| Content | The TX-XLR from Rode is a wireless XLR transmitter for the RodeLink digital wireless system (available separately). It can be used to provide one-touch sync with your wireless system, is capable of supplying 48V of phantom power for microphones through its XLR input, and plug-in power through its TRS input.The TX-XLR sports an OLED panel, as well as an XLR input with a locking collar and a 3.5mm TRS locking input jack. This allows you to use various input configurations; though the TX-XLR can switch between its XLR and TRS inputs, you cannot use both at the same time. Whichever input you choose, you can power the unit with two AA batteries, a Sony NP-F battery, or even continuously via a micro-USB connection. While the unit will run up 7 hours, please note that activating phantom power will reduce the usable running time, depending on the power source you're using. The unit comes with a built-in internal antenna.Note: Each RODELink system creates a wireless peer-to-peer connection allowing the transmitter and the receiver to operate as a pair. This means that the transmitter can transmit audio to only one receiver at a time. Conversely, the receiver can only receive audio from one transmitter at a time. | The Rode M1 is a handheld cardioid dynamic microphone designed for reliable reproduction of vocals, speech, guitars, and drums in concert venues, houses of worship, and live stage applications. Its dynamic element utilizes a neodymium magnet for high output without excessive preamp gain and delivers a frequency response of 75 Hz to 18 kHz. The resulting tone is smooth and defined with a mild bump at 200 Hz and a gentle rise from 4 to 10 kHz.The cardioid polar pattern excels at rejecting sound at its off-axis points, yielding enhanced immunity to feedback. The balanced, low-impedance output and low handling noise maintain signal integrity, and the durable, all-metal construction delivers tour-worthy toughness. The M1's gold-plated XLR 3-pin output ensures high conductivity and compatibility with most microphone preamps. It ships with a microphone clip and a padded zip pouch.All-metal construction designed to handle touringCardioid polar pattern minimizes off-axis noise and feedback Dynamic capsule maximizes headroom Gold-plated XLR 3-pin connector resists tarnish and maximizes conductivityDesigned and manufactured in Australia. | The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.Live condenser vocal microphone
Feedback rejecting supercardioid pick up pattern
Locking on/off switch
Heavy duty metal body
High level of RF rejection
Low handling noise
Designed and manufactured in Australia
Ten year warranty. | The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 0.5" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.
Battery or Phantom-Powered Condenser
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
Cardioid Polar Pattern
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
-10 dB and -20 dB Pad Switch
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
High-Pass Filter
A high-pass filter switch eliminates noise and hum at the lower frequency range. | Each of this matched pair of M5 Compact 1/2" Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response. This permanently polarized condenser mic can be used in several environments including stage, theater, studio, and home applications. It is well-suited for instruments, choirs, or anywhere you would employ a small-diaphragm condenser microphone.The matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones. The M5 is finished with Rode's ceramic coating, which offers a sleek matte-black finish. WS5 windshields and RM5 stand mounts are included.This matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones, Ceramic coating with matte-black finish1/2" capsule with gold-plated membrane, Cardioid polar pattern, All-metal body, Ultra-low noise. | The NT4 X/Y Stereo Condenser Microphone from Rode combines an acoustically matched pair of 1/2" cardioid condenser capsules fixed in a perfect 90 ? near-coincident alignment. It can be used for drum overheads, percussion, choir vocals, environmental recording, and sound design in a studio or in the field.The NT4's versatility is extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm mini-jack cables are supplied to ensure the NT4 is ready to record to a mixing console, portable recorder, or camera. Also included is an RC4 rugged microphone case, a WS4 pop filter/wind shield, and a durable RM3 microphone clip.
X/Y Stereo Elements
The NT4 features dual cardioid elements mounted in an X/Y stereo configuration. The X/Y configuration results in accurate representation of signal within the "Left/Right" stereo field.
Matched Capsules
Both cardioid capsules are matched in sensitivity and frequency response for optimum results.
Phantom or Battery Powered
The NT4 can be powered via Phantom Power or a standard alkaline 9V battery.
Flexible Connectivity
The NT4 includes a dual XLR cable and a stereo 1/8" mini-jack output cable making the it ready for use in any recording environment. |
