| Content | Exclusively from AWPRO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.
Rode Broadcaster Condenser Microphone
The Broadcaster Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features a true full-range response especially suited for voice-over use.It has an emphasized proximity effect and features an internal pop filter, designed to minimize plosive sounds that can overload the microphone capsule and distort the audio output. In addition to the native 20 Hz-20 kHz response, a selectable high-pass filter at 75 Hz is available to prevent low-end noise, such as air conditioners and traffic, from being recorded.The Broadcaster features an 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.HF2 1" capsule with gold-plated diaphragm, On-Air indicator LED, Low noise, Voice-tailored low-cut feature, Internal pop filter.
O.C. White Podcast Pro by Accu-Lite Mic Boom Package
Designed for podcasters looking for a professional mic boom, the O.C. White Podcast Pro by Accu-Lite is a handsome, easily adjustable, squeak-free mic arm. The package includes a black mic arm, a table edge C-clamp, and a preterminated XLR cable (9? of cable at the front, and 6? at the end). The arm holds most microphones that weigh approximately between 1.4 and 2.5 lb. Simply clamp to your table, attach your microphone, and you? re ready to go.Note:Microphone not included
Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grill diameter of larger than 2".The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
Fits these and other similar sized microphones:
AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1. | The NT4 X/Y Stereo Condenser Microphone from Rode combines an acoustically matched pair of 1/2" cardioid condenser capsules fixed in a perfect 90 ? near-coincident alignment. It can be used for drum overheads, percussion, choir vocals, environmental recording, and sound design in a studio or in the field.The NT4's versatility is extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm mini-jack cables are supplied to ensure the NT4 is ready to record to a mixing console, portable recorder, or camera. Also included is an RC4 rugged microphone case, a WS4 pop filter/wind shield, and a durable RM3 microphone clip.
X/Y Stereo Elements
The NT4 features dual cardioid elements mounted in an X/Y stereo configuration. The X/Y configuration results in accurate representation of signal within the "Left/Right" stereo field.
Matched Capsules
Both cardioid capsules are matched in sensitivity and frequency response for optimum results.
Phantom or Battery Powered
The NT4 can be powered via Phantom Power or a standard alkaline 9V battery.
Flexible Connectivity
The NT4 includes a dual XLR cable and a stereo 1/8" mini-jack output cable making the it ready for use in any recording environment. | The NT2-A Studio Solution Package from RODE includes the NT2-A multi-pattern condenser microphone, the SM6 shock mount and pop filter, a 10' XLR cable, and a dust cover. Also included in this package is an instructional DVD with an in-depth tutorial by Grammy nominated producer John Merchant.The Rode NT2-A has a high-quality, large dual-diaphragm multi-pattern condenser element that delivers maximum flexibility in many recording scenarios. Superior electronics result in ultra-low noise performance, and its fixed variable pad, pattern and filter adjustments provide the flexibility and control needed by musicians and recording engineers alike.The Rode NT2-A Studio Solution Package includes the SM6 shockmount, XLR cable, dust cover and instructional DVD by Grammy Award nominated producer John MerchantLarge 1" (25mm) HF1 gold sputtered capsule, On body control of polar pattern, HPF and PAD, Three position variable polar pattern - Omni, Cardioid or Figure 8 Three position variable High-Pass Filter - Flat,
40Hz or 80Hz, Three position PAD - 0dB, -5dB or -10dB, Ultra low noise, transformerless surface mount circuitry, Includes SM6 shock mount with integrated pop filter,
3m XLR cable, dustcover and exclusive training DVD.Internal capsule shock mounting. Designed and manufactured in Australia. | The NT2000 Variable Pattern Studio Condenser Microphone from RODE is a studio-quality, large diaphragm condenser microphone with continuously variable polar patterns. Its polar patterns selection, filter, and pad are conveniently located on the front of the microphone body for ease of use. The gold-sputtered, dual 1" capsule provides low self-noise (7 dB-A) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged).
Dual Diaphragm Design
A 1" edge terminated, gold sputtered, dual 5uM diaphragm yields a wide frequency response of 20 Hz to 20 kHz with a max SPL of 147 dB. The dual diaphragm design provides flexible pattern and sensitivity response, making it versatile in any scenario.
Variable Polar Patterns
Cardioid, omnidirectional, and figure 8 patterns are user selectable. Continuously variable variations of each allow tailoring of all patterns resulting in perfect pick up settings with each use.
Variable Attenuation
Continuously variable attenuation adjusts impedance response allowing transparent, distortion free pick-up of transient signals. Attenuation range is user variable between 0 to -10 dB.
Variable High Pass Filter
The NT2000 also features a user variable high-pass filter. This provides flexible user contouring over frequency response curves. | The pink/large HS2 Lightweight Headset Microphone from R? DE is a low profile, ergonomic microphone that provides clean, clear and pronounced audio for applications such as public speaking, lectures, conferences, or anywhere a microphone needs to be in close proximity to any presenter's mouth.Featuring an adjustable, corrosion resistant stainless spring-steel boom arm and headband, the headset has hypoallergenic silicone ear strips for maximum flexibility and comfort. Coated in a durable ceramic painted finish in either black or pink, the HS2 is available in two different sizes (small or large) to ensure a perfect fit for any individual.Furthermore, it is connected via a 4' braided and shielded Kevlar reinforced cable, terminating with a gold-plated 1/8" TRS mini-jack output connector, which has a removable locking nut that ensures a secure connection to a wide range of recording devices and wireless transmitters.Finally, the HS2's lightweight, comfortable fit, low self-noise, minimal appearance, and user friendly omnidirectional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship, and live vocal performance applications. | The NT-1 KIT 1" Cardioid Condenser Microphone from RODE includes the Rode NT1 cardioid condenser microphone, an SM6 premium shockmount with a detachable pop filter, and a microphone dust cover. The kit can be used to capture audio for vocalists and instruments in recording studio applications and more.While the body of the NT-1 still resembles the NT1-A, the mic has been completely redesigned except for the mesh grille. The large-diaphragm cardioid condenser microphone features RODE's updated HF6 capsule that is designed to provide a detailed midrange response with smooth highs and a warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an extremely quiet microphone.The body of the mic is machined from nickel-plated aluminum and is then coated in a ceramic layer, which is electrostatically applied for a scratch-resistant finish.Large 1" condenser capsule with gold-plated membrane, Cardioid polar pattern, Internal Rycote Lyre-based capsule shockmounting system, Ultralow-noise performance of only 4.5 dBA, State-of-the-art surface mount electronicsSM6 shockmount features a detachable pop filter, 10-year extended warranty when you register your microphone. |
