Description | Key features- Libec Broadcast CamBag 30 Camera Bag
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 12" Travel Distance
- 15.5" Total Track Length
| Key features- For Studio Setups
- Compact, Quick & Easy To Set Up
- With Track Locking & Cable Guards
- Large-Sized, Double-Wheel Casters
| Key features- For Fujinon Broadcast Lenses, ZC-9Pro, ZC-9EX
| Key features- 6.6 lb Capacity 65mm Half Ball Head
- Sliding Plate with 1/4"-20 Screw & Pin
- 27.8 to 59.3" Height Range
- Dual-Stage Legs with 65mm Bowl
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 43.5" Travel Distance
- 47" Total Track Length
|
Content | | The Libec ALX S4 is a 15.5" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 15.5" rail for separately available 32.6" or 47" rail lengths.Key Features- 12" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 15.5" rail can be swapped for optional 32.6" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The DL10B Professional Heavy Duty Studio Dolly from Libec is designed to be used with the P110 column. It features a compact, quick and easy-to-setup design for studio setups. It comes equipped with a track locking mechanism and cable guards (height-adjustable). The dolly ensures straight-line movements with lockable caster directions. The dolly comes equipped with large-sized double-wheel casters. | The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector. | The 650EX Tripod System with Mid-Level Spreader from Libec features dual-stage tripod legs and a 65mm half ball video head. It supports up to 6.6 lb via a fixed counterbalance system and offers a 27.8 to 59.3" height range. The tripod legs have flip locks and retractable rubber feet with spikes underneath for use on both flat surfaces and soft ground. A removable mid-level spreader is included for additional stability.The fluid head features independent pan and tilt locks, a Manfrotto and Sachtler compatible sliding camera plate, and a bubble level. The 650EX tripod system comes with a soft carrying bag.Key Features- 6.6 lb payload
- 228 to 63.5" height range
- Dual-stage legs with 65mm bowl base
- 65mm half ball fluid head
- Fixed counterbalance
- Independent pan and tilt locks
- Sliding camera plate
- Retractable rubber feet with spikes
- Mid-level spreader
- Bubble level
| The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.Key Features- 43.5" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
|