| Description | Key features- 40" Main Section
- Detachable Turtle Base
- Two Risers
- 40" Arm and Grip Head
| Key featuresFlags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. | Key features- Adapts 5/8" Stud to 1/4"-20 Male Thread
| Key features- 20" Main Riser
- 2 Risers
- Sliding Leg
- 20" Arm with Grip Head
| Key featuresAlso known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. | Key featuresThis is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 6 inches. |
| Content | This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" three-section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip head, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set.
Matthews Century C+ Stand with Removable Turtle Base (10.5')
The Century C+ Stand with Removable Turtle Base from Matthews features a 40" main riser with a removable turtle base. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set.Removable turtle base eases storage and transport
Matthews Hollywood Gobo Arm - 40"
This 40" Hollywood Gobo Arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. Plates feature two holes 3/8 and 5/8", eliminating confusion. Castings offer positive lock in all directions.
Matthews Hollywood Grip Head - 2-1/2"
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions. | Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.Newly designed 90 ? Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. | This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-20 female thread to be mounted onto anything with a 5/8" Baby Pin. The Baby Pin is commonly used in the motion picture industry and can be found on everything including stands, rods, clips, clamps, and more. | This is a Matthews Hollywood Century "C" Stand with 20" main section, 2 risers and sliding leg base. It includes a 20" arm and grip head. When the stand and arm are extended, the top height is 5.25' (1.6 m).The unique staggered leg design of a C Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable for greatest positioning possibilities.This stand/arm combo is also available with a removable "Turtle" base. Order # 756120.The spring-loaded independent leg adjustment levels the load on uneven terrain.Arm and grip head may be used for small fixtures, or positioning of gobos | Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame.For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light.More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames. | This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 6 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. |
