| Description | >Model: TERANEX2D422- Standards/Format Converter & I/O Device
- Simultaneously Converts and Captures
- Up/Down/Cross Format Conversions
- Aspect Ratio Conversion
The ?Blackmagic-Design Teranex 2D Processor ?is an advanced-quality standards converter as well as video format converter and capture and playback device all-in-one. As a standards converter, it can convert from most any television format to any other television | >Model: MultiView 16- 16x 6G-SDI Inputs with Loop Outputs
- 4x SDI & 1x HDMI MultiView Outputs
- Supports SD, HD, Ultra HD 4K, DCI 4K
- 2x2, 3x3, 4x4 Multi-View Configurations
The ?Blackmagic Design MultiView 16 ?features sixteen 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of the high resolution displays to view each source with | Model: HYPERD/ST/12G- Records Up to 3840 x 2160 at 60 fps
- Plays Back Up to 3840 x 2160 at 60 fps
- 12G-SDI and HDMI 2.0 Inputs
- 1 HDMI and 4 12G-SDI Outputs
UHD 4K playback and recording at up to 60p is introduced with the ?Blackmagic Design HyperDeck Studio 12G. This file-based deck provides the familiar jog/shuttle interface of traditional VTRs, but instead of tape use SSD drives for recording media. It records in | >Model: CONVMBHS24K6G- 4K HDMI Input
- 2 x 6G-SDI Outputs
- Supports SD, HD, UHD 4K & DCI 4K Signals
- Automatic Input Signal Detection
The Blackmagic Design HDMI to SDI 6G Mini Converter converts HDMI to SD, HD, 3G, or 6G-SDI in resolutions up to DCI 4K (4096 x 2160) at 24p and UHD 4K (3840 x 2160) up to 30p. This is useful for connecting consumer devices that output HDMI signals with | >Model: MultiView 4- 4x 6G-SDI Inputs with Loop Outputs
- 1x SDI & 1x HDMI MultiView Outputs
- Supports SD, HD, UHD 4K, DCI 4K
- Independent Inputs Allow Mixing Formats
The ?Blackmagic Design MultiView 4 ?features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with | Model: HYPERD/ST2- 1RU File-Based Video Recorder
- Records Uncompressed 10-bit 4:2:2
- Records Compressed in ProRes / DNxHD
- Records on Two 2.5" SSDs
The ?Blackmagic Design HyperDeck Studio 2 ?is a file-based deck that features the same functionality and control of professional tape decks. It records uncompressed video with 4:2:2 color sampling at 10-bit in Quicktime format, and also records video using either |
| Content | >Model: TERANEX2D422The ?Blackmagic-Design Teranex 2D Processor ?is an advanced-quality standards converter as well as video format converter and capture and playback device all-in-one. As a standards converter, it can convert from most any television format to any other television format in the highest quality. Conversions are indistinguishable from the original master. And as for capture/playback functionality, the Teranex can simultaneously convert formats and -- via Thunderbolt -- capture files into a computer for editing.What makes Teranex so good is an advanced SIMD technology--developed and patented by Teranex--that allows instant calculations on thousands of pixels simultaneously in X, Y positions and between video frames. Processing is applied within the frame and between frames all at the same time, delivering better de-interlacing, inter-frame interpolation and noise reduction.Overall, the processor features extremely high-quality de-interlacing, up and down conversion, SD and HD cross conversion, SD and HD standards conversion, automatic cadence detection and removal (even with edited content), noise reduction, adjustable scaling, aspect ratio conversion, and timecode conversion; and accompanying all the video conversion functionality is 16 channel audio conversion capacity.Standards conversions can actually also be employed for reasons other than the general need to convert. Conversions can be performed simply to protect equipment such as decks, switchers, transmitters and encoders from standards they don't support. And as far as non-general uses go, the Teranex can additionally be used to synchronize and convert video feeds.A bunch of software comes included. Two of them are Media Express and UltraScope. UltraScope lets you measure your video signal levels with a Thunderbolt-connected computer, displaying 6 simultaneous live scopes on a single screen. The addition of these two applications to your NLE give you a complete editing toolset to complement an all-in-one conversion/capture device.High Quality De-InterlaceTeranex quality starts with one of the world's highest quality and most precise de-interlacers. Teranex features proprietary and patented PixelMotion de-interlacing algorithms so you get improved image quality by maintaining vertical resolution.Up ConversionWhen converting from NTSC or PAL SD up to 720HD or 1080HD, Teranex is perfect because it features a wide range of aspect ratio options and multi-direction diagonal filters so "jaggies" are eliminated and you get clean HD looking images.Down ConversionTeranex down conversion allows amazing SD feeds from your HD sources. 