Libec RS-450DM Tripod System with Mid-Level Spreader

The RS-450DM Tripod System from Libec includes the RT40RB tripod legs with a 75mm bowl, the RH45D tripod head, the BR-6B mid-level spreader, FP-2B large rubber feet, and the RC-50 case. The RT40RB tripod legs are height adjustable from 18.5"" to 5.16'.
\n
\nThey accommodate a head with a ball diameter of 75mm, and are designed to work with the RH45D head. The BR-6B is a mid-level spreader for the tripod. And the FP-2B features a set of 3 large rubber feet. The RC-50 black tripod case is a padded case with rubber feet, designed to carry your tripod.
\n

Libec RH45D Fluid Head

\nDesign for ENG cameras weighing up to 26.5 lb, the RH45D Fluid Head from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8""-16 screw. Having both options available means you can transfer the RH45D from a tripod with a bowl mount to a flat-mount slider.
\n
\nTo achieve proper balance, the head includes a sliding camera plate with 1.6"" of fore/aft adjustment. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide a smooth action with reduced backlash and unnecessary ""bouncing.""
\n
\nIncluded with the head is a PH-6B pan handle. The handle is extendable for better reach or more precise movement. The bar can placed on the right or also left side of the head by screwing it onto one of the rosettes.
\n

Continuous Counterbalance

\nThis fluid head is equipped with an continuously adjustable counterbalance system that can fine-tuned. To provide the correct amount of counterforce that corresponds to the weight and also angle of your camera. Different cameras can used and also correct counterbalance can be set for each camera configuration.
\nFluid Drag System
\nThe fluid drag mechanism reduces backlash that can occur at the beginning. Or also end of panning/tilting moves.
\nLow Temperature Performance
\nThe RH45D is rated to be used in temperatures down to -40 ?F. Without seriously impacting the performance of the fluid drag system.
\nLibec RT40RB 2-Stage Tripod Legs With 75mm Bowl
\nThese Libec RT40RB 2-Stage Tripod Legs With 75mm Bowl are 2-stage aluminum legs design for use with shoulder cameras with high rigidity. The legs have a maximum height of 5.16' and also a minimum height of 18.5"".
\n
\nThey can accommodate a head with a ball diameter of 75mm. Aluminum die casting material is use for the casing for the upper leg fixation screw to ensure a high level of stability. The weight of the legs is 6.8 lb.
\n
\nDesign for use with shoulder cameras with high rigidity2-stage aluminum legs, Maximum height of 5.16'. Aluminum die casting material is use for the casing for the upper leg fixation screw to ensure a high level of stability
\n
\nLibec BR-6B Mid-Level Spreader
\n
\nQuickly set up your tripod as well as add stability with the BR-6B Mid-Level Spreader from Libec. Compatible with the RT40RB, RT50B, RT50C, T102B, and also T103B tripods. This telescopic model can extend from 7"" to 10.3"" to accommodate a wide range of leg angles.
\nLibec FP-2B Large Rubber Feet (Set of 3)
\nLibec FP-2 Large Rubber Feet ensure stable shooting with RT-30B two-stage tripods.
\n

Libec RC-50 Tripod Case for RT40RB (Black)

\nThe black RC-50 Tripod Case for RT40RB from Libec is a heavy-duty. Padded case built for strength and also the rigors of transportation. Its wide opening end-to-end mouth makes access to your tripod easy and also less time consuming.
\n
\nThe case is made out of a rugged, water-resistant polyurethane coated polyester. Rubber feet have been incorporated into the bottom of the bag for ground protection and also more shock absorption.
\n
\nThe RC-50 is carried by its two top intertwined carry handles with plastic grip or also its removable shoulder strap. Inside, there's a convenient zippered storage pocket for items such as a pan handle.
\n
\nDesign with end-to-end wide openings, providing quick and also easy access to your tripod. Surfaces are fully equipped with solid padding to provide shock protection during transportation. Made of water-resistant PU (polyurethane) coated polyester equip with a heavy-duty zip fastener.
\n
\nThe bottom protector absorbs external impacts during transportation. Design for comfortable use, the main handle is plastic-gripped. A tough side-handle is attached and also comes with a detachable padded shoulder strap. Equipped with an inner pocket to store accessories such as a panhandle