| Description | Key features- Load Capacity: 17.64 lb
- Maximum Vertical Height: 12.9'
- 5/8" Stud with 1/4"-20, 3/8"-16" Threads
- Refillable Counterweight Bag Included
| Key features- Softens and Diffuses Light Output
- Translucent White Material
- Black Backing Controls Light Spill
- Drawstring Opening for Light
| Key features- Spreads and Diffuses Light
- Silver Interior for High Reflectivity
- Black Backing
| Key features- Allows Indra to Run on 100 - 240 VAC
- Full Power Recycling: 1.5 Sec
- Also Powers Select On-Camera Flashes
| Key features- For Indra500 and Indra360 TTL Lights
- Fits Many 7" Reflectors
- Four-Way Barndoors
- 60 ? Honeycomb Grid
| Key features- Blocks Light Transmission
- Approx. 2 Stops More Reflected Light
- Fits Over Open Side of Umbrella
|
| Content | A robust support for overhead illumination such as hair lighting, the Saldo Boom Light Stand from Phottix is two supports in one. With the boom in a vertical position, the stand rises to a maximum height of 12.9'. The boom arm can tilt 180 ?. The tilting mechanism is simple and features a sturdy locking lever, and while extended allows you to position a light above your frame without seeing the stand in the shot. A reversible 5/8" mounting stud, with 1/4"-20 and 3/8"-16 threaded studs, is included, as well as an empty counterweight bag that you can fill on location.The stand is made out of aluminum for strength and portabilityThis stand is well suited for supporting lights, flags, reflectors, and a wide variety of lighting and grip componentsThe top riser arm is attached via a 180 ? mechanism that allows you to use it as a standard light stand, or use the top riser as a boomThe top riser arm has a maximum length of 79.9" when used as a traditional stand; when used as a boom arm, the length is less as you have to balance the weight at the end on the other side of the fulcrumAn included counterweight bag ships empty to save you on weight; you can fill it up to 17.6 lb on location | Quick and easy to set up and capable of producing a beautiful soft light, the 40" Shoot Through Softbox Studio Umbrella from Phottix is a great asset for both studio strobes and speedlights. It features a translucent white material that lets light through as well as a black backing that helps control light spill. This backing has a drawstring opening in order to accommodate the light, and it comes with a carrying bag. | The Phottix 40" Reflective Studio Umbrella is a suitable light modifier, portable flash or studio strobe. It has a black backing on the outside and silver interior for high output. | The main purpose of the AC Module for Indra 500 TTL Studio Light from Phottix is to allow the battery-powered flash head to run anywhere in the world on 100 to 240 VAC mains power. A welcome byproduct of using the Module is the shortening of the Indra's recycling time to 1.5 seconds at full power.The module will also power select shoe mount flashes. Adapter cables are available separately for Phottix Mitros+ (PH01150), Canon (PH01151), Nikon (PH01152), and Sony (PH01153) hot shoe flashes.Since the Module plugs directly into the Indra 500's power pack, you can run one to two Indra 500 TTL heads, one to two hot shoe flashes, or one Indra 500 TTL head and one hot shoe flash at the same time.
Faster Recycle Times
Utilizing the Indra 500 AC Module has the added benefit of reducing the flash head's recycle time to 1.5 seconds at full power, giving it the ability to keep up with even the most fast-paced studio session.
Not Just for Indra 500 TTL
Now photographers can feed AC power directly into hot shoe flashes for fast recycling times, making battery power no longer an issue. Adapter cables are available for Phottix Mitros+ (PH01150), Canon (PH01151), Nikon (PH01152), and Sony (PH01153) hot shoe flashes.
Power Multiple Lights
Because the AC Power Module plugs directly into the Indra 500's power pack, users can power one to two Indra 500 TTL heads, one to two hot shoe flashes, or one Indra 500 TTL head and one hot shoe flash at the same time.
100 to 240 VAC Compatibility
The Indra 500 AC Module can handle input voltages from 100 to 240 VAC, so photographers working in multiple countries can use the mains as a power source wherever and whenever they need it. | Made for the Indra500 and Indra360 TTL monolights, the Barndoors with Grid and Gel Set from Phottix contains a set of four-way barndoors, a 60-degree honeycomb grid, a set of red, yellow, blue and green gels, plus a carry bag. The grid controls spill and adds directional control to the output. It can be used with the barndoors to further direct which parts of the subject are illuminated. The barndoors can also be used on their own. The colored gels can be used creatively for edge lighting or to light backgrounds. | The Black Backing for 33" Premio Shoot-Through Umbrella from Phottix fits over the open side of the umbrella and blocks transmission of light resulting in approximately 2 stops of neutral-colored, reflected output. With the black backing installed, the convex white part of the umbrella is pointed at the subject like a softbox, yielding slightly snappier contrast than traditional bounce umbrellas |
