| Content |
>SmallHD MON-FOCUS-BOLT-500-TXRX-KIT-INT ?OverviewThe ?SmallHD FOCUS Bolt 500 TX-RX Kit with International Charger Power Supply ?combines the FOCUS Bolt 500 RX and TX monitors for a full wireless monitoring experience.Connect the FOCUS Bolt 500 TX to your camera and give your director or focus puller the FOCUS Bolt 500 RX and you can view HD video without cables (other than the HDMI connection to the video source). The small sizes of the TX and RX monitors make them easy to mount on a camera or rig or use handheld. With the TX monitor you get the FOCUS tilt arm, and with the RX you get the monitor, rubber handles, and a neck strap.Each monitor comes with required cables, an L-series battery kit, monitor protection filters, cable clips, and a cleaning cloth. Also included is an international battery charger power supply kit. For more information on both of these monitors, check the features below.SmallHD FOCUS Bolt 500 TX On-Camera MonitorThe ?SmallHD FOCUS Bolt 500 TX On-Camera Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless transmitter, all in a single unit. Using the built-in transmission, the Focus Bolt can send uncompressed 10-bit 4:2:2 HD video to a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT, or Sidekick II receiver, or to a SmallHD FOCUS Bolt 500 RX or 703 Bolt monitor, up to 500' away. What's more is this monitor fits right atop your camera's accessory shoe using the included tilt-arm. An L-series battery kit, cable clips, matte and glossy screen protectors, a cleaning cloth, and an assortment of HDMI cables are included as well.Display-wise, the FOCUS Bolt 500 TX is based off the same display and I/O as the well-regarded standard FOCUS models. The bright, 800 cd/m2, 1280 x 720 touchscreen IPS LCD panel can be viewed in daylight, and is driven by a single micro-HDMI input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. At the rear of the monitor, a single NP-F battery bay accepts the included available L-series battery for power, while an integrated power output can also power your camera with a separately available DC coupler.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.Camera Setup IntegrationThis monitor complements smaller cameras by providing power output and a headphone jack. The power output lets you power your camera directly from the NP-F battery mounted on the monitor, increasing runtimes over the standard batteries of many mirrorless cameras. If your camera doesn't have a headphone jack, the FOCUS de-embeds the audio from the HDMI stream for real-time feedback of audio.Convenient MountingThe FOCUS monitor secures to your camera using the included FOCUS Tilt Arm via shoe mount or 1/4"-20 thread. The Tilt Arm enables 180 ? of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, or LED light) that would otherwise be displaced from the camera's accessory shoe.SmallHD FOCUS Bolt 500 RX Wireless MonitorThe ?SmallHD FOCUS Bolt 500 RX Wireless Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless receiver, all in a single unit. Using the built-in receiver, the Focus Bolt can receive uncompressed 10-bit 4:2:2 HD video from a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT transmitters, or a SmallHD FOCUS Bolt 500 TX, from up to 500' away, line-of-sight. Comfortable rubberized handgrips are included along with a neck strap, so you can comfortably hold onto the monitor as you roam around the set. An L-series battery kit for powering the monitor, cable clips, matte and glossy screen protectors, a cleaning cloth, and a micro-HDMI to HDMI adapter are included as well.Display-wise, the FOCUS Bolt 500 RX is based off the same display and I/O as the well-regarded standard FOCUS models. The 800 cd/m ? bright touchscreen 1280 x 720 IPS LCD panel can be viewed in daylight and can be driven by either the single micro-HDMI input or the wireless input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. The wireless input only supports up to HD resolutions. At the rear of the monitor, a single NP-F battery bay accepts the included L-series battery for power.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease. | The Gold-Mount Plus 14V/26V Dual Battery Bracket from SmallHD is designed to power your SmallHD 4K monitor using one or two 14 or 26V batteries. This battery plate features a direct, cable-free plug-in design and easy mounting on the monitor's Arca-Swiss SmartRail.The bracket's dual design enables hot-swapping between two batteries as well as the monitor's 3-pin XLR power port. When used with select batteries, the bracket will pass battery data to your monitor.
