| Description | SmallRig L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253Key Features:
Form-fitted L bracket for Fujifilm X-T3 and also X-T2 Camera body.
Arca-Type compatible dovetail plate with center marks on both axis.
Comes with a wooden handgrip to makes it ergonomic to hold the camera.
Extendable side plate allows for tethering or also cable release.
Features multiple 1/4? -20 threaded holes for accessory attachment.
Built-in flat screw driver on the bottom;SmallRig ?L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253 ?is a modular design with anti-twist flanges to keep the camera from twisting and also comes with a wooden handgrip to makes it ergonomic to hold the camera.Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. It features a sensor centering line on each axis to align the camera on a tripod head. The L bracket maintains complete access to the camera's battery and also ports.The side plate can extend to left if more room is needed for tethering or cable release. An include flat screw driver at the bottom is used to tighten and adjust the L-bracket. Additionally, it comes with a hand strap loop on both sides.Furthermore, 1/4"-20 mounting holes are locate on the side and bottom for accessory attachment. Optional ?Cold Shoe mount 1593 ? allows to mount microphone mount on the side plate. | Key Features- Shoulder Mount for DSLR & Small Cameras
- Universal Shoulder Pad
- Standard LWS 15mm Rod Block
- Universal Baseplate with 15mm Rod Clamp
Use a pro-style shoulder mount for your handheld shots with this ?Advanced Universal Shoulder Mount Kit ?from ?SmallRig. The universal mount is designed to stabilize your camera and minimize rotation when shooting video with your small camera or DSLR. | Key Features- Arca-Type Compatible Clamp for Gimbals
- Installs via Two 1/4"-20 Screws
- Index Markings on Both Sides of Clamp
- Vertical or Horizontal Installation
| Key Features:
1.Universal 15mm LWS Rod Mount Lens Support
2.6mm Horizontal Adjustment, 22mm Vertical Adjustment
3.One Piece Anti-off designed 1/4"-20 Threaded Support Rod
4.Includes Universal Y-Bracket
5.Allows to Quick Attachment/Detachment without Removing Other Rod-Mount AccessoriesSmallRig 15mm LWS Universal Lens Support 2152 is designed to remove the weight stress from camera's lens mount. It is compatible with any standard 15mm rods system and allows to adjust 6mm Horizontal and 22mm Vertical.The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support. The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories. It features a hole to for a hex spanner as a second secure point.Compatibility:
Universal | Key Features- Pair of 15mm Rods
- Lightweight Carbon Fiber Construction
This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 12" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. | Key Features- Lightweight, Black Aluminum Alloy
- Extendable via Integrated 12mm Threads
- For Camera Accessory Mounting
Lightweight yet durable, this pair of 6" black ?15mm Aluminum Rods ?from ?SmallRig ?is designed for mounting accessories on your camera rig. |
| Content | SmallRig L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253Key Features:- Form-fitted L bracket for Fujifilm X-T3 and X-T2 Camera body.
- Arca-Type compatible dovetail plate with center marks on both axis.
- Comes with a wooden handgrip to makes it ergonomic to hold the camera.
- Extendable side plate allows for tethering or cable release.
- Features multiple 1/4? -20 threaded holes for accessory attachment.
- Built-in flat screw driver on the bottom;
SmallRig ?L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253 ?is a modular design with anti-twist flanges to keep the camera from twisting and comes with a wooden handgrip to makes it ergonomic to hold the camera.Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. It features a sensor centering line on each axis to align the camera on a tripod head. The L bracket maintains complete access to the camera's battery and ports.The side plate can be extend to left if more room is needed for tethering or cable release. An included flat screw driver at the bottom is used to tighten and adjust the L-bracket. Additionally, it comes with a hand strap loop on both sides.SmallRig L-Bracket 2253 for Fujifilm X-T3 and X-T2 Camera: Precision design for easy access to ports and enhanced stability. Elevate your Fujifilm shooting experience! | Use a pro-style shoulder mount for your handheld shots with this ?Advanced Universal Shoulder Mount Kit ?from ?SmallRig. The universal mount is designed to stabilize your camera and minimize rotation when shooting video with your small camera or DSLR. It includes a universal baseplate with 15mm rod clamp, two 12"-long 15mm rods, a shoulder pad, and a dual handgrip kit.This durable camera support rig will improve the quality of your video shots and its soft shoulder pad will provide comfort for long shooting days. It includes a universal baseplate, an Arca-type quick release camera plate, and a 15mm rod clamp that together help support your small camera.Which can easily convert to a tripod setup if needed. The dual handgrip kit assists with balance and comfort using its two adjustable rubber handgrips. The 15mm LWS universal rod system allows you to customize your rig with accessories such as lights, monitors, microphones, wireless gear, or a follow focus.SmallRig Universal Baseplate with 15mm LWS Rod Support
