| Content | Control your ARRI ALEXA Mini, Mini LF, or AMIRA camera with your SmallHD Cine 7 monitor using this Cine 7 Monitor Camera Control Kit. The kit includes a software license that provides full control via CAP (Camera Access Protocol) over your camera, a 3' locking 10-pin to Ethernet camera control cable, a 2' SDI cable, and a standard Ethernet cable. Also included is a neoprene sleeve to store your cable set.Read below for the supported camera controls available with the software kit, all available via the Cine 7 touchscreen.
Compatibility
SmallHD Cine 7 monitor
ARRI ALEXA Mini, ALEXA Mini LF, and AMIRA cameras
Supported Camera Controls- Record Start
- Record Stop
- Playback Control
- Set and Read TC
- Set and Read Project Rate
- Read and Set System Date/Time
- Read Clip List from Medium
- Camera Type
- Camera Serial
- Camera State
- Look File Name
- Color Temperature
- Tint Variable
- Exposure Index
- Sensor FPS List
- Sensor FPS
- Shutter Angle List
- Shutter Angle
- Exposure Time List
- Exposure Time
- Exposure Index List
- ND Filter List
- ND Filter
- White Balance List
- Media Status
- Recording Mode
- Clip Scene
- Clip Take
- Medium Type
- Model Name
- Serial Number
- Clip Count
- Current Reel
- Medium Size
- Medium Status
- Write Protection
- Clip Count
- Current Reel
- Free Capacity
- Clip File Name
- Clip UUID
- Clip Project Rate
- Clip Start TC
- Clip Duration TC
| The lightweight 7" SmallHD Cine 7 On-Camera 500 TX Monitor provides professional monitoring in a sharp 7" display suitable for outdoor use. The Cine 7 supports up to UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.The Cine 7 features a bright 1800 cd/m ?, 322 ppi, 1920 x 1200 IPS LCD touchscreen with 3D LUT compatibility. The 500 TX features a built-in 5 GHz wireless transmitter that is compatible with Bolt 500 receivers and can send Full HD video signals up to 500' away to a secondary director or client monitor. The 500 TX also features lightweight handles so you can move freely around the set.Using the intuitive Swipe OS3 you can turn on and save pages of various monitoring tools and focusing aids with a finger tap. An L-series battery plate and a D-Tap power cable are also included with the monitor.
Features
Daylight-viewable, 7" touchscreen on-camera monitor with 1800 cd/m ? brightnessSlim, lightweight design with 10-bit, touchscreen IPS LCD panelFeatures built-in wireless transmitter which is compatible with Bolt 500 receivers and can send video up to 500' awaySupports up to 1080p60 video via full-size HDMI and 3G-SDI inputsHDMI-to-SDI and SDI-to-HDMI cross conversion is supportedUses SmallHD Swipe OS3 to organize and save customized function and settings pagesPower with the L-series battery plateFour 1/4"-20 mounting points on top, left, right, and back
Software- Pixel zoom: 1.1 to 2x and 2 to 8x via swipe up/down, with pinch zoom
- DSLR scale: Canon 5D Mk II and Canon 7D
- Custom scale: Underscan only
- Anamorphic de-squeeze: 0.75x, 1.33x, 1.5x, 2.0x, 2.5x
- Image flip: Auto and manual
- Image rotation: Auto and manual
- Color focus assist: Adjustable style and intensity
- Peaking: Adjustable intensity
- False color: Spectrum, ARRI-style, and customizable
- Dual-zebra: Customizable
- Waveform: Luma and RGB, customizable with region of interest highlighting
- Vectorscope: Yes
- RGB parade: Customizable
- Histogram: Luma and RGB
- Image capture: With dedicated button and image gallery
- Custom LUTs: Load as looks on pages or as system-wide calibration via the settings menu
- LUT import: Via SD card or USB storage device
- Image overlay: Opacity slider and blink setting
- Audio meters: HDMI and SDI up to 8 channels
| The V-Mount 14V/26V Dual Battery Bracket from SmallHD is designed to power your SmallHD 4K monitor using one or two 14 or 26V batteries. This battery plate features a direct, cable-free plug-in design and easy mounting on the monitor's Arca-Swiss SmartRail.The bracket's dual design enables hot-swapping between two batteries as well as the monitor's 3-pin XLR power port. When used with select batteries, the bracket will pass battery data to your monitor.
