| Content | Control your ARRI ALEXA Mini, Mini LF, or AMIRA camera with your SmallHD Cine 7 monitor using this Cine 7 Monitor Camera Control Kit. The kit includes a software license that provides full control via CAP (Camera Access Protocol) over your camera, a 3' locking 10-pin to Ethernet camera control cable, a 2' SDI cable, and a standard Ethernet cable. Also included is a neoprene sleeve to store your cable set.Read below for the supported camera controls available with the software kit, all available via the Cine 7 touchscreen.
Compatibility
SmallHD Cine 7 monitor
ARRI ALEXA Mini, ALEXA Mini LF, and AMIRA cameras
Supported Camera Controls- Record Start
- Record Stop
- Playback Control
- Set and Read TC
- Set and Read Project Rate
- Read and Set System Date/Time
- Read Clip List from Medium
- Camera Type
- Camera Serial
- Camera State
- Look File Name
- Color Temperature
- Tint Variable
- Exposure Index
- Sensor FPS List
- Sensor FPS
- Shutter Angle List
- Shutter Angle
- Exposure Time List
- Exposure Time
- Exposure Index List
- ND Filter List
- ND Filter
- White Balance List
- Media Status
- Recording Mode
- Clip Scene
- Clip Take
- Medium Type
- Model Name
- Serial Number
- Clip Count
- Current Reel
- Medium Size
- Medium Status
- Write Protection
- Clip Count
- Current Reel
- Free Capacity
- Clip File Name
- Clip UUID
- Clip Project Rate
- Clip Start TC
- Clip Duration TC
| CES 2018: What is the SMALL HD 703 Bolt 3000-NIT Monitor?Monitor your camera's feed completely free of wires with the SmallHD 703 Bolt 7" Wireless Director's Monitor Bundle. This bundle adds a V-mount plate, side handles, and a neck strap to complement the monitor itself. Since the monitor can now operate on battery power from a separately available battery, with a compatible wireless connection, the 703 Bolt can be taken around the set fully untethered.Borrowing the wireless technology from Teradek, the 703 Bolt can receive uncompressed HD wireless signals from Bolt 500, 1000, or 3000 transmitters up to 300' away with no perceptible latency. With this feature, anyone can walk around the set while monitoring a camera feed, perfect for directors and camera assistants. Furthermore, despite the presence of a wireless receiver, the 703 Bolt maintains a slim profile similar to on-camera monitors.A unibody aluminum exterior keeps the monitor durable yet lightweight, while also acting as a heatsink for the internal electronics. The LCD panel itself is protected by a layer of optically-bonded Gorilla Glass, notable for its transparency and toughness. The optical bonding process ensures that blacks are not washed out and reduces the harshness of reflections.On the rear of the display is the SDI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory. All the functionality of the monitor is available via the PageBuilder OS, which provides advanced functionality with a simple and efficient graphical user interface.
PageBuilder OS
PageBuilder OS is an intuitive graphical user interface (GUI) that puts all the advanced functionality of the 703 Bolt at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, multiview, LUTs, and focusing aids on different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.
ColorFlow 3D LUT Processing
To keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Separate LUT-treated images can be sent downstream over SDI so you can have the 703 Bolt display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image capture function saves a still frame from the incoming video stream onto an SD card, and records the applied 3D LUT for post-production reference.
On-Set Problem Solving
PageBuilder OS has a dedicated "Output Preview" page which allows you to apply LUTs and other image adjustments specific to the output signal from the monitor. Whether you have your camera connected to the wireless or SDI inputs on the 703 Bolt, you are not limited by that connection; the 703 Bolt cross-converts to ensure compatibility with downstream hardware.
HD Scopes
Fill the screen with up to three simultaneous scopes, including waveform, vectorscope, and histogram, while still being able to observe the camera feed.
Exposure Tools
Exposure Assist supports both ARRI and Spectrum-based false color, with built-in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Customizable Focus Assist and Peaking Tools
As recording resolutions increase, so does the importance of focusing precision. With Focus Assist, you can highlight the areas that are in focus with a bright color. These highlights are easily visible on the fly for quick focus confirmation. Focus Peaking increases the sharpness of the image for a subtler focus confirmation without the need for bright outlines. The color and intensity of these tools are adjustable to fit your preference.
