| Content | Use the Rode RODELink Lav omnidirectional lavalier microphone to get the convenience and clarity of a broadcast-quality, clip-on lapel mic for your Rode RODELink wireless system. Ideal for mobile journalists and videographers, the RODELink Lav features a durable Kevlar-reinforced cable terminated in a locking gold-plated 3.5mm TRS connector for enhanced conductivity and compatibility with a variety of wireless transmitters from Sennheiser and Senal.The miniature mic capsule is easily concealed and features a foam pop shield to reduce vocal plosives. Its omnidirectional polar pattern provides 360 degrees of sound pickup while the condenser element yields a wide, full-frequency response, giving you clear and intelligible voice capture.Designed for use with Rode RODELink wireless microphone systemsLocking 3.5mm TRS output provides compatibility with Rode RODELink TX-BELT beltpack transmitters, RODELink TX-XLR transmitters, and many wireless transmitters from Sennheiser and SenalDiscreet miniature mic capsule is easily concealedCondenser mic element and active JFET electronics yield a wide 20 Hz to 20 kHz frequency rangeKevlar-reinforced cable ensures lasting durabilityGold plating on 3.5mm plug enhances conductivityFoam pop shield softens vocal plosives and wind noiseMic clip with cable management included for neatly securing microphone to clothingSmall pouch included for storage and transport | The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth.Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual.Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters.Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications. | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The NT-USB USB Microphone from Rode is a cardioid, side-address USB microphone that is capable of capturing audio in up to 16-bit / 48 kHz resolution. It has an integrated headphone amplifier and 1/8" stereo headphone jack that allows for monitoring. The on-mic Direct Mix Control allows you to select between mic input and source input for monitoring.The NT-USB is compatible with the use of an optional camera kit. Included with the mic are a pop shield, a tripod desk stand, a ring mount, a 20-foot long USB cable, and a storage pouch.3.5mm stereo headphone jack for zero-latency
monitoring, Direct mix control between mic input and source output, Compatible with Apple iPad with optional camera kit, Cardioid polar pattern. | The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.
Rode AI-1 Studio-Quality USB Audio Interface
The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.- Desktop USB audio interface with low-noise Class-A discrete preamplifier
- Sampling rate of up to 96kHz/24-bit
- One combo XLR-1/4" combo input
- Two balanced 1/4" monitor outputs
- One discrete, studio-quality headphone output
- Phantom power for condenser microphones
- Zero-latency monitor mode
- USB bus powered
- USB Type-C connector for future proof operation
- Rugged body with Satin Black Finish
- Class compliant? no drivers required
- Includes Ableton Live Lite
- Includes USB cable
Rode NT1 Cardioid Condenser Microphone (Microphone Only)
The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE's HF6 1" capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.The microphone's electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.
Rode SMR Advanced Shock Mount for Large Diaphragm Condenser Mics
The RodeSMR is a professional-grade shock mount for large diaphragm condenser mics.Featuring a double-Lyre suspension system, the SMR enhances Rycote? s Lyre system by using a smaller inner Lyre to act as a tensioning element.The SMR's removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone.The SMR'sclamping system design utilizes a large surface area, allowingfor ample friction and weight handling, without the need for over-tightening of the locking thread.With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.The SMR's frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.A base nut is also included, suitable for all compatible Rode microphones. | The Rode NT45C is a replacement cardioid capsule for the Rode NT4, NT5, NT6 and NT55 large diaphragm condenser microphones. The capsule is designed to provide identical sonic character to that of the original.. |
