Content | This ?15mm Carbon Fiber Rod Set ?from ?SmallRig ?lets you attach 15mm rod-mounted accessories to your rig. These carbon fiber rods are 4" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The carbon fiber construction keeps these rods lightweight, while allowing them to maintain the rigidity necessary for accessory support. | Add a quick release plate to your ? SmallRig Arca-Type Quick Release Plate ?camera cage with this ?Arca-Type Quick Release Plate. The lightweight aluminum plate attaches to the bottom of the cage with the two included 1/4"-20 screws and can fit in a standard Arca-type base.The Plate has an open-middle design so you can access the camera mounting screw through the plate. This design allows the plate to stay attached to the cage, and you can easily unmount the camera from the cage to move it to a gimbal, tripod, or other mounts. The Plate features rubber pads to protect the cage and it has spring-loaded anti-slip pins to prevent twisting.The plate is currently compatible with the following SmallRig cages. Check with the manufacturer for compatibility if you don't see your model below.Note:
This is not compatible with SmallRig baseplate 2035 or 1934.CompatibilityNikon
Z7/Z6 Cage 2243Sony
a7 III, a7R III Series Cages 2087, 2176
a6 Series Cages 1661, 2310, 2082
a7 II, a7R II, a7S II Series Cages 1982, 1660
a7, a7S, a7R Cage 1815
a9 Cage 2013SmallRig Arca-Type Quick Release Plate
RX0 Cage 2106
RX0 II Cage 2344
RX100 M5, M5A, M4, M3 Cage 2105
RX100 VI 2225Blackmagic Design
BMPCC 6K and 4K Cages 2203, 2254
BMPCC Cage 2012 SmallRig Arca-Type Quick Release PlateFujifilm
X-T2 Cage 1881
X-T3 Cage 2229
X-H1 Cage 2123, 2124Panasonic
GH5, GH5S Cage 2049
GH4 Cage 1585
GX85, GX80, GX7II Cage 1828 SmallRig Arca-Type Quick Release Plate
G85, G80 Cage 1950
S1, S1R Cage 2345Canon
EOS 70D, 80D Cage 1789
1DX, 1DX Mark II Cage 2365Olympus
EM1II Cage 2086GoPro
HERO 7, 6, 5 Cage 2320 | SmallRig 7 inch Articulating Arm 2065Key Features:- It is equipped with 1/4? ? screws on both ends respectively.
- It could attach monitor via the 1/4? ? screw on the one end and also attach accessories with 1/4? ? -20 threaded holes on the other end.
- Mounted with 1/4? ? screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
- It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.
It is equip with 1/4? ? screws on both ends respectively. Thus, it could attach monitor via the 1/4? ? screw on the one end and also attach accessories with 1/4?. ? -20 threaded holes on the other end, like cage ?NATO Rail 1973, ?15mm Rod 1182 ?and ?Quick Release Rod Clamp 1976 ?etc. Mounted with 1/4? ? Screw is a rubber cushion which could prevent the scratches of monitor and also help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.Compatibility:
Universal | Use a pro-style shoulder mount for your handheld shots with this ?Advanced Universal Shoulder Mount Kit ?from ?SmallRig. The universal mount is designed to stabilize your camera and minimize rotation when shooting video with your small camera or DSLR. It includes a universal baseplate with 15mm rod clamp, two 12"-long 15mm rods, a shoulder pad, and a dual handgrip kit.This durable camera support rig will improve the quality of your video shots and its soft shoulder pad will provide comfort for long shooting days. It includes a universal baseplate, an Arca-type quick release camera plate, and a 15mm rod clamp that together help support your small camera.Which can easily convert to a tripod setup if needed. The dual handgrip kit assists with balance and comfort using its two adjustable rubber handgrips. The 15mm LWS universal rod system allows you to customize your rig with accessories such as lights, monitors, microphones, wireless gear, or a follow focus.SmallRig Universal Baseplate with 15mm LWS Rod Support
The ?Universal Baseplate with 15mm LWS Rod Clamp ?from ?SmallRig ?provides 15mm rod-based accessory support for your mirrorless or DSLR camera. This baseplate features both 1/4"-20 and 3/8"-16 bottom mounting threads and an Arca-type quick release plate with soft pads on top to secure and protect your camera.Two vertical rods allow for fine vertical adjustment, enabling optimal positioning of your camera accessories, such as a lens support. The integrated 15mm rod clamp allows you to mount the baseplate on a standard 15mm LWS rod system, and it tightens using thumbscrew levers.Alternatively, you can mount the baseplate on a tripod plate or cage using the bottom threads. See below for the list of cameras that are recommended by the manufacturer for use with this baseplate.>Compatibility
