smooth shooting with DSLR. Mini-DV and HDV cameras in limited spaces. It is perfectly use for on the move shooting and is smoother and easier than a handled camcorder.This creatively design monopod incorporates a fluid cartridge in the base for smooth pans and has three retractable feet for a firm footing on uneven ground. Photographers are able to stand as they were using a tripod but have the movement and freedom that comes with a monopod.Key Features:- Very compact while folded for increased portability
- The base with fluid cartridge gives you a smooth pan action
- The fluid cartridge can detached to make a mini tripod
| E-Image EG10A2L 2-Stage Aluminum Tripod with GH10 Head
The E-Image EG10A2L 2-Stage Aluminum Tripod with GH10 Head supports cameras and accessories weighing up to 22 pounds. The head and legs feature a 75mm ball/bowl, which provides a wide support platform. The legs are made from aluminum to be durable and lightweight, and they feature three leg sections with mono-lock leg locks.The mono-lock design allows you to lock and unlock all the sections of each leg using only one rotating locking lever. The tripod legs are height-adjustable from 32.5 to 68". The legs include a mid-level spreader and rubber feet that attach to the spiked feet.The GH10 head features a sliding balance plate system for attaching the camera to the head. It provides seven counter balance settings (one to seven) that help the fluid head support loads up to 22 pounds. With three fluid drag grades plus a zero setting on both pan and tilt.You can adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built in 1/4"-20 accessory socket for available monitor support arms or other accessory items. It includes a padded carry bag with shoulder strapFeatures- Mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked.
- The single lever on each leg allows you to quickly lock the leg height without having to use two levers. Making for a quicker workflow and also sparing you from having to bend down to open a bottom leg lock to raise the legs.
- The legs feature spiked feet that provide solid purchase on soft surfaces. The included mid-level spreader allows you to use the legs on uneven surfaces. And also the rubber feet allow you to shoot on hard/delicate surfaces.
- The head incorporates a push button that illuminates the built-in bubble level. An LR41 push-button battery is included and is easily replaceable.
| E-Image Mini Tripod EI-7501
The E-Image Short/Baby Tripod Legs with Combination 75/100 mm Bowl ?is an aluminum alloy tripod that incorporates a dual 75/100mm bowl accepting select 75/100mm E-Image fluid heads. You can also mount fluid heads from other manufacturer's that fit a 75/100mm half ball.However the shape of the half ball varies from manufacturer to manufacturer, so it is important to check for compatibility when using a head other than the GH03, GH06, GH08, GH10, GH15, or GH25.The legs support up to 110 pounds yet weigh only 7 pounds and are adjustable from 15" to 28". Each leg incorporates dual spiked feet for use on soft surfaces, and an included ground level spreader attaches to the tripod legs for use on hard surfaces.Each leg is individually adjustable, so you can compensate for uneven surfaces such as steps or rocky terrain. The included padded carry bag provides a good solution for storage and transport.These aluminum alloy baby legs have a load capacity of 110 lb.E-Image Mini Tripod EI-7501
The legs feature a dual-sized bowl that accepts both 75 and 100mm ball bases. The legs are designed to work with available E-Image GH03, GH06, GH08, GH10, GH15, or GH25 fluid heads but may work with other fluid heads with either a 75mm or 100mm ball base.The two section, single stage legs are equipped with rotating lever locks for a secure nonslip height adjustment.The legs feature a removable ground spreader and dual spiked feet for grip on soft or uneven surfaces when you wouldn't normally use the spreader, such as earth, sand, or rocky terrain.The dual spikes provide grip when shooting with the legs spread wide for low angle shots or with the legs in a more standard spread. The spreader is useful on hard surfaces, such as streets, sidewalks, and interior floors.The spreader is expandable for increased stability and allows the legs to spread wide for low angle shots. | The E-Image Track Dolly Motor3 are ideal designed for professional filmmakers and photographers to take dynamic videos. It provides trace-record, time-lapse, stop-motion functions, and also all of them are controlled by APP. Which is very easy and also convenient to operate it. It features precise and extremely stable movement because of the inner special motor.With E-Image Track Dolly Motor3 compact and innovative structure. It is light-weight and easy to set up in 5 minutes without any tool. Our motor also could match with other sliders. Such as Ifootage, Varavon, Konava, what need to do is just change the adapter plate. It is almost universal.- Stop-Motion: Set frame and exposure time - check leakage and fill a vacancy if any picture is missing. Positioned at requested location automatically, if re-shooting
- App control: Get started quickly for everyone - easy and convenient to adjust configuration parameters.
- Trace record: Create incredible images - AB records and complicated trace records (max. 5 routes). The system saves traces and shows traces at your request.
- Step less Variable Speed: Digital adjustment for each speed & direction - Maximum acceleration speed. could be adjusted, provides outstanding ease in and ease out function, pictures look natural. Also solves problem that each typed needs to re-cut.
- Motion control: Complicated trace record Motion Control System - take videos in virtual studio or environments according to your trace, not only AB, but also complicated trace
| The E-Image Tripod Dolly from ikan is designed for use with all E-Image tripod legs that feature dual spiked feet. It supports up to 132 pounds and is ideal for moving tripods along a flat surface for quick re-positioning between shots. It is not recommended for use as a dolly for dolly shots. Instead, it is designed to help you move heavy tripods from one camera position to the next.This tripod dolly features 4"-diameter, non-marring rubber wheels with individual brakes, and a 37" working base diameter. Once removed from your tripod legs, it folds for storage or transport.- Supports up to 132 pounds of tripod, camera, and accessories.
- The 4" rubber wheels are non-marring during normal use, protecting the floor surface.
- Each wheel incorporates its own foot-activated brake.
| The MA-90 from E-Image is a 4-section monopod design for both photo and video use. It utilizes easy-to-use flip locks for rapid set-up and break-down and features a 3-foot fluid base for smooth, uninterrupted pans and tilts.Capable of reaching a maximum height of 78.3" and folding down to just 28.7", the MA-90 is both versatile and portable. It can support up to a maximum of 13.6 lb more than enough for most DSLR's and many camcorders.While weighing just 3.2 lb, making it easy to transport in the field or to the studio. The top section features a padded grip for user comfort and a wrist strap for additional safety.The monopod's base consists of 3 retractable feet. Which provide a stable and also non-slip shooting surface for the monopod in nearly any environment.The top of the base is equip with a ball joint attached to a fluid cartridge. Which provides the user with smooth dampened pans and also soft tilts. The underside of the base features an adjustment knob capable of adjusting. The amount of dampening resistance to meet the user's needs. |