Versatile Frame Guides
Select standard markers and safety areas can be overlaid on the display as lines or matte overlays, with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9, and Custom (user-selectable). |
>SmallHD FOCUS Bolt 500 ?OverviewThe ?FOCUS Bolt 500 TX Monitor & RX Monitor Kit ?from ?B&H Photo ?provides a complete wireless system for monitoring up to 1080p video. This kit includes one Bolt 500 TX 5" monitor with a built-in transmitter, one Bolt 500 RX 5" monitor with a built-in receiver, two L-series type batteries, two chargers, HDMI cables, antennas, a tilt arm for the transmitter monitor, and a neck strap and handgrips for the receiver monitor.SmallHD FOCUS Bolt 500 RX Wireless MonitorThe ?SmallHD FOCUS Bolt 500 RX Wireless Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless receiver, all in a single unit. Using the built-in receiver, the Focus Bolt can receive uncompressed 10-bit 4:2:2 HD video from a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT transmitters, or a SmallHD FOCUS Bolt 500 TX, from up to 500' away, line-of-sight. Comfortable rubberized handgrips are included along with a neck strap, so you can comfortably hold onto the monitor as you roam around the set. An L-series battery kit for powering the monitor, cable clips, matte and glossy screen protectors, a cleaning cloth, and a micro-HDMI to HDMI adapter are included as well.Display-wise, the FOCUS Bolt 500 RX is based off the same display and I/O as the well-regarded standard FOCUS models. The 800 cd/m ? bright touchscreen 1280 x 720 IPS LCD panel can be viewed in daylight and can be driven by either the single micro-HDMI input or the wireless input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. The wireless input only supports up to HD resolutions. At the rear of the monitor, a single NP-F battery bay accepts the included L-series battery for power.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.SmallHD FOCUS Bolt 500 TX On-Camera MonitorThe ?SmallHD FOCUS Bolt 500 TX On-Camera Monitor ?combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless transmitter, all in a single unit. Using the built-in transmission, the Focus Bolt can send uncompressed 10-bit 4:2:2 HD video to a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT, or Sidekick II receiver, or to a SmallHD FOCUS Bolt 500 RX or 703 Bolt monitor, up to 500' away. What's more is this monitor fits right atop your camera's accessory shoe using the included tilt-arm. An L-series battery kit, cable clips, matte and glossy screen protectors, a cleaning cloth, and an assortment of HDMI cables are included as well.Display-wise, the FOCUS Bolt 500 TX is based off the same display and I/O as the well-regarded standard FOCUS models. The bright, 800 cd/m2, 1280 x 720 touchscreen IPS LCD panel can be viewed in daylight, and is driven by a single micro-HDMI input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. At the rear of the monitor, a single NP-F battery bay accepts the included available L-series battery for power, while an integrated power output can also power your camera with a separately available DC coupler.>Swipe OSBuilt on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease.Camera Setup IntegrationThis monitor complements smaller cameras by providing power output and a headphone jack. The power output lets you power your camera directly from the NP-F battery mounted on the monitor, increasing runtimes over the standard batteries of many mirrorless cameras. If your camera doesn't have a headphone jack, the FOCUS de-embeds the audio from the HDMI stream for real-time feedback of audio.Convenient MountingThe FOCUS monitor secures to your camera using the included FOCUS Tilt Arm via shoe mount or 1/4"-20 thread. The Tilt Arm enables 180 ? of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, or LED light) that would otherwise be displaced from the camera's accessory shoe. | Control your RED DSMC2 camera with your SmallHD Cine 7 monitor using this Cine 7 Monitor Camera Control Kit. The kit includes a software license that provides full control via RCP (RED Camera Protocol) over your camera, a 2' locking 2-pin to 4-pin camera control cable, a 2' SDI cable, and a USB to 2-Pin LEMO adapter that connects to the back of your monitor. Also included is a neoprene sleeve to store your cable set.The software allows you to access and control all camera functions that are available via RCP such as run/stop, color and exposure controls, status, color temperature, video format, playback, shutter, menu control, and more, all via the Cine 7 touchscreen.