1080HD and 720HD video sources, combined with the de-interlace, and multi-direction diagonal filters, give you great SD images with a range of aspect choices.SD/HD Cross ConversionOften work is completed in the native film frame rate of 23.98 or 24 fps and then broadcast in 25 or 29.97 fps. Teranex converts between frame rates such as these, adding and removing cadence as required. Move between video and film worlds with ease.SD/HD Standards ConversionLinear standards conversion is easy with the powerful SIMD processor which can analyze and calculate pixels between frames as easily as anywhere in the frame.Cadence Detect and RemoveTeranex is unique because it can automatically remove cadence (3:2 pulldown) from video when converting 24 fps, even when the footage has been previously edited and suffers from flash fields. That's perfect for mastering clean online content.Noise ReductionRemove unwanted noise from transmission links, videotape, or even camera sources. Teranex includes award winning temporal recursive noise reduction. Reducing noise allows more efficient video compression when authoring content.Adjustable ScalingTeranex includes fully adjustable scaling. Use adjustable scaling when you need to set custom aspect ratios, or even for reframing shots to remove image edge artifacts.Aspect Ratio ConversionTeranex supports a wide range of aspect ratios, including variable and fixed aspect ratios as well as active fill. Also included is the proprietary Smart aspect that warps images from 4:3 to 16:9 without visible stretching of the image that normally occurs.Audio, Timecode and SubtitlesVideo includes a lot more than images, and Teranex also supports conversion of up to 16 audio channels plus timecode and closed caption VANC data. This means timecode matches during conversion to the 0 frames, and subtitles are retained.Convert and CaptureTeranex processors include a super fast 10 Gbps Thunderbolt port so you can connect it to your computer for capture and playback of video and audio. Simply plugging in a Thunderbolt cable transforms Teranex into a high end capture and playback solution with full software and SDK support. This means you get compatibility with editing software including Final Cut Pro, Media Composer and Premiere Pro. Plus support for After Effects, Photoshop, Nuke, ProTools, as well as the included Media Express and UltraScope software from Blackmagic Design.Edit with Final Cut Pro XNow you can easily incorporate archive SD material into HD projects and distribute projects in different resolutions and formats. It's common to work with mixed video formats in a single project and using a Teranex Processor this has never been easier. Teranex's high performance real time conversion combined with Thunderbolt technology delivers the perfect capture and playback solution. You can convert and capture any video format for editing with Final Cut Pro and more. Plus with Blackmagic Media Express and UltraScope software you have the complete editing toolset.Blackmagic UltraScopeBlackmagic UltraScope is included with Teranex Processors so you can measure your video signal levels with a Thunderbolt connected computer. UltraScope displays 6 simultaneous live scopes on a single screen. You get Parade, Waveform, Vectorscope and Histogram, plus audio metering and a picture view with timecode. UltraScope provides technically accurate waveform monitoring that's perfect for mastering, editing and in any location where you use Teranex processing.Mandated by BroadcastersTeranex processing is so well known for quality that it has been mandated by major studios and many US broadcast networks for all master conversions when distributing content for worldwide delivery.Free Software Downloads Offered- Media Express
- Disk Speed Test
- LiveKey
- Blackmagic System Preferences
- Blackmagic Driver for video capture / playback via Thunderbolt
- Blackmagic UltraScope for Waveform monitoring via Thunderbolt
- Software Control Utility for canging settings via Windows 7 and Mac OS X
| >Model: MultiView 16The ?Blackmagic Design MultiView 16 ?features sixteen 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of the high resolution displays to view each source with increased clarity. The MultiView 16 allows for 4, 9, or 19 views to be selected, with each input fully re-synchronized. Two HD-SDI, two 6G-SDI, and one HDMI multi-view outputs are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.Housed in a 1RU machined aluminum frame, the MultiView 16 is ready for use in the studio, broadcast truck, or even on location. It can be controlled using the illuminated buttons, spin knob, and 1.5" LCD screen on the front panel, or with the included control software via the Ethernet port. A SOLO button lets instantly full screen a single source. For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240VAC.Note: ?IEC power cable is not included.- Native Ultra HD multi-view output