Compatibility
SmallHD 4K monitors
Features
Supports both 14V and 26V batteriesEnables hot-swappingDirect plug-in design |
>SmallHD FOCUS Bolt 500 ?OverviewThe ?FOCUS Bolt 500 TX Monitor & RX Monitor Kit ?from ?B&H Photo ?provides a complete wireless system for monitoring up to 1080p video. This kit includes one Bolt 500 TX 5" monitor with a built-in transmitter, one Bolt 500 RX 5" monitor with a built-in receiver, two L-series type batteries, two chargers, HDMI cables, antennas, a tilt arm for the transmitter monitor, and a neck strap and handgrips for the receiver monitor.SmallHD FOCUS Bolt 500 RX Wireless MonitorThe ?SmallHD FOCUS Bolt 500 RX Wireless Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless receiver, all in a single unit. Using the built-in receiver, the Focus Bolt can receive uncompressed 10-bit 4:2:2 HD video from a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT transmitters, or a SmallHD FOCUS Bolt 500 TX, from up to 500' away, line-of-sight. Comfortable rubberized handgrips are included along with a neck strap, so you can comfortably hold onto the monitor as you roam around the set. An L-series battery kit for powering the monitor, cable clips, matte and glossy screen protectors, a cleaning cloth, and a micro-HDMI to HDMI adapter are included as well.Display-wise, the FOCUS Bolt 500 RX is based off the same display and I/O as the well-regarded standard FOCUS models. The 800 cd/m ? bright touchscreen 1280 x 720 IPS LCD panel can be viewed in daylight and can be driven by either the single micro-HDMI input or the wireless input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. The wireless input only supports up to HD resolutions. At the rear of the monitor, a single NP-F battery bay accepts the included L-series battery for power.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.SmallHD FOCUS Bolt 500 TX On-Camera MonitorThe ?SmallHD FOCUS Bolt 500 TX On-Camera Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless transmitter, all in a single unit. Using the built-in transmission, the Focus Bolt can send uncompressed 10-bit 4:2:2 HD video to a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT, or Sidekick II receiver, or to a SmallHD FOCUS Bolt 500 RX or 703 Bolt monitor, up to 500' away. What's more is this monitor fits right atop your camera's accessory shoe using the included tilt-arm. An L-series battery kit, cable clips, matte and glossy screen protectors, a cleaning cloth, and an assortment of HDMI cables are included as well.Display-wise, the FOCUS Bolt 500 TX is based off the same display and I/O as the well-regarded standard FOCUS models. The bright, 800 cd/m2, 1280 x 720 touchscreen IPS LCD panel can be viewed in daylight, and is driven by a single micro-HDMI input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. At the rear of the monitor, a single NP-F battery bay accepts the included available L-series battery for power, while an integrated power output can also power your camera with a separately available DC coupler.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.Camera Setup IntegrationThis monitor complements smaller cameras by providing power output and a headphone jack. The power output lets you power your camera directly from the NP-F battery mounted on the monitor, increasing runtimes over the standard batteries of many mirrorless cameras. If your camera doesn't have a headphone jack, the FOCUS de-embeds the audio from the HDMI stream for real-time feedback of audio.Convenient MountingThe FOCUS monitor secures to your camera using the included FOCUS Tilt Arm via shoe mount or 1/4"-20 thread. The Tilt Arm enables 180 ? of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, or LED light) that would otherwise be displaced from the camera's accessory shoe. | Add a professional UHD 4K monitor to your studio with the Cine 24" 4K High Bright Pro Monitor from SmallHD. Featuring the updated SmallHD OS4.1, the monitor provides a crisp image with 10-bit DCI-P3 color intelligence, 1350 cd/m ? brightness, and a 1000:1 contrast ratio.The monitor features four 12G/6G/3G/HD-SDI inputs and four 12G/6G/3G/HD-SDI outputs, as well as one HDMI 2.0 input and one HDMI 2.0 output. All functionality of the monitor is accessed via the innovative Page Builder in OS4.1 that features a fully redesigned UI, preconfigured pages, and page tabs. Other monitoring features include a calibration wizard, false color overlays, waveform, pixel zoom, focus assist, peaking, and improved function buttons. Additional functions with updates of OS4.1 will include dual and quad view and 4K waveforms and scopes with regions of interest.The monitor can be mounted using the 110mm VESA pattern on the back or by thirty-six 1/4"-20 threads around the top and sides of the monitor. You can power the monitor using a 3-pin XLR input or by a separately available dual V-mount or Gold mount battery plate, and they are hot-swappable. You can also power peripherals from the monitor using the two 2-pin LEMO-type outputs, the two USB Type-A outputs, or the one USB Type-C output.Data inputs and output can be performed using the SD card slot to load 3D LUTs, and the monitor also features an RJ45 Ethernet port and an RJ45 GPI port for additional data and configuration. There is a 3.5mm headphone output to monitor the embedded audio.The monitor includes numerous accessories such as an acrylic screen protector, a 3' long HDMI cable, two 1/4"-20 cheese-style accessory mounting sticks, two 1/4"-20 and 3/8"-16 cheese-style accessory mounting sticks, monitor feet, a monitor handle, a 3-pin XLR power supply, an 8GB SD card, and a microfiber cleaning cloth.