Compatibility
SmallHD 4K monitors
Features
Supports both 14V and 26V batteriesEnables hot-swappingDirect plug-in design | CES 2018: What is the SMALL HD 703 Bolt 3000-NIT Monitor?Monitor your camera's feed completely free of wires with the SmallHD 703 Bolt 7" Wireless Director's Monitor Bundle. This bundle adds a Gold mount plate, side handles, and a neck strap to complement the monitor itself. Since the monitor can now operate on battery power from a separately available battery, with a compatible wireless connection, the 703 Bolt can be taken around the set fully untethered.Borrowing the wireless technology from Teradek, the 703 Bolt can receive uncompressed HD wireless signals from Bolt 500, 1000, or 3000 transmitters up to 300' away with no perceptible latency. With this feature, anyone can walk around the set while monitoring a camera feed, perfect for directors and camera assistants. Furthermore, despite the presence of a wireless receiver, the 703 Bolt maintains a slim profile similar to on-camera monitors.A unibody aluminum exterior keeps the monitor durable yet lightweight, while also acting as a heatsink for the internal electronics. The LCD panel itself is protected by a layer of optically-bonded Gorilla Glass, notable for its transparency and toughness. The optical bonding process ensures that blacks are not washed out and reduces the harshness of reflections.On the rear of the display is the SDI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory. All the functionality of the monitor is available via the PageBuilder OS, which provides advanced functionality with a simple and efficient graphical user interface.
PageBuilder OS
PageBuilder OS is an intuitive graphical user interface (GUI) that puts all the advanced functionality of the 703 Bolt at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, multiview, LUTs, and focusing aids on different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.
ColorFlow 3D LUT Processing
To keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Separate LUT-treated images can be sent downstream over SDI so you can have the 703 Bolt display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image capture function saves a still frame from the incoming video stream onto an SD card, and records the applied 3D LUT for post-production reference.
On-Set Problem Solving
PageBuilder OS has a dedicated "Output Preview" page which allows you to apply LUTs and other image adjustments specific to the output signal from the monitor. Whether you have your camera connected to the wireless or SDI inputs on the 703 Bolt, you are not limited by that connection; the 703 Bolt cross-converts to ensure compatibility with downstream hardware.
HD Scopes
Fill the screen with up to three simultaneous scopes, including waveform, vectorscope, and histogram, while still being able to observe the camera feed.
Exposure Tools
Exposure Assist supports both ARRI and Spectrum-based false color, with built-in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Customizable Focus Assist and Peaking Tools
As recording resolutions increase, so does the importance of focusing precision. With Focus Assist, you can highlight the areas that are in focus with a bright color. These highlights are easily visible on the fly for quick focus confirmation. Focus Peaking increases the sharpness of the image for a subtler focus confirmation without the need for bright outlines. The color and intensity of these tools are adjustable to fit your preference.
Versatile Frame Guides
Select standard markers and safety areas can be overlaid on the display as lines or matte overlays, with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9, and Custom (user-selectable). | The lightweight 7" SmallHD Cine 7 On-Camera 500 RX Monitor with Handles provides professional monitoring in a sharp 7" display suitable for outdoor use. The Cine 7 supports up to UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.The Cine 7 features a bright 1800 cd/m ?, 322 ppi, 1920 x 1200 IPS LCD touchscreen with 3D LUT compatibility. The 500 RX features a built-in wireless receiver that is compatible with Bolt 500 transmitters, and can receive Full HD video signals from up to 500' away. The 500 RX also features lightweight handles so you can move freely around the set.Using the intuitive Swipe OS3 you can turn on and save pages of various monitoring tools and focusing aids with a finger tap. At the rear of the monitor, a V-mount battery mount enables you to power the unit. An L-series battery plate and an AC battery kit are also included with the monitor.
