Description | - Sophisticated Conversion
- Converts an HDMI input to up to 2 low-jitter SDI outputs
- Conversion allows the use of longer professional SDI cables
- The SDI outs auto-match the SD / HD quality of the HDMI input
- Both the HDMI and the SDI connections support up to1080p60 HD
- Audio embedded on the HDMI in goes out embedded on the SDI outs
- Battery and/or Adapter Power
- A built-in battery provides more than 2 hours of charge
- The battery can be recharged while the converter is in use
- A toggle switch allows you use the battery only when needed
- An LED indicator displays what the charge level of the battery is
- An adapter is included for external power and to charge the battery
- Super Tough Design
- Machined of aircraft grade aluminum
- Can be run over by a truck and still work
- Small enough to fit into the palm of a hand
- Scratch-resistant labels / non-slip rubber feet
| Model: PSUPPLY/XLR12V30- Terminates in 4-Pin XLR Connector
The ?Black Magic Design Studio Camera Power Supply ?is a power supply brick that attaches to the XLR connector of your camera. You can connect it to a wall socket via one of the included Blackmagic Design wall-socket adapters. | >Model: PSUPPLY-INT12V10W- Use with Mini Converters and HyperDeck Shuttle
The ?Blackmagic Design PSUPPLY-INT12V10W ?is a replacement power supply that can be used with any Mini Converter in the series as well as the HyperDeck Shuttle. As with the original unit, this power supply includes socket adapters for international countries | - Replacement Power Supply
- Use with 12V Studio Hardware
- Includes Worldwide Plug Adapters
| The Blackmagic Design PSUPPLY-12V12A is a replacement power supply unit for the Broadcast Videohub router. | Model: PSUPPLY-12V10W- Supplies Power to Pocket Cinema Camera
- Also Recharges Battery in the Camera
The ?Power Supply for Pocket Cinema Camera ?from ?Blackmagic Design ?is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a 0.7 mm DC jack connector specifically to fit the Pocket Cinema Camera. It takes approximately an hour and fifteen minutes to |
Content | The ?Blackmagic-Design SDI to HDMI Battery Converter ?converts an SDI input to an HDMI output and additionally features an SDI loop-through output. The HDMI output automatically matches and outputs in the quality of the SDI input, whether HD or SD; whatever comes in is what automatically goes out. Both the HDMI and SDI connections support up to 1080p60 HD, which on the SDI side is equivalent to 3G. The converter also supports embedded audio on both the in and outs.Converting to HDMI lets you connect SDI camera outputs to HDMI monitors on location. And the SDI loop-through allows connection to further SDI equipment.Power is by a built-in lithium-ion polymer rechargeable battery that allows on location work without external power, and an AC power supply is additionally also included.Sophisticated Conversion- Converts an SDI in to an HDMI out / features SDI loop out
- Conversion allows connection to professional HDMI monitors
- The HDMI out auto-matches the SD / HD quality of the SDI input
- Both the SDI and the HDMI connections support up to1080p60 HD
- Audio embedded on the SDI in goes out embedded on the HDMI out
Battery and/or Adapter Power- A built-in battery provides more than 2 hours of charge
- The battery can be recharged while the converter is in use
- A toggle switch allows you use the battery only when needed
- An LED indicator displays what the charge level of the battery is
- An adapter is included for external power and to charge the battery
Super Tough Design- Machined of aircraft grade aluminum
- Can be run over by a truck and still work
- Small enough to fit into the palm of a hand
- Scratch-resistant labels / non-slip rubber feet
| Model: PSUPPLY/XLR12V30
The ?Black Magic Design Studio Camera Power Supply ?is a power supply brick that attaches to the XLR connector of your camera. You can connect it to a wall socket via one of the included Blackmagic Design wall-socket adapters | >Model: PSUPPLY-INT12V10W
The ?Blackmagic Design PSUPPLY-INT12V10W ?is a replacement power supply that can be used with any Mini Converter in the series as well as the HyperDeck Shuttle. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected. | - This is a replacement ?12V Power Supply ?compatible with select Blackmagic Design products, including the HyperDeck Studio Recorder, UltraStudio Pro, 3D Capture and Playback devices, ATEM Studio Converter, Blackmagic Cinema Camera 2.5K (EF/MFT models), SmartView Duo and HD Monitors, ATEM Television Studio Production Switcher, SmartScope Duo 4K, and Blackmagic Production Camera 4K. It includes international wall socket adapters for worldwide use.
| The Blackmagic Design PSUPPLY-12V12A is a replacement power supply unit for the Broadcast Videohub router. | Model: PSUPPLY-12V10W
The ?Power Supply for Pocket Cinema Camera ?from ?Blackmagic Design ?is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a 0.7 mm DC jack connector specifically to fit the Pocket Cinema Camera. It takes approximately an hour and fifteen minutes to recharge a battery while the camera is off and approximately two hours when the camera is in use. |
Additional information | Weight | 1.35 kg |
---|
Dimensions | 6 × 5 × 3 cm |
---|
| Weight | 0.75 kg |
---|
Dimensions | 7 × 4 × 2 cm |
---|
| Weight | 0.5 kg |
---|
Dimensions | 5 × 3 × 3 cm |
---|
| Weight | 0.5 kg |
---|
Dimensions | 5 × 4 × 2 cm |
---|
| Weight | 1.65 kg |
---|
Dimensions | 7 × 3 × 2 cm |
---|
| Weight | 0.5 kg |
---|
Dimensions | 5 × 3 × 3 cm |
---|
|