Description | Key features- Mounts Ball head to 5/8" or 1 1/8" Stud
| Key features- 40" Main Section
- Detachable Turtle Base
- Two Risers
- 40" Arm and Grip Head
| Key featuresCutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. | Key features- Opens up to a Black 40 x 80" Flag
- Fits Most "Wagons" or SUVs
- Hinged to Block Overhead Light
- Hollow Steel Frame, Solid Steel Mount
| Key features- Holds Laptop up to 10.5 x 16.5"
- Lightweight: 1.8 lb
- Air Slots
- 5/8" Adapter Included
| Key features- 20" Main Riser
- 2 Risers
- Sliding Leg
- 20" Arm with Grip Head
|
Content | Matthews has created the handy Baby Ball Head Adapter to allow you to mount any ball head with a threaded 3/8" tap to any piece of baby 5/8" or junior 1 1/8" hardware such as light stands or clamps with studs. The adapter is made of strong 6061 T-6 aluminum and features a large ergonomic handle. | This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" three-section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip head, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set.
Matthews Century C+ Stand with Removable Turtle Base (10.5')
The Century C+ Stand with Removable Turtle Base from Matthews features a 40" main riser with a removable turtle base. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set.Removable turtle base eases storage and transport
Matthews Hollywood Gobo Arm - 40"
This 40" Hollywood Gobo Arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. Plates feature two holes 3/8 and 5/8", eliminating confusion. Castings offer positive lock in all directions.
Matthews Hollywood Grip Head - 2-1/2"
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions. | Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original sizeNewly designed 90 ? Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. | The 4 x 4' line of Matthews silks, scrims, and flags have always been a popular item but just a tad large for travel? hence the birth of the 40 x 40" FloppyTop Hinge. The larger 48 x 48" size requires a van or grip truck for traveling, whereas shaving 8" on all sides makes it more manageable in tight spaces and allows it to fit in nearly all "wagons" or SUVs.Simply undo the touch fasteners at the corners, and the Top Hinge Floppy "flops" opens to become a large 40 x 80" black flag that creates a sort of open-sided tent to shade talent, the camera, etc. The frame is hollow steel tubing to cut down on weight, while the solid steel mounting rod can stand up to years of heavy use. | The Digital Imaging Technician Kit from Matthews is a lightweight (1.8 lb) tray that can hold a laptop which falls within the dimensions 10.5 x 16.5". It has slots to increase airflow and reduce overheating. A 3/8"-16 threaded mounting hole on the bottom of the tray allows it to be mounted to tripods or other supports with a 3/8"-16 stud. A 5/8" adapter is included so you can mount the tray to light stands as well. Also included is a case to protect your tray during transport. | This is a Matthews Hollywood Century "C" Stand with 20" main section, 2 risers and sliding leg base. It includes a 20" arm and grip head. When the stand and arm are extended, the top height is 5.25' (1.6 m).The unique staggered leg design of a C Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable for greatest positioning possibilities.This stand/arm combo is also available with a removable "Turtle" base. Order # 756120.The spring-loaded independent leg adjustment levels the load on uneven terrain.Arm and grip head may be used for small fixtures, or positioning of gobos |