Features
Daylight-viewable, 7" touchscreen on-camera monitor with 1800 cd/m ? brightnessSlim, lightweight design with 10-bit, touchscreen IPS LCD panelFeatures built-in wireless receiver, which is compatible with Bolt 500 transmitters and can receive video from up to 500' awayFeatures lightweight handles for mobility on setSupports up to 1080p60 video via full-size HDMI and 3G-SDI inputsHDMI to SDI and SDI to HDMI cross conversion is supportedUses SmallHD Swipe OS3 to organize and save customized function and settings pagesPower with the V-mount battery plateFour 1/4"-20 mounting points on top, left, right, and back
Software- Pixel zoom: 1.1 to 2x and 2 to 8x via swipe up/down, with pinch zoom
- DSLR scale: Canon 5D Mk II and Canon 7D
- Custom scale: Underscan only
- Anamorphic de-squeeze: 0.75x, 1.33x, 1.5x, 2.0x, 2.5x
- Image flip: Auto and manual
- Image rotation: Auto and manual
- Color focus assist: Adjustable style and intensity
- Peaking: Adjustable intensity
- False color: Spectrum, ARRI-style, and customizable
- Dual-zebra: Customizable
- Waveform: Luma and RGB, customizable with region of interest highlighting
- Vectorscope: Yes
- RGB parade: Customizable
- Histogram: Luma and RGB
- Image capture: With dedicated button and image gallery
- Custom LUTs: Load as looks on pages or as system-wide calibration via the settings menu
- LUT import: Via SD card or USB storage device
- Image overlay: Opacity slider and blink setting
- Audio meters: HDMI and SDI up to 8 channels
| Special for NAB 2018, the ?SmallHD 1303 HDR 13" Production Monitor Gold ?Mount Kit ?comes with everything you need to set up an HDR viewing screen in the studio or in the field. In addition to the 13" monitor, this kit includes SDI cables, a RapidRail accessory attachment, C-stand mount, standard and matte screen protectors, a sun hood, and the Gold ?mount power kit with a cheese plate. See below for more information on the individual items included in this kit.SmallHD 1303 HDR 13" Production MonitorSee beyond the restricted color and contrast of conventional monitoring with the ?SmallHD 1303 HDR 13" Production Monitor. Featuring HDR preview backed by a 10-bit Color Intelligence engine with calibration capabilities, the 1303 can display a large brightness range, encompassing log formats and other expanded-range picture styles. The 1500 cd/m ?, daylight-viewable, 1920x1080 Full HD resolution display panel can be driven by one of two SDI inputs or an HDMI input. Each input has a loop output for connecting other gear in-line without the need for a splitter. All functionality of this monitor is accessed via the innovative Page Builder OS. By implementing full aluminum construction and the provision for separately available user-replaceable polycarbonate screen protectors, SmallHD built this monitor to survive the rigors of production in studios and in the field.>Page Builder OSOriginally featured in the 500 and 700-series models, and extrapolated for the Production Monitor series, the Page Builder OS is an intuitive graphical user interface (GUI) that puts all of the advanced functionality of the 1303 at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveforms, vectorscopes, multiview, and focusing aids to up to 4 different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.ColorFlow 3D LUT ProcessingIn order to keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Side-by-side preview can also be used with the HDR preview function. Separate LUT-treated images can be sent downstream over SDI and HDMI so you can have the 1303 display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image-capture function saves a still frame from the incoming video stream onto an SD card and also records the applied 3D LUT for post-production reference.Color Intelligence EngineWhen a separately available color probe is connected to the monitor via USB, the SmallHD 1303 can automatically adjust a 10-bit 3D calibration LUT for maintaining accurate color reproduction over the life of the monitor.RapidRail