Content | The Libec ZC-9PRO Zoom Control is a variable-speed remote zoom that clamps onto a tripod pan handle, stabilizer, or other device and controls both Canon and Fujinon ENG lenses. It includes a REC/RET button, converter switches for REC/RET and Canon/Fujinon, and an 8-pin connector cable. | The Libec ALX S4 is a 15.5" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 15.5" rail for separately available 32.6" or 47" rail lengths.Key Features- 12" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 15.5" rail can be swapped for optional 32.6" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a spreader dolly, and the system is height-adjustable from 36 to 73.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.Libec LX10 Studio Two-Stage Aluminum Tripod System
The sliding balance plate features a total of four inches of balance adjustment. Two inches forward and also two inches back of center. This does not take into account the integrated balance slot. That allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included spreader dolly secures your tripod's legs. But allows you to roll your tripod from one point to another on a smooth surface. It can used during a shot, but it is not as smooth as a true dolly. | The Libec A-9EX Sony PMW EX to Fujinon ENG Lens Adaptor for Zoom Control is a conversion adapter that allows you to connect and gain zoom access to Fujinon's ENG lenses using a Sony PMW-EX camera. | The Libec AS-7K Accessory Support Kit will allow you to attach LCD monitors, microphones, and others accessories to your camera and accessory plate. Using the A7 Accessory Support Adapter included in the kit, AS-7K Accessory Support Kit can also fixed to other Libec heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. With the help of a shoe adapter, the detachable ball head can attached to the camera. The shoe adapter can also attached to the body of an accessory support item when not required.Supports equipment for attaching LCD monitors, microphones, and other accessories to a camera and accessory plate. Includes an A7 Accessory Support Adapter that can used to affix the AS-7K Accessory Support Kit to other heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. Using the shoe adapter, the detachable ball head can attached to cameras. The shoe adapter can also attached to the body of an accessory support item when not required | The LANC 165' CABLE5000 Control Cable from Libec is designed to control the pan/tilt movement of the REMO30 Remote Head. |