Key Features- 24" UHD 4K monitor
- 1000:1 contrast ratio
- 1350 cd/m ? brightness
- Four 12G/6G/3G/HD-SDI inputs and four 12G/6G/3G/HD-SDI outputs
- One HDMI 2.0 input and one HDMI 2.0 output
- SD card slot for 3D LUTs
- One RJ45 Ethernet port
- One RJ45 GPI port
- 110mm VESA mounting on the back
- Thirty-six 1/4"-20 mounting threads on top and sides
- Smartrail mounting options
- 1/4"-20 and 3/8"-16 cheese-style mounting sticks included
SmallHD OS4.1- Internal calibration wizard
- Color pipe color-space formatting
- Settings dashboard for easy access to common settings
- Preconfigured pages
- Page tabs
- Customizable false color overlays
- Customizable 4K waveform with region-of-interest highlighting
- Improved function buttons
- Pixel zoom, focus assist, peaking
- Total UI overhaul
Power Options- One 3-pin XLR 12 to 24V, 12A input
- Two 2-pin LEMO 12V, 2A outputs
- Two USB Type-A 5V, 2.4A outputs
- Two USB Type-C 5V, 1.5A outputs
- Separately available V-mount or Gold mount battery plates
- XLR and battery options are hot-swappable
| The lightweight 7" SmallHD Cine 7 On-Camera 500 SK RX Monitor with Handles provides professional monitoring in a sharp 7" display suitable for outdoor use. The Cine 7 supports up to UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.The Cine 7 features a bright 1800 cd/m ?, 322 ppi, 1920 x 1200 IPS LCD touchscreen with 3D LUT compatibility. The 500 SK RX features a built-in wireless receiver that is compatible with Bolt 500, 1000, and 3000 transmitters, and can receive Full HD video signals from up to 500' away. The 500 SK RX also features lightweight handles so you can move freely around the set.Using the intuitive Swipe OS3 you can turn on and save pages of various monitoring tools and focusing aids with a finger tap. At the rear of the monitor, a Gold mount battery mount enables you to power the unit. An L-series battery plate and an AC battery kit are also included with the monitor.
Features
Daylight-viewable, 7" touchscreen on-camera monitor with 1800 cd/m ? brightnessSlim, lightweight design with 10-bit, touchscreen IPS LCD panelFeatures built-in wireless receiver, which is compatible with Bolt 500, 1000, and 3000 transmitters and can receive video from up to 500' awayFeatures lightweight handles for mobility on setSupports up to 1080p60 video via full-size HDMI and 3G-SDI inputsHDMI to SDI and SDI to HDMI cross conversion is supportedUses SmallHD Swipe OS3 to organize and save customized function and settings pagesPower with the Gold mount battery plateFour 1/4"-20 mounting points on top, left, right, and back
Software- Pixel zoom: 1.1 to 2x and 2 to 8x via swipe up/down, with pinch zoom
- DSLR scale: Canon 5D Mk II and Canon 7D
- Custom scale: Underscan only
- Anamorphic de-squeeze: 0.75x, 1.33x, 1.5x, 2.0x, 2.5x
- Image flip: Auto and manual
- Image rotation: Auto and manual
- Color focus assist: Adjustable style and intensity
- Peaking: Adjustable intensity
- False color: Spectrum, ARRI-style, and customizable
- Dual-zebra: Customizable
- Waveform: Luma and RGB, customizable with region of interest highlighting
- Vectorscope: Yes
- RGB parade: Customizable
- Histogram: Luma and RGB
- Image capture: With dedicated button and image gallery
- Custom LUTs: Load as looks on pages or as system-wide calibration via the settings menu
- LUT import: Via SD card or USB storage device
- Image overlay: Opacity slider and blink setting
- Audio meters: HDMI and SDI up to 8 channels
|