Shoe-Mount SystemQuickly secure and detach accessories such as wireless units to the rear of the monitor using standard shoe-mount rails. This saves time over traditional screw-mounted methods and keeps your setup clean and neat. If required these accessories can be powered straight off the monitor using the integrated 12V LEMO power output or the 3 USB ports.Power OptionsSeparately available V-mount or Gold-mount battery plates can be attached to the rear of the display. A mounted battery can power the monitor as well as attached accessories through the 12V LEMO connection. The USB ports on the rear of the monitor can also power accessories with a maximum draw of 0.5 amps per port.SmallHD Thin BNC Cable (12")At only 2.75mm in diameter this ?Thin BNC Cable ?from ?SmallHD will snake around nearly any component you have in your rig, perfect for use in compact camera setups with an EVF or on-camera monitor which uses SDI.SmallHD Thin BNC Cable (24")At only 2.75mm in diameter this ?Thin BNC Cable ?from ?SmallHD will snake around nearly any component you have in your rig, perfect for use in compact camera setups with an EVF or on-camera monitor which uses SDI.SmallHD Thin BNC Cable (48")At only 2.75mm in diameter this ?Thin BNC Cable ?from ?SmallHD will snake around nearly any component you have in your rig, perfect for use in compact camera setups with an EVF or on-camera monitor which uses SDI.SmallHD RapidRail Mount for 1/4"-20 AccessoriesUse the ?SmallHD RapidRail Mount for 1/4"-20 Accessories to quickly secure 1/4"-20 accessories to 1300, 1700, 2400, or 3200 series monitors that feature the RapidRail mounting system. Built-in cable strain relief protects your equipment from cable snags, and dual 1/4"-20 threads allow for the securing of many common monitoring accessories.SmallHD Basic Acrylic Screen Protector for 1300 Series MonitorsThe ?SmallHD Basic Acrylic Screen Protector for 1300 Series Monitors is a clear, anti-scratch screen protector for SmallHD 1300 series 13" monitors. Quick and easy to attach and remove without anything else required, it provides screen protection for the monitor in transport and storage.SmallHD Sun Hood for 1300 Series MonitorsThe ?SmallHD Sun Hood for 1300 Series Monitors attaches to the monitors using six included 1/4"-20 thumbscrews and provides three-sided glare protection. It secures to the 1/4"-20 threaded holes around the monitor.SmallHD C-Stand Mount for 1300 Series MonitorsDesigned specifically for SmallHD 1300 Series monitors, this compact ?C-Stand Mount ?from ?SmallHD ?allows you to quickly and securely attach your 1300 Series 13" monitor to a standard C-stand. | Control your ARRI ALEXA Mini, Mini LF, or AMIRA camera with your SmallHD Cine 7 monitor using this Cine 7 Monitor Camera Control Kit. The kit includes a software license that provides full control via CAP (Camera Access Protocol) over your camera, a 3' locking 10-pin to Ethernet camera control cable, a 2' SDI cable, and a standard Ethernet cable. Also included is a neoprene sleeve to store your cable set.Read below for the supported camera controls available with the software kit, all available via the Cine 7 touchscreen.
Compatibility
SmallHD Cine 7 monitor
ARRI ALEXA Mini, ALEXA Mini LF, and AMIRA cameras
Supported Camera Controls- Record Start
- Record Stop
- Playback Control
- Set and Read TC
- Set and Read Project Rate
- Read and Set System Date/Time
- Read Clip List from Medium
- Camera Type
- Camera Serial
- Camera State
- Look File Name
- Color Temperature
- Tint Variable
- Exposure Index
- Sensor FPS List
- Sensor FPS
- Shutter Angle List
- Shutter Angle
- Exposure Time List
- Exposure Time
- Exposure Index List
- ND Filter List
- ND Filter
- White Balance List
- Media Status
- Recording Mode
- Clip Scene
- Clip Take
- Medium Type
- Model Name
- Serial Number
- Clip Count
- Current Reel
- Medium Size
- Medium Status
- Write Protection
- Clip Count
- Current Reel
- Free Capacity
- Clip File Name
- Clip UUID
- Clip Project Rate
- Clip Start TC
- Clip Duration TC
|
