Assured Gift with each Purchase

Genuine Products | Fast Support | Fast Delivery

AWPRO-LOGO

Rode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield

Brand:Rode

637.06 د.إ
Excl. VAT

Out of stock
Sold: 0
Available: 0

Key features

  • Mobile Journalist, Vlogger, Run & Gun
  • VideoMic GO Camera-Mount Shotgun Mic
  • Auray Windshield Reduces Wind Noise
  • Runs on Plug-In Power
Out of stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Enjoy free shipping on orders above AED 300
  • Genuine Products
  • Manufacturer's Warranty
  • Exclusive Offers
  • Delivery within 1-3 Days
  • Secured Payment

Description

This AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone’s shockmount or cable run.
Rode VideoMic GO Camera-Mount Shotgun Microphone
Longer than Rode’s VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.

This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
Easy Hookup to Camera
A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Runs on Plug-In Power
No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.
Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).
Windscreen Minimizes Wind Noise
The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).
Connectivity Options
Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396
Auray WSW-VMG Custom Windbuster for Rode VideoMic GO
The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.

This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.

When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone.

The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection.
Fits:
Rode VideoMic GO

Quick Comparison

SettingsRode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield removeRode NT2-A Studio Solution Package removeRode HS2 Lightweight Headset Microphone Pink/Large removeRode M1 Handheld Cardioid Dynamic Microphone removeRode M5 Compact 1/2" Condenser Microphone (Matched Pair) removeRode M2 Professional Condenser Handheld Microphone remove
NameRode VideoMic GO Camera-Mount Shotgun Microphone Kit with Auray Custom Windshield removeRode NT2-A Studio Solution Package removeRode HS2 Lightweight Headset Microphone Pink/Large removeRode M1 Handheld Cardioid Dynamic Microphone removeRode M5 Compact 1/2" Condenser Microphone (Matched Pair) removeRode M2 Professional Condenser Handheld Microphone remove
Image
SKU
Rating
Price637.06 د.إ
Excl. VAT
2,050.06 د.إ
Excl. VAT
1,536.26 د.إ
Excl. VAT
508.66 د.إ
Excl. VAT
1,022.46 د.إ
Excl. VAT
919.70 د.إ
Excl. VAT
Stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
AvailabilityOut of stockOut of stockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionKey features
  • Mobile Journalist, Vlogger, Run & Gun
  • VideoMic GO Camera-Mount Shotgun Mic
  • Auray Windshield Reduces Wind Noise
  • Runs on Plug-In Power
Key features
  • SM6 Shock Mount & Pop Filter
  • XLR Cable
  • Dust Cover
  • John Merchant Instructional DVD
Key features
  • Low-Profile Ergonomic Design
  • Ultra-Lightweight Construction
  • Adjustable Stainless-Steel Boom Arm
  • Hypoallergenic Silicone Ear Strips
Key features
  • Cardioid Polar Pattern
  • High-Output Neodymium Dynamic Capsule
  • 75 Hz to 18 kHz Frequency Response
  • Low Handling Noise
Key features
  • 1/2" Capsule with Gold-Plated Membrane
  • Cardioid Polar Pattern
  • All-Metal Body
  • Ultra-Low Noise
Key features
  • Condenser Capsule
  • Supercardioid Polar Pattern
  • Wide Frequency Response
  • Detailed Vocal Reproduction
ContentThis AWPRO Kit includes the Rode VideoMic GO camera-mount shotgun microphone and an Auray custom furry windshield, providing a simple mic setup for quality indoor or outdoor audio recording using any camcorder or HDSLR camera that supplies plug-in power. The Auray windshield slips over the VideoMic GO to deliver effective wind noise reduction and minimal high-frequency loss without impeding the microphone's shockmount or cable run. Rode VideoMic GO Camera-Mount Shotgun Microphone Longer than Rode's VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device. Shotgun Mic with Directional Sound Pickup Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders. Easy Hookup to Camera A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder. Runs on Plug-In Power No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries. Integrated Shockmount Inhibits Vibrations Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately). Windscreen Minimizes Wind Noise The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately). Connectivity Options Expand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.UPC: 698813003396 Auray WSW-VMG Custom Windbuster for Rode VideoMic GO The Auray WSW Series