The ?Universal Baseplate with 15mm LWS Rod Clamp ?from ?SmallRig ?provides 15mm rod-based accessory support for your mirrorless or DSLR camera. This baseplate features both 1/4"-20 and 3/8"-16 bottom mounting threads and an Arca-type quick release plate with soft pads on top to secure and protect your camera.Two vertical rods allow for fine vertical adjustment, enabling optimal positioning of your camera accessories, such as a lens support. The integrated 15mm rod clamp allows you to mount the baseplate on a standard 15mm LWS rod system, and it tightens using thumbscrew levers.Alternatively, you can mount the baseplate on a tripod plate or cage using the bottom threads. See below for the list of cameras that are recommended by the manufacturer for use with this baseplate.>Compatibility
Including but not limited to:- Olympus E-M1 Mark II
- Nikon Z7, Z6
- Fujifilm X-H1, X-T1, X-T2, X-T20
- Canon 5D Mark IV, M50, M5, M3, M6, EOS R, EOS RP
- Panasonic GH3, GH4, GH5, G80, GX85, G7, G85, G9
- Sony a6000, a6300, a6400, a6500, a7, a7 II, a7S II, a7s III, a7R II, a9, a7 III, a7R III
SmallRig 2057 Universal Shoulder Pad
Lightweight and designed with a contoured form, the ? 2057 Universal Shoulder Pad ?from ?SmallRig ?enables you to comfortably shoulder-mount your camera rig. The pad's multiple 1/4"-20, 3/8"-16, and M4 threads, as well as several. ARRI-style anti-twist threads, enable you to mount it on almost any camera or baseplate.This unit's removable foam pad connects to its aluminum alloy base using the four included M4 screws. Mount the 2057 Universal Shoulder Pad directly on your camera or use it. With a separately available rod bracket, rods, and also handgrips.SmallRig 942 Super Lightweight 15mm LWS Rod Bracket v3
Use the ?942 Super Lightweight 15mm LWS Rod Bracket v3 ? From ?SmallRig ?to mount a battery plate, camera cage, shoulder pad, or also other component on your 15mm LWS rods.This aluminum rod bracket features multiple 1/4"-20 threads and also thumb-lever rod locks. An Allen wrench and also screws are include with the bracket.SmallRig 15mm Aluminum Rod (Pair, Black, 12")
Lightweight yet durable, this pair of 12" black ?15mm Aluminum Rods ? From ?SmallRig ?is design for mounting accessories on your camera rig.Integrated 12mm threads on each end enable you to lengthen the rods using separately available extensions. | This sturdy aluminum ?SmallRig Arca-Type Quick Release Clamp ?is designed to lock a camera with an Arca-type L-bracket or Arca-type plate onto the DJI Ronin-S/-SC gimbal. It installs on your gimbal in either vertical or horizontal position and secures an Arca-type plate by tightening a knurled thumbscrew.Index markings on both sides of the clamp make it easy and fast to rebalance when removing and reinstalling your camera on the gimbal. The M4 threaded accessory holes are for mounting a Ronin-S or Ronin-SC follow focus motor. It can also serve as a riser plate when using a large-diameter lens.Optimize your gimbal setup with SmallRig's Arca-Type Quick Release Clamp (DBC2506). Designed for DJI Ronin S/SC, ZHIYUN Crane Series, and also Weebill S Gimbals. This clamp streamlines your workflow with seamless Arca-Swiss compatibility.The precision-engineered design ensures secure mounting and also quick release. Allowing for efficient transitions between setups. Crafted for durability with high-quality materials, it provides a reliable foundation for your gear.Simplify your rigging process and enhance the versatility of your gimbal system with. SmallRig's Arca-Type Quick Release Clamp—an essential accessory for filmmakers. And also content creators who value precision and efficiency in their equipment. Compatibility- DJI Ronin-S
- DJI Ronin-SC
- Zhiyun CRANE-2
- Zhiyun CRANE-3
- Zhiyun WEEBILL LAB
- Zhiyun WEEBILL-S
- Moza Air 2
| SmallRig 15mm LWS Universal Lens Support 2152Key Features:- Universal 15mm LWS Rod Mount Lens Support
- 6mm Horizontal Adjustment, also 22mm Vertical Adjustment
- One Piece Anti-off design 1/4"-20 Threaded Support Rod
- Includes Universal Y-Bracket
- Allows to Quick Attachment/Detachment without Removing Other Rod-Mount Accessories
SmallRig 15mm LWS Universal Lens Support 2152 is design to remove the weight stress from camera's lens mount. It is compatible with any standard 15mm rods system.And also allows to adjust 6mm Horizontal and also 22mm Vertical. The lens support is one piece anti-off design 1/4"-20 thread rod and also includes a Y-bracket support.The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories. It features a hole to for a hex spanner as a second secure point.Compatibility:
Universal | This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 12" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. | Lightweight yet durable, this pair of 6" black ?15mm Aluminum Rods ?from ?SmallRig ?is designed for mounting accessories on your camera rig. Integrated 12mm threads on each end enable you to lengthen the rods using separately available extensions.Elevate your filmmaking setup with the SmallRig 15mm Black Aluminum Alloy Rods (M12-15cm). This set of two 6-inch rods, constructed from high-quality aluminum alloy, adds versatility to your rigging options. The M12-15cm size ensures compatibility with a wide range of accessories such as follow focuses, matte boxes, and lens supports.These rods are lightweight yet durable, providing essential support without adding unnecessary bulk to your equipment. The precisely machined threads and also standardized 15mm diameter ensure a secure connection. Allowing you to build a reliable and also customized rig for your specific needs.Whether you're a professional filmmaker or also passionate enthusiast. SmallRig's Aluminum Alloy Rods are a must-have for achieving stability and flexibility in your video production endeavors. Upgrade your rig and also explore new creative possibilities with these high-performance, 6-inch black aluminum rods from SmallRig. |