- 16x 6G-SDI inputs; accepts SD, HD, and Ultra HD resolutions
- Supports Ultra HD 4K (3840x2160) up to 30p; DCI 4K (4096x2160) at 24p
- 2x 6G-SDI, 2x HD-SDI, and 1x HDMI multi-view outputs
- 16x SDI loop outputs
- 2x2, 3x3, and 4x4 multi-view configurations
- SOLO button for instant full screen of single source
- 2-channel audio meters for each view
- 16x9 SD support
- Tally support with ATEM switchers
- 1RU machined aluminum chassis
- Front panel control using illuminated buttons, spin knob, and 1.5" LCD screen
- Software control over Ethernet; supports Videohub router protocol
- Built-in 90 to 240VAC power supply
- IEC power cable required
| Model: HYPERD/ST/12GUHD 4K playback and recording at up to 60p is introduced with the ?Blackmagic Design HyperDeck Studio 12G. This file-based deck provides the familiar jog/shuttle interface of traditional VTRs, but instead of tape use SSD drives for recording media. It records in uncompressed QuickTime, ProRes, or Avid DNxHD formats all with up to 4:2:2 color sampling at 10-bit color space. With two SSD slots, you can record almost endlessly - as one SSD becomes full, recording automatically continues on to the other. The Studio 12G features one 12G-SDI input that is 3G-, HD-, and SD-SDI compatible along with one HDMI 2.0 input. In addition, there are four total SDI outputs and one HDMI 2.0 output for monitoring and connection to other equipment in your studio. All of the SDI connectors plus both of the HDMI ports support UHD 4K (3840 x 2160) at up to 60 fps.The Studio 12G is housed in a 1RU rackmountable unit, with built-in rackmount ears. It features illuminated front panel button control and a jog/shuttle wheel for analog scrubbing. RS-422 control is supported for external control. You can also control the unit using either the USB port or over Ethernet via the RJ-45 connector. An integrated LCD on the front panel allows you to monitor the video, and display timecode and transport information.UHD 4K Recording and PlaybackThe HypeDeck Studio 12G records video to uncompressed QuickTime at 10-bit with 4:2:2 color sampling at up to UHD 4K (3840 x 2160) at 60 fps. It also records to ProRes 422(HQ), ProRes 422, ProRes 422 (LT), ProRes 422 (Proxy), as well as Avid DNxHD and Avid DNxHD MXF, also all in SD and SDTwo SSD BaysFor accepting storage media, the unit incorporates two 2.5" slots with SATA connectors for use with SSD drives. The ability to swap out drives while recording enables almost endlessly durations, seamlessly switching from one SSD to the other as the first one fills up.Video InputsThe HyperDeck Studio 12G supports SD, HD, 3G, 6G, and 12G signals over SDI and up to UHD 4K at 60p via HDMI 2.0.Video OutputsA total of four SDI outputs are provided: a single loop-out that mirrors the incoming signal, two playback outputs, and a dedicated monitor output. Additionally, there is a single HDMI 2.0 output with UHD 4K at 60p support that can serve as a loop-out, be used for playback, or connected to a local monitorVTR Style ControlsThe HyperDeck Studio 12G features VTR style front panel controls for record and playback. With illuminated buttons, for working in dim locations or settings, while a built-in jog/shuttle wheel provides analog style control over your playback.RemoteThe unit is controllable via RS-422 control and over the Ethernet or USB port.Built-In LCD MonitorThe unit's front panel also features a built-in LCD screen that allows you to monitor input or playback video as well as timecode, format, and audio levels.Included SoftwareThe HyperDeck Studio 12G includes HyperDeck Utility, Media Express, Disk Speed test, Blackmagic System Preferences, and Blackmagic driver software. | Model: CONVMBHS24K6GThe Blackmagic Design HDMI to SDI 6G Mini Converter converts HDMI to SD, HD, 3G, or 6G-SDI in resolutions up to DCI 4K (4096 x 2160) at 24p and UHD 4K (3840 x 2160) up to 30p. This is useful for connecting consumer devices that output HDMI signals with professional SDI video equipment. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post-production, and professional AV applications.Using 4K HDMI and 6G-SDI technologies, the Mini Converter automatically detects the input video format and instantly changes between SD, HD, and UHD/DCI 4K formats. The two 6G-SDI outputs also support SD and HD-SDI signals for integration into existing workflows. Both 6G-SDI outputs send duplicate signals. Audio is embedded in the SDI output from either the HDMI input or from the two 1/4" input jacks which support four channels of AES/EBU digital audio or two channels of analog audio.The Mini Converter's settings are controlled using the built-in switches or via USB using the control software for Max OS X or Windows computers, which can be downloaded on Blackmagic Design's website. The USB port also enables the firmware to be updated.The device is powered by an included 12V power supply and includes international socket adapters.Additional Features- 4:2:2 Sampling and color precision
