| Content | | The Libec ALX S4 is a 15.5" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 15.5" rail for separately available 32.6" or 47" rail lengths.Key Features- 12" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 15.5" rail can be swapped for optional 32.6" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec AS-7K Accessory Support Kit will allow you to attach LCD monitors, microphones, and others accessories to your camera and accessory plate. Using the A7 Accessory Support Adapter included in the kit, AS-7K Accessory Support Kit can also fixed to other Libec heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. With the help of a shoe adapter, the detachable ball head can attached to the camera. The shoe adapter can also attached to the body of an accessory support item when not required.Supports equipment for attaching LCD monitors, microphones, and other accessories to a camera and accessory plate. Includes an A7 Accessory Support Adapter that can used to affix the AS-7K Accessory Support Kit to other heads.Suitable positioning of accessories can be achieved by adjusting the fitting angle. Using the shoe adapter, the detachable ball head can attached to cameras. The shoe adapter can also attached to the body of an accessory support item when not required | This Clamp Handle for Swift Jib50 Weight Bar from Libec is an accessory for the Swift Jib50 which assures smooth operation from the rear of the Swift Jib50. The clamp handle is clamped to the Swift Jib50's weight bar and a remote control (not included) can be attached to the handle. | The Control Cable for REMO30 Remote Pan and Tilt Head from Libec is a 16.5' remote control cable that can be used to control the REMO30 pan and tilt head,Control cable for REMO30 pan & tilt remote head, LANC and monitorExtend up to 99' in length (with optional cables) for remote operations with no signal interruptions. | The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.Key Features- 28" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
|
