Rode Broadcaster Voice-Over Microphone Kit

Rode Broadcaster Voice-Over Microphone Kit Large Diaphragm Recording Microphones Rode

Rode Broadcaster Voice-Over Microphone Kit

  • No Review
USD 699.78

Key features

  • Complete Kit
  • Includes Broadcaster Microphone
  • Includes Broadcast Arm with XLR Cable
  • Includes Foam Windscreen
Availability : onbackorder
Compare

Description

Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.

Rode Broadcaster Condenser Microphone

The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.

It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.

The Broadcaster features an ‘On-Air’ indicator on the body that can be wired for external activation by the ‘Channel On/Mute’ function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

HF2 1″ capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.

O.C. White Podcast Pro by Accu-Lite Mic Boom Package

Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9” of cable at the front, and 6’ at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you’re ready to go.

Note:Microphone not included

Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics

The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.

This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.

The WCF-UB440’s foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5″ and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2″.

The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.

Fits these and other similar sized microphones:

AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1.

Specifications

Rode Broadcaster Condenser Microphone Specs

Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1″ / 25.40mm
Polar Pattern Cardioid

 

Frequency Range 20 Hz to 20 kHz
Maximum SPL 128 dB SPL
Impedance 40 Ohms
Sensitivity -34 dB
Equivalent Noise Level 14 dB A-Weighted
THD 1%

 

Output Connectors (Analog) 1 x XLR 3-Pin

 

Operating Voltage 24 V
48 V

 

Dimensions ø: 2.56 x L: 6.57″ / ø: 65 x L: 167mm
Weight 1.27lb / 577g

 

Package Weight 2.015 lb
Box Dimensions (LxWxH) 10.7 x 5.3 x 2.4″

O.C. White Podcast Pro by Accu-Lite Mic Boom Package Specs

Reach 38″ / 97 cm
Cable XLR Cable
Front End: 9″ / 22.9 cm
Back End: 6′ / 1.8 m
Clamp Table Edge C-Clamp
Weight Capacity 1.4 lb / 0.6 kg
2.5 lb / 1.1 kg
Dimensions Not Specified by Manufacturer
Weight Not Specified by Manufacturer

 

Package Weight 4.5 lb
Box Dimensions (LxWxH) 23.5 x 8 x 2.5″

Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics Specs

Material Foam

 

Package Weight 0.04 lb
Box Dimensions (LxWxH) 5 x 2.85 x 2.8″

Reviews

There are no reviews yet.

Be the first to review “Rode Broadcaster Voice-Over Microphone Kit”