| Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 0.5" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.
Battery or Phantom-Powered Condenser
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
Cardioid Polar Pattern
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
-10 dB and -20 dB Pad Switch
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
High-Pass Filter
A high-pass filter switch eliminates noise and hum at the lower frequency range. | The Rode NT5 is a small diaphragm microphone featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage, monitors, additional instruments, etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum overhead miking, stereo capturing of instruments, vocal capturing, etc. The NT5 is powered via +24V or +48V phantom power. The package includes a windscreen, mic clip, and custom case.
Cardioid Pattern
The cardioid polar pattern is effective in minimizing off-axis noise due to leakage, additional instruments, room ambiance, etc.
Wide Frequency Response
The NT5 features a frequency response of 20 Hz to 20 kHz allowing the flexibility to capture accurately in any recording or sound reinforcement scenario. | The Rode M1 is a handheld cardioid dynamic microphone designed for reliable reproduction of vocals, speech, guitars, and drums in concert venues, houses of worship, and live stage applications. Its dynamic element utilizes a neodymium magnet for high output without excessive preamp gain and delivers a frequency response of 75 Hz to 18 kHz. The resulting tone is smooth and defined with a mild bump at 200 Hz and a gentle rise from 4 to 10 kHz.The cardioid polar pattern excels at rejecting sound at its off-axis points, yielding enhanced immunity to feedback. The balanced, low-impedance output and low handling noise maintain signal integrity, and the durable, all-metal construction delivers tour-worthy toughness. The M1's gold-plated XLR 3-pin output ensures high conductivity and compatibility with most microphone preamps. It ships with a microphone clip and a padded zip pouch.All-metal construction designed to handle touringCardioid polar pattern minimizes off-axis noise and feedback Dynamic capsule maximizes headroom Gold-plated XLR 3-pin connector resists tarnish and maximizes conductivityDesigned and manufactured in Australia. | The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth.Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual.Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters.Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications. | The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.Live condenser vocal microphone
Feedback rejecting supercardioid pick up pattern
Locking on/off switch
Heavy duty metal body
High level of RF rejection
Low handling noise
Designed and manufactured in Australia
Ten year warranty. |