Including but not limited to:- Olympus E-M1 Mark II
- Nikon Z7, Z6
- Fujifilm X-H1, X-T1, X-T2, X-T20
- Canon 5D Mark IV, M50, M5, M3, M6, EOS R, EOS RP
- Panasonic GH3, GH4, GH5, G80, GX85, G7, G85, G9
- Sony a6000, a6300, a6400, a6500, a7, a7 II, a7S II, a7s III, a7R II, a9, a7 III, a7R III
SmallRig 2057 Universal Shoulder Pad
Lightweight and designed with a contoured form, the ? 2057 Universal Shoulder Pad ?from ?SmallRig ?enables you to comfortably shoulder-mount your camera rig. The pad's multiple 1/4"-20, 3/8"-16, and M4 threads, as well as several. ARRI-style anti-twist threads, enable you to mount it on almost any camera or baseplate.This unit's removable foam pad connects to its aluminum alloy base using the four included M4 screws. Mount the 2057 Universal Shoulder Pad directly on your camera or use it. With a separately available rod bracket, rods, and also handgrips.SmallRig 942 Super Lightweight 15mm LWS Rod Bracket v3
Use the ?942 Super Lightweight 15mm LWS Rod Bracket v3 ? From ?SmallRig ?to mount a battery plate, camera cage, shoulder pad, or also other component on your 15mm LWS rods.This aluminum rod bracket features multiple 1/4"-20 threads and also thumb-lever rod locks. An Allen wrench and also screws are include with the bracket.SmallRig 15mm Aluminum Rod (Pair, Black, 12")
Lightweight yet durable, this pair of 12" black ?15mm Aluminum Rods ? From ?SmallRig ?is design for mounting accessories on your camera rig.Integrated 12mm threads on each end enable you to lengthen the rods using separately available extensions. | The ?SmallRig Arca QR Half Cage ?provides accessory mounting and quick release convenience for your Sony a7R III, a7 III, a7 II, a7R II, or a7S II mirrorless camera. The built-in Arca-type compatible camera mount allows you to quickly mount and unmount your camera between rigs.Elevate your Sony A7 series camera with SmallRig's Arca QR Half Cage 2238. Crafted for A7R III/A7 III/A7 II/A7R II/A7S II, it ensures a secure fit, while its robust build provides durability. The cage features Arca Swiss QR plate compatibility, allowing seamless transitions between your cage and other accessories.With multiple 1/4"-20 and 3/8"-16 threaded holes, it offers extensive mounting options for accessories like monitors and also microphones. The half cage design maintains easy access to camera controls. SmallRig's attention to detail makes this cage a reliable choice for filmmakers, enhancing your shooting experience with stability and also adaptability.
Accessory SmallRig Arca QR Half Cage mounting options include a NATO rail, 1/4"-20 and 3/8"-16 threads, and also ARRI-style mounting threads to add a handle, arm extension, monitor, microphone, light, or another accessory. This formfitting half cage maintains access to the camera's controls and ports.CompatibilitySony a7R III, a7 III, a7 II, a7R II, and also a7S II cameras | This sturdy aluminum ?SmallRig Arca-Type Quick Release Clamp ?is designed to lock a camera with an Arca-type L-bracket or Arca-type plate onto the DJI Ronin-S/-SC gimbal. It installs on your gimbal in either vertical or horizontal position and secures an Arca-type plate by tightening a knurled thumbscrew.Index markings on both sides of the clamp make it easy and fast to rebalance when removing and reinstalling your camera on the gimbal. The M4 threaded accessory holes are for mounting a Ronin-S or Ronin-SC follow focus motor. It can also serve as a riser plate when using a large-diameter lens.Optimize your gimbal setup with SmallRig's Arca-Type Quick Release Clamp (DBC2506). Designed for DJI Ronin S/SC, ZHIYUN Crane Series, and also Weebill S Gimbals. This clamp streamlines your workflow with seamless Arca-Swiss compatibility.The precision-engineered design ensures secure mounting and also quick release. Allowing for efficient transitions between setups. Crafted for durability with high-quality materials, it provides a reliable foundation for your gear.Simplify your rigging process and enhance the versatility of your gimbal system with. SmallRig's Arca-Type Quick Release Clamp—an essential accessory for filmmakers. And also content creators who value precision and efficiency in their equipment. Compatibility- DJI Ronin-S
- DJI Ronin-SC
- Zhiyun CRANE-2
- Zhiyun CRANE-3
- Zhiyun WEEBILL LAB
- Zhiyun WEEBILL-S
- Moza Air 2
|