| Description | Key features- 5/8" Pin
- Steel Construction
| Key featuresCutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. | Key featuresFlags are square or rectangular frames with mounting pins attached. | Key featuresThis is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 6 inches. | Key featuresFlags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. | Key featuresAlso known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. |
| Content | The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The threads end in a Baby (5/8") pin for mounting fixtures or other grip items.
Benefits- Provides strong, solid grip of round, square or rectangular tubing and many other common or irregular shapes
- Rig light fixtures and modifiers to pipe, lumber, set walls, drop ceiling framework, car rigs, etc.
- Rig cameras in tight spots on cars, bikes, and boats using an optional ball head adapter and ball head
- Mount grip heads and arms
- Use as overhead frame support
| Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original sizeNewly designed 90 ? Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. | Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.Newly designed 90 ? Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. | This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 6 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount. | Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.Newly designed 90 ? Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. | Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame.For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light.More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames. |