Compatibility
SmallHD Cine 7 monitor
RED DSMC2 camera
Key Features- Run/stop
- Color controls
- Exposure controls
- Status
- Color temperature
- Video format
- Playback
- Shutter
- Menu control
- More
| Whether producing content for broadcast or cinema distribution, you can depend on the SmallHD 13" Production Monitor with Built-In Teradek Sidekick II Receiver to display accurate colors in professional studio and location settings. The built-in Sidekick II receiver makes this a small package of monitor and receiver that accepts 3D LUTS for monitoring from wireless transmitters or SDI sources. Each monitor is color-calibrated by SmallHD to ensure consistently accurate color representation, with 93% coverage of the NTSC color space. The Color Intelligence engine accepts LUTs from industry-standard solutions.True 10-bit color depth can differentiate between 1024 levels of brightness, per channel, for smooth gradients essential for critical image analysis. The LED backlight provides 1500 cd/m ? of brightness. The monitor can tough it out in the production world with its milled aluminum body, versatile power options, and a wide selection of monitoring tools. Having a color-accurate monitor on set means that directors, clients, or DITs can have a dependable reference display for nearly any kind of production.
Built-In Wireless Receiver
Compatible with Teradek Bolt 500, 1000, 3000, and Focus Bolt/Cine 7 500 transmitters.
PageBuilder OS
Originally featured in the 500 and 700-series models, and extrapolated for the Production Monitor series, the PageBuilder OS is an intuitive graphical user interface (GUI) that puts all the advanced functionality of the 1703 at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, multiview, and focusing aids to different "pages". These pages can be easily flipped through using the joystick, or selected with the four quick-access buttons on the front panel. Additional buttons on the front panel can toggle monitoring tools on and off for each page.
3D LUT Processing
To keep your images consistent from production through to post-production, import 3D LUTs and display the treated image side by side with the untreated image, to correctly gauge exposure while visualizing what is being recorded by the camera. A side-by-side preview can also be used with the HDR preview function. Separate LUT-treated images can be sent downstream over SDI and HDMI, so you can have the 1303 display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image capture function saves a still frame from the incoming video stream onto an SD card, and records the applied 3D LUT for post-production reference.
On-Set Problem Solving
The PageBuilder OS has a dedicated Output Preview page which allows you to apply LUTs and other image adjustments specific to the output signal from the monitor.
HD Scopes
Fill the screen with up to three simultaneous scopes, including waveform, vectorscope, and histogram, while still being able to observe the camera feed. The Color Picker function can analyze the raw color values of any individual pixel in the frame.
Exposure Tools
Exposure assist supports both ARRI and Rainbow false color. Utilize zebra lines to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Focus Assist and Peaking Tools
Focus assist creates a bright highlight on in-focus subject matter? highly recommended when focusing on the fly. Focus Peaking increases the image sharpness, allowing for more detailed focusing. The color and intensity of the peaking can be adjusted to your preference. | The SmallHD FOCUS Bolt 500 RX Wireless Monitor combines SmallHD's popular FOCUS monitor with Teradek's Bolt 500 wireless receiver, all in a single unit. Using the built-in receiver, the Focus Bolt can receive uncompressed 10-bit 4:2:2 HD video from a Teradek Bolt 500, Bolt 500 LT, Bolt 500 XT transmitters, or a SmallHD FOCUS Bolt 500 TX, from up to 500' away, line-of-sight. Comfortable rubberized handgrips are included along with a neck strap, so you can comfortably hold onto the monitor as you roam around the set. An L-series battery kit for powering the monitor, cable clips, matte and glossy screen protectors, a cleaning cloth, and a micro-HDMI to HDMI adapter are included as well.Display-wise, the FOCUS Bolt 500 RX is based off the same display and I/O as the well-regarded standard FOCUS models. The 800 cd/m ? bright touchscreen 1280 x 720 IPS LCD panel can be viewed in daylight and can be driven by either the single micro-HDMI input or the wireless input. Using the intuitive Swipe OS, you can turn on various monitoring tools like waveform, false color, and vectorscope, as well as focusing aids like peaking, with a tap. If your camera outputs UHD 4K over HDMI, the FOCUS will support that input resolution as well as HD and SD inputs. The wireless input only supports up to HD resolutions. At the rear of the monitor, a single NP-F battery bay accepts the included L-series battery for power.
Swipe OS
Built on SmallHD's intuitive PageBuilder OS, Swipe OS offers the same intuitiveness of a graphical user interface (GUI), though with touchscreen navigation. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, and focusing aids to up to 12 different "pages". Using the touchscreen, swipe through different preset pages and toggle monitoring tools on or off with ease. |
