Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The NT1-A Large-Diaphragm Condenser Microphone from RODE is a 1" cardioid condenser microphone. It has a self-noise level of 5 dB-A, making it a great choice for a vocal microphone, as well as for recording guitars and percussion instruments.A studio-grade pop shield and shockmount is included, along with a 20' microphone cable, dust cover, and an instructional DVD with recording tips.
Large Diaphragm
The 1" diaphragm provides a wide frequency response and excellent signal-to-noise ratio
Cardioid Polar Pattern
The cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambiance, monitors, and off-axis instruments
Transformerless Output
The transformerless output electronics result in quiet, noise-free output while maintaining maximum signal gain
48V Phantom Power
The microphone uses standard 48V phantom power, which is supplied through the standard XLR connector
Accessory Package
The accessory package includes a studio-grade shock mount with an integrated pop filter, a premium 20' cable, a dust cover, and a bonus DVD with microphone tips and techniques. | The K2 Variable Pattern Dual 1.0" Condenser Valve Microphone from Rode delivers the sonic quality expected of a Class-A tube microphone. At the heart of the microphone is a hand-selected 6922 twin-triode valve. The valve provides warmth and detail while reproducing a flat, uncolored frequency response. The K2 boasts a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transients. An external power supply provides user access of up to 3 polar patterns. Cardioid, omnidirectional, and figure eight are all available and the patterns are user variable, allowing custom contouring of each pattern as needed.
Class-A Valve Circuitry
At the heart of the microphone is a hand-selected 6922 twin-triode valve. The tube electronics yield the warmth and transparency expected of Class-A analog electronics.
Variable Polar Patterns
The K2 features cardioid, omni-directional, and figure-eight polar patterns. The patterns are user variable, allowing custom contouring of each pattern as needed.
Wide Dynamic Range
The microphone features a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transient signals. | The NT-1 KIT 1" Cardioid Condenser Microphone from RODE includes the Rode NT1 cardioid condenser microphone, an SM6 premium shockmount with a detachable pop filter, and a microphone dust cover. The kit can be used to capture audio for vocalists and instruments in recording studio applications and more.While the body of the NT-1 still resembles the NT1-A, the mic has been completely redesigned except for the mesh grille. The large-diaphragm cardioid condenser microphone features RODE's updated HF6 capsule that is designed to provide a detailed midrange response with smooth highs and a warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an extremely quiet microphone.The body of the mic is machined from nickel-plated aluminum and is then coated in a ceramic layer, which is electrostatically applied for a scratch-resistant finish.Large 1" condenser capsule with gold-plated membrane, Cardioid polar pattern, Internal Rycote Lyre-based capsule shockmounting system, Ultralow-noise performance of only 4.5 dBA, State-of-the-art surface mount electronicsSM6 shockmount features a detachable pop filter, 10-year extended warranty when you register your microphone. | The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragmOn-Air indicator LEDLow noiseVoice-tailored low-cut featureInternal pop filter. | The NT2-A Studio Solution Package from RODE includes the NT2-A multi-pattern condenser microphone, the SM6 shock mount and pop filter, a 10' XLR cable, and a dust cover. Also included in this package is an instructional DVD with an in-depth tutorial by Grammy nominated producer John Merchant.The Rode NT2-A has a high-quality, large dual-diaphragm multi-pattern condenser element that delivers maximum flexibility in many recording scenarios. Superior electronics result in ultra-low noise performance, and its fixed variable pad, pattern and filter adjustments provide the flexibility and control needed by musicians and recording engineers alike.The Rode NT2-A Studio Solution Package includes the SM6 shockmount, XLR cable, dust cover and instructional DVD by Grammy Award nominated producer John MerchantLarge 1" (25mm) HF1 gold sputtered capsule, On body control of polar pattern, HPF and PAD, Three position variable polar pattern - Omni, Cardioid or Figure 8 Three position variable High-Pass Filter - Flat,
40Hz or 80Hz, Three position PAD - 0dB, -5dB or -10dB, Ultra low noise, transformerless surface mount circuitry, Includes SM6 shock mount with integrated pop filter,
3m XLR cable, dustcover and exclusive training DVD.Internal capsule shock mounting. Designed and manufactured in Australia. |