| Description | Key features- Compatible with Nikon i-TTL
- Works with Odin and Mitros+ Systems
- 2.4 GHz Frequency, 328' Range
- 32 Channels with Digital ID, 5 Groups
| Key features- For Indra500 and Indra360 TTL Lights
- Fits Many 7" Reflectors
- Four-Way Barndoors
- 60 ? Honeycomb Grid
| Key features- Allows Indra to Run on 100 - 240 VAC
- Full Power Recycling: 1.5 Sec
- Also Powers Select On-Camera Flashes
| Key features- Softens and Diffuses Light Output
- Translucent White Material
- Black Backing Controls Light Spill
- Drawstring Opening for Light
| Key features- The 4-Section Compact Light Stand from Phottix extends up to 67? and is ideal for on-location use with hot shoe flashes and small studio lights.
| Key features- White, Gold, & Silver Reflectors
- Black Absorption Panel
- Translucent White Diffusion Panel
- Blue and Green Panels
|
| Content | Realize the full potential of your flash setup by adding wireless triggering and control with the Phottix Odin II TTL Flash Trigger Receiver. Compatible with Nikon's i-TTL flash system and equipped with a 2.4 GHz radio system, the Odin II receiver can be used to integrate shoe-mounted flashes and studio strobes into your setup and can be triggered by the original Odin receiver or Mitros+ flash at distances up to 328'. To further benefit users, it can be used in a multi-system setup that involve Odin TTL, Strato, and Strato II receivers as well as Mitros+, Indra360, and Indra 500 lights. A major improvement over the previous model is an expansion of channels and the introduction of the Digital ID which gives further control over channels 5-32 to eliminate interference with other systems.Embracing TTL communication between the camera and flash, automatic exposures can easily be made and more advanced users can take advantage of manual power and zoom control to dial in the exact look they need. Using the five groups, users can also control different groups and flashes with varying settings as well as mix and match TTL and manual units. All of this is easily accessed via the large LCD screen along with buttons for adjusting settings.Additional features include both high-speed sync for TTL flashes as well as the proprietary OverDrive Sync mode for manual studio strobes, both of which allow users to work at shutter speeds up to 1/8000 second. Also, users will be able to remotely control the modeling light of their Indra TTL strobes as well as use an AF assist light when needed. And, it has a mini-USB port for firmware updates as well as a 3.5mm sync port and a 5 VDC power port. It can also run on two AA batteries.Can be triggered using the Odin II and original Odin transmitter as well as with the Mitros+ transceiver flash with full TTL supportRatio control in A:B mode from 8:1 to 1:8 in 1/2 step incrementsManual power control from 1/1 to 1/128LED indicator lightExposure compensation of 3 EV in 1/3 step increments3.5mm sync portModeling light functionLocking foot with 1/4"-20Runs on two AA batteries | Made for the Indra500 and Indra360 TTL monolights, the Barndoors with Grid and Gel Set from Phottix contains a set of four-way barndoors, a 60-degree honeycomb grid, a set of red, yellow, blue and green gels, plus a carry bag. The grid controls spill and adds directional control to the output. It can be used with the barndoors to further direct which parts of the subject are illuminated. The barndoors can also be used on their own. The colored gels can be used creatively for edge lighting or to light backgrounds. | The main purpose of the AC Module for Indra 500 TTL Studio Light from Phottix is to allow the battery-powered flash head to run anywhere in the world on 100 to 240 VAC mains power. A welcome byproduct of using the Module is the shortening of the Indra's recycling time to 1.5 seconds at full power.The module will also power select shoe mount flashes. Adapter cables are available separately for Phottix Mitros+ (PH01150), Canon (PH01151), Nikon (PH01152), and Sony (PH01153) hot shoe flashes.Since the Module plugs directly into the Indra 500's power pack, you can run one to two Indra 500 TTL heads, one to two hot shoe flashes, or one Indra 500 TTL head and one hot shoe flash at the same time.
Faster Recycle Times
Utilizing the Indra 500 AC Module has the added benefit of reducing the flash head's recycle time to 1.5 seconds at full power, giving it the ability to keep up with even the most fast-paced studio session.
Not Just for Indra 500 TTL
Now photographers can feed AC power directly into hot shoe flashes for fast recycling times, making battery power no longer an issue. Adapter cables are available for Phottix Mitros+ (PH01150), Canon (PH01151), Nikon (PH01152), and Sony (PH01153) hot shoe flashes.
Power Multiple Lights
Because the AC Power Module plugs directly into the Indra 500's power pack, users can power one to two Indra 500 TTL heads, one to two hot shoe flashes, or one Indra 500 TTL head and one hot shoe flash at the same time.
100 to 240 VAC Compatibility
The Indra 500 AC Module can handle input voltages from 100 to 240 VAC, so photographers working in multiple countries can use the mains as a power source wherever and whenever they need it. | Quick and easy to set up and capable of producing a beautiful soft light, the 40" Shoot Through Softbox Studio Umbrella from Phottix is a great asset for both studio strobes and speedlights. It features a translucent white material that lets light through as well as a black backing that helps control light spill. This backing has a drawstring opening in order to accommodate the light, and it comes with a carrying bag. | The 4-Section Compact Light Stand from Phottix extends up to 67? and is ideal for on-location use with hot shoe flashes and small studio lights. | Whether on location or in the studio, a reflector is one of the easiest and most effective methods for controlling your light. The 22" 7-in-1 Light Multi Collapsible Reflector from Phottix provides seven different colors and panels in a single, compact package. For basic bounce, this reflector offers standard white, warming gold, and cooling/crisp silver panels. A black absorption panel is available for use as a flag or to improve overall contrast, and the translucent white diffusion panel will soften the output of your light source. Blue and green panels are suitable for background work and special effects. This reflector is designed to conveniently fold down to 1/3 of its open size for transport or storage in the included carrying case. |