Custom Windbusters provide dual-layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.This WSW-VMG Custom Windbuster has been tailor-made to fit the VideoMic GO and is designed to be used over its existing foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.When used on the VideoMic GO, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light to moderate breeze conditions (4-17 mph) and users can generally expect a 30dB to 40dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction. In addition to dual-layered wind protection, the WSW-VMG helps prevent moisture and dirt from damaging your microphone.The WSW-VMG Custom Windbuster for Rode VideoMic GO shotgun microphone offers an extremely effective dual-layered solution for wind protection. Fits: Rode VideoMic GOThe NT2-A Studio Solution Package from RODE includes the NT2-A multi-pattern condenser microphone, the SM6 shock mount and pop filter, a 10' XLR cable, and a dust cover. Also included in this package is an instructional DVD with an in-depth tutorial by Grammy nominated producer John Merchant.The Rode NT2-A has a high-quality, large dual-diaphragm multi-pattern condenser element that delivers maximum flexibility in many recording scenarios. Superior electronics result in ultra-low noise performance, and its fixed variable pad, pattern and filter adjustments provide the flexibility and control needed by musicians and recording engineers alike.The Rode NT2-A Studio Solution Package includes the SM6 shockmount, XLR cable, dust cover and instructional DVD by Grammy Award nominated producer John MerchantLarge 1" (25mm) HF1 gold sputtered capsule, On body control of polar pattern, HPF and PAD, Three position variable polar pattern - Omni, Cardioid or Figure 8 Three position variable High-Pass Filter - Flat, 40Hz or 80Hz, Three position PAD - 0dB, -5dB or -10dB, Ultra low noise, transformerless surface mount circuitry, Includes SM6 shock mount with integrated pop filter, 3m XLR cable, dustcover and exclusive training DVD.Internal capsule shock mounting. Designed and manufactured in Australia.The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth.Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual.Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters.Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications.The Rode M1 is a handheld cardioid dynamic microphone designed for reliable reproduction of vocals, speech, guitars, and drums in concert venues, houses of worship, and live stage applications. Its dynamic element utilizes a neodymium magnet for high output without excessive preamp gain and delivers a frequency response of 75 Hz to 18 kHz. The resulting tone is smooth and defined with a mild bump at 200 Hz and a gentle rise from 4 to 10 kHz.The cardioid polar pattern excels at rejecting sound at its off-axis points, yielding enhanced immunity to feedback. The balanced, low-impedance output and low handling noise maintain signal integrity, and the durable, all-metal construction delivers tour-worthy toughness. The M1's gold-plated XLR 3-pin output ensures high conductivity and compatibility with most microphone preamps. It ships with a microphone clip and a padded zip pouch.All-metal construction designed to handle touringCardioid polar pattern minimizes off-axis noise and feedback Dynamic capsule maximizes headroom Gold-plated XLR 3-pin connector resists tarnish and maximizes conductivityDesigned and manufactured in Australia.Each of this matched pair of M5 Compact 1/2" Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response. This permanently polarized condenser mic can be used in several environments including stage, theater, studio, and home applications. It is well-suited for instruments, choirs, or anywhere you would employ a small-diaphragm condenser microphone.The matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones. The M5 is finished with Rode's ceramic coating, which offers a sleek matte-black finish. WS5 windshields and RM5 stand mounts are included.This matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones, Ceramic coating with matte-black finish1/2" capsule with gold-plated membrane, Cardioid polar pattern, All-metal body, Ultra-low noise.The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.Live condenser vocal microphone Feedback rejecting supercardioid pick up pattern Locking on/off switch Heavy duty metal body High level of RF rejection Low handling noise Designed and manufactured in Australia Ten year warranty.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Shopping Cart
No products in the basket.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare