Description | - For Saramonic SR-TM1 Microphone
- Reduces Wind Noise
- Protects Mic from Moisture and Dirt
- Easy Slip-On Design
The ?TM-WS1 Furry Outdoor Microphone Windscreen ?from ?Saramonic ?is designed to fit the Saramonic SR-TM1 microphone (sold separately). The furry windscreen's slip-on design can be used to reduce wind noise for the SR-TM1 microphone in outdoor | Saramonic SR-MSM500 STEREO BAR MICROPHONE MOUNT FOR X-Y & ORTF RECORDING WITH 5/8? , 3/8? , 1/4 20? & SHOE MOUNTS | - For VmicLink5 Wireless Systems
- For VmicLink5 HiFi Wireless Systems
- For Canon EOS M3, 750D, and 760D Cameras
- Replacement or Spare Battery
The ?Saramonic SR-VML5B ?is a rechargeable lithium-ion battery. Use it with the VmicLink5 or the VmicLink5 HiFi, specifically with those systems' transmitters and receivers. The battery also works with Canon EOS M3, 750D, and 760D cameras. Keep this battery on hand | - For SR-WM4C Wireless System
- Mounts to Camera Hot/Cold Shoe
- 1/4"-20 Female Threads
- Integrated Locking Disk
The SWM4C-HA1 Shoe Mount Adapter from Saramonic is for the VHF SR-WM4C wireless microphone system (sold separately). It can use to attach the portable wireless bodypack receiver to the shoe mount on the video camera. | - For SR-WM4C Wireless System
- Half Wave VHF Replacement Antenna
- Locking Thread Connector
- Flexible Design
The WM4C-A1 is a replacement 1/2 wave VHF antenna for the transmitter or receiver of the SR-WM4C wireless system. ?It features flexible design and a locking-thread connector. | - For UwMic9 and UwMic10 Wireless Systems
- Fits VmicLink5, UwMic15 Wireless Systems
- Mounts to Camera's Hot/Cold Shoe
- 1/4"-20 Female Threads
The SR-UM10-MC1 Shoe Mount Adapter from Saramonic is a replacement part for the Saramonic UwMic9. UwMic10, VmicLink5, and UwMic15 wireless microphone systems (sold separately). It can used to attach the portable wireless bodypack receiver to the hot or cold shoe mount of the video camera. |
Content | The TM-WS1 Furry Outdoor Microphone Windscreen from Saramonic is design to fit the Saramonic SR-TM1 microphone (sold separately). The furry windscreen's slip-on design can used to reduce wind noise for the SR-TM1 microphone in outdoor applications. In addition, it protects the mic from dirt and moisture. | Saramonic Dual Adjustable Microphone Mount
The Saramonic SR-MSM500 is a full-featured stereo bar that enables you to mount 2 microphones up to 7.9? (20 cm) apart and provides clearly printed markers for distances and angles, as well as ORTF and X-Y positioning on both the front and back of the unit.Included spacers allow you to easily stack microphones at varying heights to execute different stereo techniques. This is an indispensable tool for creating accurate and dramatic recordings of live performances, choirs, ensembles, orchestras, acoustic instruments and more. It's also essential for capturing environmental stereo soundscapes, ambiance, and sound effects for video and film production.The two microphone mounting points on the SR-MSM500 feature standard 3/8? male threads, and nicely-sized dials on the underside of the unit enable you to easily fasten and unfasten microphones, as well as slide them into the desired position.The bottom center of the bar features a standard 5/8? female thread for mounting to microphone stands, a 3/8? to 5/8? thread adapter and a camera shoe-mount with 1/4? 20 thread is included to give you near limitless mounting options.Saramonic Dual Adjustable Microphone Mount
Also, included are 2 microphone clips for cylindrical mic sized between 0.74 - 0.86" (19mm-25mm) in diameter, such as small-diaphragm pencil microphones. The SR-MSM500 is compact and lightweight, yet sturdy enough to confidently hold pairs of large diaphragm condenser microphones.When you remove a spacer to position a pair of microphones in the X-Y placement where one microphone is higher than the other. Instead of setting the unused spacer aside and potentially misplacing it. The SR-MSM500 was designed to allow you to clip it back into the underside of the bar so all of the parts remain together.The SR-MSM500 is a remarkably affordable yet high-quality and essential accessory. For creating a large variety of stereo recordings for music production and for capturing dramatic. And also engaging ambiances and effects for video and film.Features:- High-quality stereo bar mount with clearly printed markers on the front and also back for angles. Distances, X-Y and ORTF, removable spacers for proper positioning
- Wide enough to mount microphones up to 7.9? (20 cm) apart. Perfect for matched pairs of professional condenser microphones
- Gives you the ability to precisely capture orchestral performances. Choirs, ambient environmental soundscapes, acoustic instruments and more
- Sturdy design confidently holds pairs of large diaphragm condenser microphones
- Compact, lightweight and easy-to-use with 5/8? , 3/8? , 1/4" 20 & camera shoe mounting options included
| The Saramonic SR-VML5B is a rechargeable lithium-ion battery. Use it with the VmicLink5 or the VmicLink5 HiFi, specifically with those systems' transmitters and receivers. The battery also works with Canon EOS M3, 750D, and 760D cameras. Keep this battery on hand for long days or long shoots, as it's always good to have a spare. | The Saramonic WM4C-HA1 Shoe Mount Adapter is for the VHF SR-WM4C wireless microphone system. It can use to attach the portable wireless bodypack receiver to the shoe mount on the video camera. In addition, it is equip with a 1/4"-20 thread and an integrated locking disk to secure it to the camera shoe. | The Saramonic WM4C-A1 is a replacement 1/2 wave VHF antenna for the transmitter or receiver of the SR-WM4C wireless system. It features a flexible design and a locking-thread connector. | The ?SR-UM10-MC1 Shoe Mount Adapter ?from ?Saramonic ?is a replacement part for the Saramonic UwMic9. UwMic10, VmicLink5, and UwMic15 wireless microphone systems (sold separately).It can used to attach the portable wireless bodypack receiver to the hot or cold shoe mount of the video camera. In addition, it is equipped with a 1/4"-20 female thread and also an integrated locking disk to secure it to the camera. |