fbpx
Ikan BLITZ 3000 3G-SDI/HDMI WIRELESS VIDEO TRANSMITTER AND RECEIVER KIT Pro Video Ikan

Ikan BLITZ 3000 3G-SDI/HDMI WIRELESS VIDEO TRANSMITTER AND RECEIVER KIT

  • No Review
15,540.00 د.إ
  • Blitz 1500 Transmitter and Receiver
  • High-Gain Antenna Doubles Range to 3000′
  • 1080p60 10-Bit Transmission, Zero Delay
  • HDMI/SDI Input, HDMI/Dual SDI Output
The ikan Blitz 3000 Kit includes the Blitz 1500 transmitter/receiver system and a high-gain antenna that doubles the transmission range to 3000′. The system transmits up to 1080p60 10-bit 4:2:2 uncompressed video with zero delay over the 5.1-5.9 GHz
Availability : In stock
Model: BZ3000

Barcode: 847983012152

AWP-IK 018
Compare

Description

BZ3000

The Ikan Blitz 3000 is the latest addition to the Blitz family of wireless transmitters. With the BZ3000, we added a high gain panel antenna to increase the range to 3000 feet. The Blitz features uncompressed, zero delay wireless video in a lightweight affordable package. With a 3000 foot range, this system is perfect for those professionals that are in need of ultra-long range wireless video.

ZERO DELAY AND 3000 FEET OF RANGE

The Blitz supports zero delay video transmission, which means that it can be used in situations where timing is critical. It features a 3000 foot range to give you the freedom to move about without having to worry about losing signal.

 

UNCOMPRESSED VIDEO

The Blitz 3000 Pro sends uncompressed video and has zero delay because the system doesn’t waste time compressing and uncompressing the video. The Blitz supports up to 1080 60p uncompressed video.

BLITZ TECHNOLOGY

INFERIOR TECHNOLOGY

INPUTS AND OUTPUTS

Whether you are using HDMI or SDI, the Blitz has you covered. It supports both HDMI 1.3 and 3G-SDI so you get uncompressed high definition video up to 1080 60p. The Blitz systems are also capable of cross converting whatever signal you are feeding them. For example, you can go from SDI to HDMI or HDMI to SDI.

BATTERY POWER

To keep the system light and the cost of use low, we include the necessary battery plates with the Blitz. They come pre-installed and allow you to power the units easily and reliably. The transmitter uses the Sony L Series style batteries and the receiver relies on a V-Mount battery. The units also include 2-pin LEMO compatible power connectors so you can supply power externally with the included P-Tap cables. This allows you to use the same pro batteries that are powering your camera to power the Blitz as well.

DURABLE, RELIABLE, AND EASY TO USE

The Blitz 3000 Pro is made out of durable machined aluminum and is extremely easy to set up. You don’t have to mess with complicated menus or setups with its simple-to-use wireless channel selection switch. Just power on the units and they will sync in about 20 seconds or less. The transmitter is small and lightweight so it can be mounted just about anywhere like to your camera’s shoemount. The receiver can be used with or without the panel antenna. This allows you to get more compact when you don’t need the full wireless range. The receiver features five external antennas to ensure a strong signal as well as 4 signal strength LED indicators.

THE COMPLETE PACKAGE

The Blitz 3000 Pro ships inside of a durable hard case to make transporting easy. The case holds the panel antenna and the complete wireless system with accessories. This includes an articulating arm, clamp, and shoemount to help you mount the system. Two P-Tap to LEMO compatible cables are also included to give you more power options. With the Blitz system, you always get the complete package.

Specifications

Wireless
Wireless Range 1500′ / 457.2 m (Line-of-Sight)
Channel Bandwidth 40 MHz
Frequency Range 5.1 to 5.9 GHz
RF Sensitivity -75 dBm
Wireless Video Compression Uncompressed
Interfaces
Transmitter Antenna Ports 2 x RP-SMA Male
Receiver Antenna Ports 5 x RP-SMA Male
Transmitter Video Connectors 1 x HDMI Input
1 x BNC (3G-SDI / HD-SDI / SD-SDI) Input
1 x BNC (3G-SDI / HD-SDI / SD-SDI) Loop Output
Receiver Video Connectors 1 x HDMI Output
2 x BNC (3G-SDI / HD-SDI / SD-SDI) Output
Transmitter Audio Connectors 1 x 1/8″ / 3.5 mm TRS Input
Embedded Audio SDI: 4-Channel
Format Support
Video Format HDMI:
1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
HDMI:
1080i at 50, 59.94 fps
HDMI:
720p at 50, 59.94, 60 fps
HDMI:
576i/480i
Video Standard Compliance SMPTE 259M/274M/292M/296M/372M/425M
Power
Transmitter Battery Support 1 x Sony L-Series / NP-F Type
Receiver Battery Support 1 x V-Mount
Transmitter Power Connector 1 x 4-Pin LEMO (7 to 16.8 VDC) Input
Receiver Power Connector 1 x 4-Pin LEMO (7 to 16.8 VDC) Input
Transmitter Power Consumption Device: (6.5 W)
Receiver Power Consumption Device: (7.5 W)
Environmental
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
General
Transmitter Mounting 2 x 1/4″-20 Female
1 x 3/8″-16 Female
Receiver Mounting 3 x 1/4″-20 Female
2 x 3/8″-16 Female
Materials Aluminum
Certifications CE, FCC, as per Manufacturer
Transmitter Dimensions 4.53 x 2.64 x 0.91″ / 11.5 x 6.7 x 2.3 cm
Receiver Dimensions 7.17 x 5 x 0.94″ / 18.2 x 12.7 x 2.4 cm
Packaging Info
Package Weight 9.695 lb
Box Dimensions (LxWxH) 15.5 x 13.1 x 6.4″

Reviews

There are no reviews yet.

Be the first to review “Ikan BLITZ 3000 3G-SDI/HDMI WIRELESS VIDEO TRANSMITTER AND RECEIVER KIT”