| Description | Key features- Mobile Journalist, Vlogger, Run & Gun
- For Cameras and Portable Recorders
- 100-Hr Run Time via 9V Battery
- Selectable Pad and Bass Roll-Off
| Key features- Replacement Capsule for the NT4 / NT5 / NT6 and NT55 Microphones
| Key features- Condenser Capsule
- Supercardioid Polar Pattern
- Wide Frequency Response
- Detailed Vocal Reproduction
| Key features- 20 Hz to 20 kHz Frequency Response
- Dual 1/2" Gold-Sputtered Capsules
- Phantom or Battery Powered
- 5-Pin Stereo to 2 x 3-Pin XLR Cable
| Key features- Dual Condenser Elements in XY Pattern
- 24-Bit 96 kHz Resolution
- Integrated iClamp for Securing to Device
- Works with R? DE Rec App
| Key features- HF2 1" Capsule, Gold-Plated Diaphragm
- Cardioid Polar Pattern
- True Condenser (Externally Biased)
- Full Frequency Response
|
| Content | Compared to the smaller VideoMic GO, the Rode VideoMic camera-mount shotgun microphone offers battery powering, extended low-end response, and customizable audio settings. Its switchable pad and bass roll-off optimize it for mobile journalists, vloggers, and run-and-gun shooters in loud or rumble-heavy environments.This shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The attached 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
Easy Hookup to Camera
A coiled 3.5mm cable is permanently attached to the mic for fast hookup to your camera. The cable's 3.5mm TRS plug is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Long Battery Life
Pop a 9V battery in the VideoMic for up to 100 hours of operating time. The dedicated power LED changes from green to red when the battery should be replaced. The VideoMic can still function for approximately one hour once the power indicator turns red, but performance will be compromised. Use the power switch to conserve battery life during periods of inactivity.
Bass Roll-Off
The high-pass filter can be set to flat or 80 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic.
Selectable Pad
To protect against distortion, the VideoMic offers a pad that reduces the signal level. Switch to the -10 dB option when loud sound sources threaten to distort your recording, use the -20 dB position to prevent extreme input levels from clipping causing clipping, or select the flat setting when routing the mic into a dedicated high-quality preamp.
Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).
Windscreen Minimizes Wind Noise
The VideoMic has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat (available separately).
Connectivity Options
Expand the microphone's device compatibility with Rode accessories such as the SC4 and VXLR (both available separately). The SC4 is a short cable that lets you connect the VideoMic directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR adapter is the ideal solution when you want to record the VideoMic to a camcorder or mixer that has XLR inputs. | The Rode NT45-O omnidirectional microphone capsule is found on the Rode NT4, NT5, NT6 and NT55 microphones. The removable capsule features an omnidirectional polar pattern for a generous pick up area at the front and off-axis sections of the microphone. This capsule replaces lost or damaged capsules. | The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.Live condenser vocal microphone
Feedback rejecting supercardioid pick up pattern
Locking on/off switch
Heavy duty metal body
High level of RF rejection
Low handling noise
Designed and manufactured in Australia
Ten year warranty. | The NT4 X/Y Stereo Condenser Microphone from Rode combines an acoustically matched pair of 1/2" cardioid condenser capsules fixed in a perfect 90 ? near-coincident alignment. It can be used for drum overheads, percussion, choir vocals, environmental recording, and sound design in a studio or in the field.The NT4's versatility is extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm mini-jack cables are supplied to ensure the NT4 is ready to record to a mixing console, portable recorder, or camera. Also included is an RC4 rugged microphone case, a WS4 pop filter/wind shield, and a durable RM3 microphone clip.
X/Y Stereo Elements
The NT4 features dual cardioid elements mounted in an X/Y stereo configuration. The X/Y configuration results in accurate representation of signal within the "Left/Right" stereo field.
Matched Capsules
Both cardioid capsules are matched in sensitivity and frequency response for optimum results.
Phantom or Battery Powered
The NT4 can be powered via Phantom Power or a standard alkaline 9V battery.
Flexible Connectivity
The NT4 includes a dual XLR cable and a stereo 1/8" mini-jack output cable making the it ready for use in any recording environment. | The lightning connector version of the R? DE iXY Stereo Microphone is designed for portable audio recording applications using a Lightning connector iOS device (e.g. iPhone 5/s/c). It can be used for recording music, interviews, sound design, film-making, and more. The device features a metal housing to help reduce electromagnetic interference around two condenser microphone elements positioned in an XY configuration and an integrated iClamp for securing the microphone to your mobile device. The unit can records at up to 24-bit 96 kHz resolution using the R? DE Rec App, available from the Apple iTunes App store. A 72 Hz high pass filter can be engaged in software to reduce unwanted low frequency noise.
XY Pair Microphone Pattern
Provides stereo audio pickup pattern with realistic spatial imaging
Metal Housing
Protects device physically and helps reduce electromagnetic interference
Software 72 Hz High Pass Filter
Reduces unwanted low frequency noise
iClamp
Secures iXY to mobile device
Foam Windshield
Helps reduce wind noise from being picked up by the microphones
Zippered Carrying Case
Protects condenser elements from dust when not in use. | The NT1000 1" Studio Condenser Microphone from Rode features transformerless circuitry, giving the mic an ultra-low self-noise level of 6 dBA. It can be used to capture audio for both vocal and instrument applications and is well-suited for grand piano and drum overheads. It is built with a 3-pin XLR connector and requires 24 or 48V phantom power to operate. Also included is a RM2 ring-mount microphone stand and a ZP1 padded zip pouch.
Cardioid Polar Pattern
The cardioid pick-up pattern is effective in minimizing noise from off-axis sections of the microphone such as monitors, instruments, room ambiance, etc.
Gold-Plated Diaphragm
The gold-plated diaphragm provides transparent signal reproduction and frequency response. The diaphragm is internally shockmounted, providing protection against potential damage.
Wide Frequency Response
The NT1000's 20 Hz to 20 kHz frequency response allows the microphone to be used in a variety of applications. |
