Description | Key features- The Versatile Length Dolly from Libec is designed for use with RT30B / RT40RB / RT50B / RT50C tripods and allows you to dolly in any direction.
| Key features- For Fujinon Broadcast Lenses, ZC-9Pro, ZC-9EX
| Key features- For Use With Swift Jib50 Weight Bar
| Key features- Compatible with Sony, Canon, and Panasonic 2.5mm LANC
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 28" Travel Distance
- 32.6" Total Track Length
|
Content | The Versatile Length Dolly from Libec is design for use with RT30B / RT40RB / RT50B / RT50C tripods and allows you to dolly in any direction. It features a carrying-handle in the center section for easy lifting and transport. The dolly has a sliding range of up to 7.3" and a weight capacity of 99 lb.Each wheel has a foot-activated lock/release pedal, making it easy to lock down and release without having to bend over. When not in use, it folds for easy storage and transport. Its casters are 4" in diameter, and the rubber tripod attachments are adjustable and are also compatible with select Vinten, Manfrotto, and Sachtler tripods.Carrying-handle structure in the center section7.3" Sliding range99 lb weight capacity4" Casters. Foot-activated lock/release pedals. Allows you to make dolly shots in any direction. Folds together for easy storage and transport. Compatible with select Vinten, Sachtler, and Manfrotto tripods | The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector. | This Clamp Handle for Swift Jib50 Weight Bar from Libec is an accessory for the Swift Jib50 which assures smooth operation from the rear of the Swift Jib50. The clamp handle is clamped to the Swift Jib50's weight bar and a remote control (not included) can be attached to the handle. | This is a 17.5 ft Libec Extension Zoom Cable for 2.5mm LANC, compatible with Sony, Canon, and Panasonic 2.5mm LANC for zoom operations. | Libec LX10 M Two-Stage Aluminum Tripod System
The Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and also legs come with a mid-level spreader, and the system is height-adjustable from 32 to 67.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fix counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt. You can adjust the fluid head to suit your shooting style or the needs of the shot.The head features discreet pan and also tilt locks. And the removable pan handle can attached to either side of the head by via the built-in rosettes.Libec LX10 M Two-Stage Aluminum Tripod System
The sliding balance plate features a total of four inches of balance adjustment. Two inches forward and two inches back of center. This does not take into account the integrated balance slot. That allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included mid-level spreader prevents the tripod's legs from flying apart. And also is well suited for use one even and uneven surfaces. You can use the mid-level spreader to secure your legs on rocky terrain. As well as on stairs, unlike a ground level spreader, which would prove unstable. | The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.Key Features- 28" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
|