Description | Key features- For Professional ENG Canon & Fujinon Lenses
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 43.5" Travel Distance
- 47" Total Track Length
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
| Key features- For Studio Setups
- Compact, Quick & Easy To Set Up
- With Track Locking & Cable Guards
- Large-Sized, Double-Wheel Casters
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 28" Travel Distance
- 32.6" Total Track Length
| Key features- The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily.
|
Content | The Libec ZC-9PRO Zoom Control is a variable-speed remote zoom that clamps onto a tripod pan handle, stabilizer, or other device and controls both Canon and Fujinon ENG lenses. It includes a REC/RET button, converter switches for REC/RET and Canon/Fujinon, and an 8-pin connector cable. | The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.Key Features- 43.5" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| Libec LX10 M Two-Stage Aluminum Tripod System
The Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and also legs come with a mid-level spreader, and the system is height-adjustable from 32 to 67.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fix counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt. You can adjust the fluid head to suit your shooting style or the needs of the shot.The head features discreet pan and also tilt locks. And the removable pan handle can attached to either side of the head by via the built-in rosettes.Libec LX10 M Two-Stage Aluminum Tripod System
The sliding balance plate features a total of four inches of balance adjustment. Two inches forward and two inches back of center. This does not take into account the integrated balance slot. That allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included mid-level spreader prevents the tripod's legs from flying apart. And also is well suited for use one even and uneven surfaces. You can use the mid-level spreader to secure your legs on rocky terrain. As well as on stairs, unlike a ground level spreader, which would prove unstable. | The DL10B Professional Heavy Duty Studio Dolly from Libec is designed to be used with the P110 column. It features a compact, quick and easy-to-setup design for studio setups. It comes equipped with a track locking mechanism and cable guards (height-adjustable). The dolly ensures straight-line movements with lockable caster directions. The dolly comes equipped with large-sized double-wheel casters. | The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.Key Features- 28" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily. This set completes a 90 degree turn, and interfaces perfectly with the Libec track system. |