| Description | Key Features- Adjustable Ball Heads on Both Ends
- 1/4"-20 Screw on One End
- NATO Clamp on Other End
- 5.5" Long, Load Capacity: 3.3 lb
| Key Features- Rosette Mounting Plate for Ronin-S/SC
- Also Fits Zhiyun CRANE 3 & WEEBILL S/LAB
- Mount 5" Monitor on Handheld Gimbal
- Load Capacity of 2.2 lb
Attach a 5" monitor to the handle of your DJI Ronin-S/SC, Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB handheld gimbal with this ?SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane. | Key Features- Add 15mm Rod to BMPCC 6K and 4K Cages
- Single 15mm Rod Clamp
- Add Follow Focus Motor or Accessory
- Attach to Cage with Two 1/4"-20 Screws
Attach a 15mm rod to your cage for the Blackmagic Design Pocket Cinema Camera 6K and 4K to add a follow focus motor or other accessory using this ?Single 15mm Side Mount Rod Clamp ?from ?SmallRig. | SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304
1. 8 inches ARRI dovetail plate;
2. Multiple 1/4? ? -20 and 3/8? ? -16 threaded holes;
3. Multiple through slots;
4. Safety pins on both sides.SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304 ?is compatible with ARRI baseplate such as ?SmallRig 1642, ?2266, ?2035, etc. It features multiple 1/4? ? -20 and 3/8? ? -16 threaded holes for tripod attachment. It also comes with several through slots where you can put in screws for tripod attachment, or mounting to ?SmallRig Shoulder Pad 2057. On both sides there are safety pins preventing the camera rig from accidentally sliding off. | Key Features- Pair of 15mm Rods
- Lightweight Carbon Fiber Construction
This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 4" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. | Key Features- Y-Shaped Universal Lens Support
- 15mm LWS Rod Bracket
- Half-Rod Clamp Design for Quick Release
- 0.2" Horizontal Adjustment
The dark olive ?BSL2644 15mm LWS Universal Lens Support ?from ?SmallRig ?can be used to support a longer lens on your camera when used with a separately available 15mm LWS rod system. |
| Content | Featuring a ball head at each end, the 5.5" long ?Magic Arm with Dual Ball Heads with 1/4"-20 Screw and NATO Clamp ?from ?SmallRig ?can be used to mount a monitor or accessory onto your camera rig at almost any angle.Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum arm has a payload capacity of up to 3.3 lb. Both ball heads are secured using the single, large thumb lever and feature rubber gaskets for a solid grip. Each end features a tightening thumbscrew for easy accessory mounting.Upgrade your setup with the SmallRig Articulating Arm with Screw Ballhead (2071), featuring a screw ballhead and NATO clamp ballhead for versatile accessory mounting. This flexible arm allows precise positioning of your gear, providing ease of use and creative flexibility.The robust design ensures stability, while the dual ballheads offer secure attachment and quick adjustments. The NATO clamp ballhead provides additional mounting options, expanding your creative possibilities. Whether you're a filmmaker or photographer.The SmallRig Articulating Arm with Screw Ballhead is an essential tool for customizing your rig to suit your specific needs. Elevate your creativity and also streamline your workflow with this reliable and versatile articulating arm. | Attach a 5" monitor to the handle of your DJI Ronin-S/SC, Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB handheld gimbal with this ? SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane.The mount attaches to the mounting threads of the Zhiyun CRANE 3, WEEBILL S, or WEEBILL LAB with a built-in thumbscrew, and a rosette plate is included to attach the mount to the Ronin-S or Ronin-SC with two included M4 screws.The SmallRig Adjustable Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane durable aluminum mount features 1/4"-20 monitor mounting thumbscrew as well as three 1/4"-20 threads and a shoe mount for additional accessories. The monitor bracket features 180 ? tilt and can hold a monitor rig up to 2.2 lb. An Allen wrench is also included to tighten the mounting screws. See below for the list of compatible monitors.Gimbal Compatibility
DJI Ronin-S
DJI Ronin-SC
Zhiyun CRANE 3 LAB
Zhiyun WEEBILL S
Zhiyun WEEBILL LABMonitor Compatibility
Any 5" monitor kit that weighs less than 2.2 lb
SmallHD Focus Series monitorsSmallRig Adjustable Monitor Mount
SmallHD Focus OLED series monitors
SmallHD UltraBright series monitors
SmallHD 500 series monitors
SmallHD 700 series monitors
Atomos Ninja series monitors
Blackmagic Design Video Assist 5" monitors | Attach a 15mm rod to your cage for the Blackmagic Design Pocket Cinema Camera 6K and 4K to add a follow focus motor or other accessory using this ?Single 15mm Side Mount Rod Clamp ?from ?SmallRig. It's compatible with the SmallRig 2203, CVB2254, and CVB2255 cages for Blackmagic Design Pocket Cinema Camera 6K and 4K.The aluminum clamp attaches to the cage using the two included 1/4"-20 screws. The rod clamp secures a separately available 15mm rod with a locking lever.Compatibility
Blackmagic Design Pocket Cinema Camera 6K/4K
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2203)
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2254)
SmallRig Blackmagic Design Pocket Cinema Camera 6K/4K cage (2255) | SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304
Key Features:
1. 8 inches ARRI dovetail plate;
2. Multiple 1/4? ? -20 and 3/8? ? -16 threaded holes;
3. Multiple through slots;
4. Safety pins on both sides.SmallRig 8'' Lightweight ARRI Dovetail Plate DPR2304 ?is compatible with ARRI baseplate such as ?SmallRig 1642, ?2266, ?2035, etc. It features multiple 1/4? ? -20 and 3/8? ? -16 threaded holes for tripod attachment. It also comes with several through slots where you can put in screws for tripod attachment, or mounting to ?SmallRig Shoulder Pad 2057. On both sides there are safety pins preventing the camera rig from accidentally sliding off. | This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 4" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. | The dark olive ?BSL2644 15mm LWS Universal Lens Support ?from ?SmallRig ?can be used to support a longer lens on your camera when use with a separately available 15mm LWS rod system. The rod bracket has a half-open design so the support can quickly mounted and removed. This unit's center column attaches to a Y-shaped lens support and offers 0.2" of horizontal adjustment.Enhance your videography with the SmallRig 15mm LWS Universal Lens Support BSL2644, a versatile accessory designed for optimal lens stability. Crafted with precision, this support system is compatible with a variety of lenses, providing essential reinforcement during dynamic shots.The adjustable height and width accommodate diverse lens sizes, ensuring a secure fit for your specific gear. The 15mm LWS (Lightweight System) standard ensures seamless integration with your existing rig, offering flexibility and ease of use.The anti-slip surface and dual-screw design enhance stability, preventing unwanted movement and vibrations during filming. Whether you're capturing fast-paced action or slow, controlled shots, SmallRig's Universal Lens Support is a reliable tool to maximize.The potential of your lens collection, bringing an extra layer of confidence to your creative endeavors. Elevate your videography experience with this essential SmallRig accessory. |