- HD scaler and SD down-conversion
- 24-bit, 48 kHz audio sampling
- Compliant with SMPTE 259M/292M/296M/372M/424M/425M Level A or B/SMPTE ST-2081, and ITU-R BT.656/BT.601 standards
| >Model: MultiView 4The ?Blackmagic Design MultiView 4 ?features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with increased clarity. The MultiView 4 allows for 2x2 display with each input fully re-synchronized. One 6G-SDI output and one HDMI multi-view output are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.Housed in a 1 RU machined aluminum frame, the MultiView 4 is ready for use in the studio, broadcast truck, or even on location. It can be controlled with the included control software via the Ethernet port or by an optional Teranex front panel (not included). For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240 VAC, or you can power the unit by 48 VDC PoE+.Note: ?IEC power cable is not included.- Native Ultra HD multi-view output
- 4x 6G-SDI inputs; accepts SD, HD, Ultra HD, and DCI 4K signals
- Supports Ultra HD 4K (3840x2160) up to 30p; DCI 4K (4096x2160) at 24p
- 1x 6G-SDI and 1x HDMI multi-view outputs
- 4x SDI loop outputs
- 2x2 multi-view configurations
- 2-channel audio meters for each view
- 16x9 SD support
- Tally support with ATEM switchers via optional Teranex Mini Smart Panel
- 1 RU machined aluminum chassis
- Software control over Ethernet; supports Videohub router protocol
- Built-in 90 to 240 VAC power supply
- IEC power cable required
- Supports PoE+ 48 VDC
| Model: HYPERD/ST2The ?Blackmagic Design HyperDeck Studio 2 ?is a file-based deck that features the same functionality and control of professional tape decks. It records uncompressed video with 4:2:2 color sampling at 10-bit in Quicktime format, and also records video using either ProRes or DNxHD codecs. With two SSD slots, you can record almost endlessly as one SSD becomes full, recording automatically continues on to the other. The HyperDeck Studio features one 3G-SDI input and three SD/HD/3G-SDI outputs plus a loopthrough output, and one HDMI input and one HDMI output. All outputs, except the loopthrough SDI, are always active, so playback is available on both the SDI and HDMI outputs no matter what input it was recorded from.The Studio 2 is a 1RU rack mountable unit, with built-in rack mount ears. It features illuminated front panel button control and a jog/shuttle wheel for analog scrubbing. RS-422 control is supported for external control. You can also control the unit using either the USB port or over Ethernet via the RJ45 connector. An integrated LCD on the front panel allows you to monitor the video, and display timecode and transport information.File-Based RecordingThe HypeDeck Studio 2 records to uncompressed Quicktime at 10-bit with 4:2:2 color sampling. It also records to ProRes 422(HQ), Avid DNxHD and Avid DNxHD MXFTwo SSD BaysThe unit incorporates two 2.5" SSD slots that allow you to record almost endlessly as recording seamlessly switches from one SSD to the other as the first one fills up.Video SignalsThe HyperDeck Studio 2 features separate dedicated input & output connectors, and supports SD/HD signals over SDI and HDMI. In addition to NTSC and PAL signals, 720 x 480p and 720 x 576p signals are only supported over HDMI.VTR Style ControlsThe HyperDeck Studio 2 features VTR style front panel controls for record and playback. With illuminated buttons, for working in dim locations or settings, while a built-in jog/shuttle wheel provides analog style control over your playback.Outputs- The HyperDeck Studio 2 features one HDMI, two SDI, and one SDI monitor out which are always active, no matter what the original input signal is. The exception is with 480p & 576p signals over HDMI, these signals will only play back over the HDMI output.
- The unit also features a loopthrough SDI output that only passes the signal from the SDI input, and does not output recorded video from the SSDs.
RemoteThe unit is controllable via RS-422 control and over the Ethernet or USB port.Built-In LCD MonitorThe unit's front panel also features a built-in LCD screen that allows you to monitor input or playback video as well as timecode, format, and audio levels.SDI ConnectorsThe unit's SDI connectors are 3G capable, but currently the unit only supports HD video up to 1.5Gb/s (HD-SDI).Included SoftwareThe HyperDeck Studio 2 includes HyperDeck Utility. |
