CVW BeamLink-Quad Four Transmitters to Single Receiver Video Transmission System Overview Pro Video Draco Broadcast

CVW BeamLink-Quad Four Transmitters to Single Receiver Video Transmission System Overview

  • No Review
USD 7,206.34
  • Send Four Simultaneous SDI/HDMI Signals
  • Up to 1080p60 4:2:2 10-Bit Transmission
  • 1640′ Line-of-Sight Range
  • Tally Input/Output
  • Four Transmitters with SDI / HDMI Input
  • Receiver with Four SDI and HDMI Outputs
  • 5.1-5.8 GHz Frequency
  • OLED Status Display
  • L-Series, V-Mount, AC Power Support
Availability : In stock
Model: CVW CRBLQ

Compare

Description

The BeamLink-Quad Four Transmitters to Single Receiver Video Transmission System from Crystal Video Technology allows you to send four SDI/HDMI signals to one receiver simultaneously over a range of up to 1640′. The receiver features four SDI and four HDMI outputs. Signals up to 1080p60, 4:2:2, 10-bit can be transmitted with a latency of 60-150 ms over one RF channel on the 5.1-5.8 GHz frequency. The system also offers tally input and output, and all five units confirm transmission status via OLED displays.

 

The transmitters are designed with a built-in L-series battery plate on the rear and include a pre-installed V-mount on the front, while the receiver comes with an attached V-mount plate. The entire set can also be powered continuously. A power adapter is included for the receiver, and LEMO-to-D-Tap power cables are supplied for powering the transmitters off of compatible batteries.

 

Key Features

  • Four transmitters with SDI and HDMI input
  • Receiver with four SDI and four HDMI outputs
  • Up to 1080p60 resolution transmission
  • 1640′ line-of-sight transmission range
  • 60-150 ms latency
  • 5.1-5.8 GHz frequency
  • Tally input/output
  • Transmitters with L-series plate on the back, V-mount on the front
  • Receiver with V-mount plate
  • Includes receiver power adapter and transmitter LEMO-to-D-Tap power cables
  • OLED status display
  • AES 128-bit encryption

In the Box

  • CVW BeamLink-Quad Four Transmitters to Single Receiver Video Transmission System
  • 4 x Transmitter
  • Receiver
  • 16 x Transmitter Antenna
  • 4 x Receiver Antenna
  • 4 x 1/4″-20 Screw and Nut Connector
  • 4 x 2-Pin LEMO to D-Tap Power Cable for Transmitter
  • Power Adapter for Receiver
  • Metal Stand for Receiver
  • Limited 1-Year Warranty

Specifications

Transmitter


Connections:                                             1 x SDI input on BNC
1 x HDMI input
1 x 3.5 mm Tally output


Supported Resolution:                            Up to 1080p60 (4:2:2, 10-bit)


Transmission Range:                              1640′ / 500 m line of sight  (8 Mb/s per channel)
985′ / 300 m line of sight    (15 Mb/s per channel)


Latency:                                                      60-150 ms


Antenna:                                                 4×4 MIMO 5 dBi external antennas (eachtransmitter)


Frequency:                                                5.1-5.8 GHz


Bandwidth:                                                40 MHz


Transmission Power:                             17 dBm


Audio Formats:                                        MPEG-2 PCM


Encryption:                                               AES 128-bit encryption


Battery Support:                                       Built-in L-series battery plate on the rear, pre-
installed V-mount on the front


Mount Type:                                                1/4″-20 threaded hole


Operating Voltage:                                     12 VDC / 2 A (7-30 V)


Power Consumption:                                 12 W


Operating Temperature:                           32 to 104°F / 0 to 40°C


Storage Temperature:                                -4 to 176°F / -20 to 80°C


Dimensions:                                                   5 x 3.2 x 1.5″ / 12.7 x 8.1 x 3.7 cm


Receiver


Connections:                 4 x SDI outputs on BNC, 4 x HDMI outputs, 4 x 3.5 mm
                             Tally inputs, 1 x RJ45 port
                             SDI Protocol: SMPTE 424M 3G-SDI

Resolution Supported:            1080p60

Antenna:                         4x4 MIMO 5 dBi external antennas

Receiving Sensitivity:           -70 dBm

Frequency:                        5.1-5.8 GHz

Bandwidth:                        40 MHz

Transmission Range:            1640' / 500 m line of sight (8 Mb/s per channel)
                               985' / 300 m line of sight (15 Mb/s per channel)

Audio Formats:                 MPEG-2 PCM

Encryption:                    AES 128-bit encryption

Battery Support:               V-Mount Plate

Operating Voltage:            12 VDC / 3 A (7-17 V)

Power Consumption:            20 W

 Operating Temperature:       14 to 122°F / -10 to 50°C

Storage Temperature:          -4 to 176°F / -20 to 80°C

Dimensions:                                              6.9 x 3.2 x 9.3″ / 17.6 x 8.1 x 23.5 cmC

Packaging Info:


Packaging Weight:                                                 17.8 lb


Packaging Dimensions:                                        18.9 x 14.2 x 8.3″


 

Reviews

There are no reviews yet.

Be the first to review “CVW BeamLink-Quad Four Transmitters to Single Receiver Video Transmission System Overview”