| Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The Rode NT5 is a matched pair of small diaphragm microphones featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage, monitors, additional instruments, etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum overhead miking, stereo capturing of instruments, vocal capturing, etc. The NT5 is powered via +24V or +48V phantom power. The package includes two windscreens, two mic clips, and a custom case.
Cardioid Pattern
The cardioid polar pattern is effective in minimizing off-axis noise due to leakage, additional instruments, room ambiance, etc.
Wide Frequency Response
The NT5 features a frequency response of 20 Hz to 20 kHz allowing the flexibility to capture accurately in any recording or sound reinforcement scenario.. | The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragmOn-Air indicator LEDLow noiseVoice-tailored low-cut featureInternal pop filter. | Bundled together by B&H for your convenience, the R? DE Lavalier Microphone Kit with 3.5mm MiCon Connector is designed to provide a bridge between the R? DE Lavalier's MiCon termination point and Sennheiser transmitters which utilize a 3.5mm connection. The R? DE Lavalier provides an omnidirectional polar pattern, a condenser capsule, an included windscreen, and a wind muff. The adapter, on the other hand, accepts MiCon connections and terminates in a locking 3.5mm plug, suitable for use with the Sennheiser K500 G3, SK300 G3, SK100 G3, SK500 G2, SK300 G2, and SK2 Freeport.Note:
MiCon connection is proprietary. Requires optional adapter for use with wireless transmitters, preamplifiers, etc.Rode Lavalier MicrophoneThe R? DE Lavalier Microphone is a quality lavalier with an omnidirectional polar pattern and condenser element, well suited for general speech pickup in sermons, presentations, instruction, interviews, etc. The microphone's detachable cable is easily replaceable in the event of a short or break, and its proprietary MiCon connection allows you to select from a number of optional adapters, for use with virtually any wireless bodypack transmitter. The microphone ships in a protective storage case and includes a waterproof pop-filter, wind-muff and clip.Note:
MiCon connection is proprietary. Requires optional adapter for use with wireless transmitters, preamplifiers, etc.Clear audio and low handling noiseIncluded water resistant pop filter and mini-furry for high wind protectionRugged and secure protection for the microphone, cables and accessories.MiCon connector system provides seamless integration between all of R? DE's compact wearable microphones and a wide range of wireless systems.Rode MiCon 1 Connector for Rode MiCon Microphones (Sennheiser)This Rode MiCon 1 Adapter is intended for use with all Rode headsets and microphones that utilize MiCon connectors, such as the Rode Pinmic and lavalier microphones. The adapter features an 1/8" (3.5mm) locking mini connection for use with compatible bodypack transmitters, such as the Sennheiser SK500 G3, SK300 G3, SK100 G3, SK500 G2 SK300 G2 and SK2 Freeport. | The NT-1 KIT 1" Cardioid Condenser Microphone from RODE includes the Rode NT1 cardioid condenser microphone, an SM6 premium shockmount with a detachable pop filter, and a microphone dust cover. The kit can be used to capture audio for vocalists and instruments in recording studio applications and more.While the body of the NT-1 still resembles the NT1-A, the mic has been completely redesigned except for the mesh grille. The large-diaphragm cardioid condenser microphone features RODE's updated HF6 capsule that is designed to provide a detailed midrange response with smooth highs and a warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an extremely quiet microphone.The body of the mic is machined from nickel-plated aluminum and is then coated in a ceramic layer, which is electrostatically applied for a scratch-resistant finish.Large 1" condenser capsule with gold-plated membrane, Cardioid polar pattern, Internal Rycote Lyre-based capsule shockmounting system, Ultralow-noise performance of only 4.5 dBA, State-of-the-art surface mount electronicsSM6 shockmount features a detachable pop filter, 10-year extended warranty when you register your microphone. | Each of this matched pair of M5 Compact 1/2" Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response. This permanently polarized condenser mic can be used in several environments including stage, theater, studio, and home applications. It is well-suited for instruments, choirs, or anywhere you would employ a small-diaphragm condenser microphone.The matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones. The M5 is finished with Rode's ceramic coating, which offers a sleek matte-black finish. WS5 windshields and RM5 stand mounts are included.This matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones, Ceramic coating with matte-black finish1/2" capsule with gold-plated membrane, Cardioid polar pattern, All-metal body, Ultra-low noise. |
